Troubleshooting guide

Section 7, User Interface Guide - DLP-718, Provision Network Management Settings
61186003L1-1D 7-93
• 2 to Disable
o. Press ESC until the Network Management menu appears, then go to step 4.
4. Provision the Network Service ports.
a. From the Network Management menu, select NETWORK SERVICE PORTS, and press ENTER.
Figure 7-19 shows the Network Service Ports menu.
Figure 7-19. Network Service Ports Menu
b. From the Network Service Ports Screen menu, select TL1 TELNET PORT, and press ENTER.
c. Input a value from 1024 to 65535 to set a Secondary Telnet port, and press ENTER.
d. Press ESC until the Network Management menu appears, then go to step 5.
Shelf: 1 ADTRAN MX2820 System 04/26/04 13:53
Unacknowledged Alarms: TID: HTVLALEXD16
Network Service Ports Screen
1 - TL1 Telnet Port : 2000
2 - TL1 Raw-TCP Port : 2001
3 - Secondary Telnet Port : 2002
Selection : '?' - System Help Screen