Troubleshooting guide

61186003L1-1D 7-137
DLP-735
Set Terminal Automatic Logoff
INTRODUCTION
This procedure provides step-by-step instructions to set the time that a terminal connected to
the MX2820 system is automatically logged off the system if the terminal is not being used.
NOTE
It is recommended that the system or network administrator per-
form the steps in this procedure. The personnel using this proce-
dure must logon to the MX2820 system with the ADMIN account.
PREREQUISITE PROCEDURES
Obtain all necessary local instructions before setting the terminal/Auto Logoff feature.
PROCEDURE
1. If not already connected, connect VT100 terminal or PC to the craft port. For details, refer
to
DLP-715.
2. Logon to the MX2820 system with an ADMIN account. For details, refer to DLP-716.
3. From the MX2820 Main Menu, select
SYSTEM CONTROLLER.
4. From the System Controller menu, select
PROVISIONING.