Troubleshooting guide

Section 7, User Interface Guide - DLP-742, Provision VT/Port (T1/E1) Interface
61186003L1-1D 7-165
5. From the Main Menu screen, select PROVISIONING and press ENTER.
Figure 7-61 shows the Provisioning menu.
Figure 7-61. STS-1 Provisioning Menu
6. From the Provisioning menu, select VT/PORT INTERFACES.
Figure 7-62 shows the resulting VT/Port Provisioning menu.
Figure 7-62. VT/Port Provisioning Menu
Shelf: 1 Slot: 4A ADTRAN MX2820 System 04/26/04 17:18
Unacknowledged Alarms: None TID: HTVLALEXD16
Provisioning
1 - Network Interface
2 - VT/Port Interfaces
Service States
4 - Protection
5 - Save Provisioning
6 - Restore Factory Defaults
7 - Card Reset
8 - Auto Save : Enabled
9 - Loopback Timeout : 5 minutes
10 - Card Pair ID : MX2820 STS1
Selection: '?' - System Help Screen
Shelf: 1 Slot: 5A ADTRAN MX2820 System 10/10/00 00:05
Unacknowledged Alarms: MAJOR TID: SysName not set
VT/Port Provisioning
1 - T1/E1 State
2 - T1/E1 Line Coding
3 - T1/E1 Line Length
4 - T1/E1 Loopback Detection
5 - T1/E1 Circuit Protection
6 - T1/E1 Line Identification
7 - VT Identification
8 - T1/E1 XCV Threshold : Disabled
9 - VT Hairpin Loopback
10 - VT Cross-Connect Mapping
11 - VT AIS Transmission : Enabled (GR-253)
Selection: '?' - System Help Screen