Troubleshooting guide

61186003L1-1D 7-177
DLP-745
Provision RADIUS
INTRODUCTION
This procedure provides step-by-step instructions to provision the RADIUS server via the
MX2820 SCU Main Menu.
Follow these steps if RADIUS is implemented in the system.
PREREQUISITE PROCEDURES
Obtain all necessary local instructions before provisioning RADIUS.
The applicable prerequisite procedure is the following:
• “NTP-006, SCU Provisioning (System Security)”
RADIUS PROVISIONING DATA
For complete descriptions of the RADIUS provisioning requirements, refer to “UIG-560,
RADIUS”.
PROCEDURE
1. If not already connected, connect the VT100 terminal or PC to the craft port. For details,
refer to
DLP-715.
2. Logon to the MX2820 system. For details, refer to DLP-716.
3. From the MX2820 Main Menu, select
SYSTEM CONTROLLER and press ENTER.
4. Select
PROVISIONING from the System Controller menu.
5. Select
GENERAL from the Provisioning menu.
6. Select
SECURITY ADMINISTRATION from the General menu.