Manualshelf

Troubleshooting guide

ManualsBrandsADTRAN ManualsNetworkingMX2820
391392393394395396397398399400
Section 7, User Interface Guide - DLP-734, Set Security Options
61186003L1-1D 7-135
6. Make the following changes, as required locally, from the Security Options menu
a. To allow SNMP access, select the ENABLE SNMP SECURITY ACCOUNT ACCESS option, and press
ENTER.
This option toggles between Yes and No. If set to No, inputting the option number
changes the value to Yes. If set to Yes, inputting the option number changes the value
to No.
b. To lock out a user on failed login attempt, select the LOCK-OUT USER ON LOGIN FAILURE
option, and press
ENTER.
This option toggles between Yes and No. If set to No, the value changes to Yes. If set to
Yes, the value changes to No.
c. TO HAVE A CASE-SENSITIVE ACCOUNT NAME OR PASSWORD, SELECT THE CASE Sensitive Password/
User-ID option, and press
ENTER.
This option toggles between Yes and No. If set to No, changing the value to No will allow
any character case. If set to Yes, The exact character, including case (capital or lower
case) is required.
d. To allow a password to be bypassed by simply hitting the ENTER key, select the NULL
P
ASSWORD ACCEPTED option, and press ENTER.
This option toggles between Yes and No. If set to No, a password is required for access
to the system. If set to Yes, a password is not required.
e. If the LOCK-OUT USER ON LOGIN FAILURE option (step b) is set to Yes, then the NUMBER OF LOGIN
FAILURE BEFORE LOCKOUT can be set. Select this option, and press ENTER.
Input a value from 2 to 5 to set the maximum number of login failures before a user is
prohibited from logging into system, and press
ENTER.
f. If the LOCK-OUT USER ON LOGIN FAILURE option (step b) is set to Yes, then the LOCK-OUT
DURATION IN SECONDS can be modified. Select this option, and press ENTER.
g. Input a value from 3 to 60 to set the lock-out duration in seconds, and press ENTER.
7. Press ESC as required to return to the MX2820 Main Menu.
FOLLOW-UP PROCEDURES
Once this procedure is complete, return to the procedure which called out this DLP and
continue with the tasks indicated.