Troubleshooting guide

MX2820 System Manual
7-92 61186003L1-1D
d. From the Network Management menu, select ETHERNET INTERFACE and press ENTER.
Figure 7-18 shows the Ethernet Interface menu.
Figure 7-18. Ethernet Interface Menu
e. From the Ethernet Interface menu, select IP Address, and press ENTER.
f. Input the IP address, and press ENTER.
g. From the Ethernet Interface menu, select Subnet Mask, and press ENTER.
h. Input the Subnet Mask, and press ENTER.
i. From the Ethernet Interface menu, select Gateway, and press ENTER.
j. Input the Gateway address, and press ENTER.
k. From the Ethernet Interface menu, select Ethernet Data Rate, and press ENTER.
l. From the Ethernet Data Rate menu, select one of the following data rates then press
ENTER:
• 1 for AUTO
• 2 for 10 Mbps
• 3 for 100 Mbps
m.From the Ethernet Interface menu, select INTERFACE ETHERNET LINK MAC ADDRESS, and press
ENTER.
n. From the Interface Ethernet Link MAC Address menu, select one of the following
options, and press
ENTER:
• 1 to Enable
Shelf: 1 ADTRAN MX2820 System 04/26/04 13:44
Unacknowledged Alarms: TID: HTVLALEXD16
Ethernet Interface
1 - IP Address : 10.200.3.32
2 - Subnet Mask : 255.255.0.0
3 - Gateway : 10.200.254.254
Ethernet Data Rate : 10 Mbps
4 - Interface : ENABLE
Ethernet Link : Up
MAC Address : 00:a0:c8:05:03:0a
Selection : '?' - System Help Screen