Troubleshooting guide

MX2820 System Manual
7-110 61186003L1-1D
6. From the Smart Start menu, input a 1 for the Smart Start provisioning screen - to Disable
or Enable the Smart Start feature, and press
ENTER.
Figure 7-24 shows the Smart Start provisioning screen.
Figure 7-24. Provisioning Smart Start
7. From the Smart Start provisioning screen, input a 2 to enable, or input a 1 to disable the
Smart Start feature, and press
ENTER.
NOTE
The default option for Smart Start is ENABLED. If set to DISABLED, a
new module from the factory will not know to retrieve the data from
the access modules. Factory default provisioning will be utilized by
the new module.
8. Press ESC as required to return to the MX2820 Main Menu.
9. Return to the document that referenced this procedure and continue. Otherwise, this
procedure is complete.
FOLLOW-UP PROCEDURES
Once this procedure is complete, return to the procedure which called out this DLP and
continue with the tasks indicated.
Shelf: 1 ADTRAN MX2820 System 04/26/04 14:11
Unacknowledged Alarms: None TID: HTVLALEXD16
Smart Start : ENABLE
1 - DISABLE
2 - ENABLE
Selection : '?' - System Help Screen