Troubleshooting guide

Section 7, User Interface Guide - DLP-730, Provision DS3/DS2 Network
61186003L1-1D 7-113
4. From the Access Module Menus, select the slot number for the M13 MUX module that is
to be provisioned, and press
ENTER.
Figure 7-26 shows the Access Modules Main Menu screen.
Figure 7-26. Access Modules Main Menu
5. From the Access Module Main Menu, select PROVISIONING and press ENTER.
Figure 7-27 shows the Access Modules Provisioning menu.
Figure 7-27. Access Module Provisioning Menu
Shelf: 1 ADTRAN MX2820 System 05/04/04 09:29
Unacknowledged Alarms: None TID: HTVLALEXD16
Main Menu
1 - Configuration
2 - Provisioning
3 - Status
4 - Test
5 - Performance Monitoring
Selection: '?' - System Help Screen
Shelf: 1 Slot: 1A ADTRAN MX2820 System 04/26/04 16:26
Unacknowledged Alarms: None TID: HTVLALEXD16
Provisioning
1 - Network Interface
2 - T1/E1 Interfaces
3 - Service States
4 - Protection
5 - Save Provisioning
6 - Restore Factory Defaults
7 - Card Reset
8 - Auto Save : Enabled
9 - Loopback Timeout : 60 minutes
10 - Card Pair ID : MX2820 M13
Selection: '?' - System Help Screen