Troubleshooting guide

61186003L1-1D 7-133
DLP-734
Set Security Options
INTRODUCTION
This procedure provides step-by-step instructions to set security options for the MX2820
system.
NOTE
It is recommended that the system or network administrator per-
form the steps in this procedure. The personnel using this proce-
dure must logon to the MX2820 system with the ADMIN account.
PREREQUISITE PROCEDURES
Obtain all necessary local instructions before setting security options. Prerequisite infor-
mation includes the following:
• Simple Network Management Protocol (SNMP) access
• User lockout on login failure
• Case sensitive password or user ID
• Null password accepted
• Number of login failures before lockout
• Lockout duration
• RADIUS server address (if equipped)
PROCEDURE
1. From the MX2820 Main Menu, select SYSTEM CONTROLLER and press ENTER.
2. From the System Controller menu, select PROVISIONING.
3. From the Provisioning menu, select
GENERAL.