Troubleshooting guide
61186003L1-1D 7-141
DLP-736
Change Password
INTRODUCTION
This procedure provides step-by-step instructions to change the password for the logged-in
user.
NOTE
It is recommended that the system or network administrator per-
form the steps in this procedure. The personnel using this proce-
dure must logon to the MX2820 system with the ADMIN account.
PREREQUISITE PROCEDURES
Obtain all necessary local instructions before changing the password.
PROCEDURE
1. If not already connected, connect VT100 terminal or PC to the craft port. For details, refer
to
DLP-715.
2. Logon to the MX2820 system. For details, refer to DLP-716.
3. From the MX2820 Main Menu, select
SYSTEM CONTROLLER, and press ENTER.
4. From the System Controller menu, select
PROVISIONING.