Troubleshooting guide

MX2820 System Manual
7-172 61186003L1-1D
8. From the Clock Provisioning Menu screen, select SERVICE STATES and press ENTER.
Figure 7-66 shows the Service States menu.
Figure 7-66. Service States Menu
9. Provision the Primary and Secondary Failure Alarms as DISABLED for unused clock input(s).
10. Press
ESC as required to return to the MX2820 Main Menu.
NOTE
A complete description of Service States is available in the MX2820
TL1 Reference Guide, Manual Number 61186003L1-35.
FOLLOW-UP PROCEDURES
Once this procedure is complete, return to the procedure which called out this DLP and
continue with the tasks indicated.
Shelf: 1 Slot: CLK A ADTRAN MX2820 System 03/22/05 11:40
Unacknowledged Alarms: NONE TID: HTVLALEXD16
Service States
1 - Card CLK A Equipment Provisioned State : IS
Card CLK A Equipment Functional State : IS-ANR
2 - Card CLK B Equipment Provisioned State : IS (Card not installed)
Card CLK B Equipment Functional State : (Card not installed)
3 - Primary Clock Failure Alarm : Enable
4 - Secondary Clock Failure Alarm : Disable
Selection: '?' - System Help Screen