Troubleshooting guide

MX2820 System Manual
7-126 61186003L1-1D
13. From the ifIndex Method menu, input one of the following values, and press ENTER:
• 1 - Sequential (RFC2863)
• 2 - Fixed (Slot-based)
14. From the SNMP menu, select SCU TRAPS.
15. From the SCU Traps menu, input one of the following values, and press
ENTER:
•1 - Enable SCU Traps
• 2 - Disable SCU Traps
When disabled, the MX2820 system ignores all incoming SNMP packets, and does not
transmit SNMP packets.
16. From the SNMP menu, select SYSTEM NAME.
17. Input alphanumeric characters that identify the name of the MX2820 system, and press
ENTER.
18. From the SNMP menu, select
SYSTEM LOCATION.
19. Input alphanumeric characters that identify the physical location of the MX2820 system,
and press
ENTER.
20. From the SNMP menu, select
SYSTEM CONTACT.
21. Input the name of personnel to contact about the MX2820 system, and press
ENTER.
22. From the SNMP menu, select
READ COMMUNITY.
23. Input a value for the Read Community, and press
ENTER.
Enter the authentication string used for SNMP management. Match the MX2820 system
to the SNMP manager for read privileges. Examples include public and private.
24. From the SNMP menu, select WRITE COMMUNITY.
25. Input a value for the Write Community, and press
ENTER.
Enter the authentication string used for SNMP management. Match the MX2820 system
to the SNMP manager for write privileges. Examples include public and private.
26. Press ESC as required to return to the MX2820 Main Menu.
FOLLOW-UP PROCEDURES
Once this procedure is complete, return to the procedure which called out this DLP and
continue with the tasks indicated.