MX 3RM M NE T MX 3RM M NE T ETHE RNET ETHE RNET ® MX3216 System Manual Part Number: 61189008L1-1B February 2007
MX3216 System Manual Trademarks Front Matter Any brand names and product names included in this manual are trademarks, registered trademarks, or trade names of their respective holders. To the Holder of the Manual The contents of this publication are current as of the date of publication. ADTRAN® reserves the right to change the contents without prior notice.
Revision History Revision Date A October 2006 B February 2007 Description Initial release Corrected the number of characters for the system ID. Conventions The following typographical conventions are used in this document: This font indicates a cross-reference link. This font indicates screen menus, fields, and parameters. THIS FONT indicates keyboard keys (ENTER, ESC, ALT).
MX3216 System Manual Training ADTRAN offers training courses on our products. These courses include overviews on product features and functions while covering applications of ADTRAN’s product lines. ADTRAN provides a variety of training options, including customized training and courses taught at our facilities or at customer sites. For inquiries concerning training, contact ADTRAN: Training Phone: 800-615-1176, ext. 6996 Training Fax: 256-963-6217 Training Email: training@adtran.
Contents Section 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MX3216 System Manual Drop and Insert Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6 Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 MX3RMM Data Path Block Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9 MX3216 with Remote Management Application . .
Contents Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5 Menu Trees. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-5 Menu Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MX3216 Main Menu . . . . . . . .
MX3216 System Manual Environmental Alarms Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-94 Auxiliary Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-95 Power Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-96 Firmware Upgrade Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figures Figures Figure 1-1. Figure 1-2. Figure 1-3. Figure 3-1. Figure 3-2. Figure 3-3. Figure 3-4. Figure 3-5. Figure 3-6. Figure 3-7. Figure 3-8. Figure 3-9. Figure 3-10. Figure 3-11. Figure 3-12. Figure 3-13. Figure 3-14. Figure 3-15. Figure 3-16. Figure 4-1. Figure 4-2. Figure 4-3. Figure 4-4. Figure 4-5. Figure 4-6. Figure 4-7. Figure 4-8. Figure 4-9. Figure 5-1. Figure 5-2. Figure 5-3. Figure 6-1. Figure 6-2. Figure 6-3. Figure 6-4. Figure 6-5. Figure 6-6. Figure 6-7. Figure 6-8. Figure 6-9.
MX3216 System Manual Figure 6-16. Figure 6-17. Figure 6-18. Figure 6-19. Figure 6-20. Figure 6-21. Figure 6-22. Figure 6-23. Figure 6-24. Figure 6-25. Figure 6-26. Figure 6-27. Figure 6-28. Figure 6-29. Figure 6-30. Figure 6-31. Figure 6-32. Figure 6-33. Figure 6-34. Figure 6-35. Figure 6-36. Figure 6-37. Figure 6-38. Figure 6-39. Figure 6-40. Figure 6-41. Figure 6-42. Figure 6-43. Figure 6-44. Figure 6-45. Figure 6-46. Figure 6-47. Figure 6-48. Figure 6-49. Figure 6-50. Figure 6-51. Figure 6-52.
Figures Figure 6-65. Figure 6-66. Figure 6-67. Figure 6-68. Figure 6-69. Figure 6-70. Figure 6-71. Figure 6-72. Figure 6-73. Figure 6-74. Configuration Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-104 Provisioning Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-105 Network Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MX3216 System Manual Tables Table 1-1. Table 1-2. Table 1-3. Table 1-4. Table 2-1. Table 2-2. Table 2-3. Table 2-4. Table 2-5. Table 2-6. Table 2-7. Table 2-8. Table 2-9. Table 2-10. Table 2-11. Table 2-12. Table 3-1. Table 3-2. Table 3-3. Table 3-4. Table 3-5. Table 4-1. Table 4-2. Table 5-1. Table 5-2. Table 6-1. Table 6-2. Table 6-3. Table 6-4. Table 6-5. Table 6-6. Table 6-7. Table 6-8. Table 6-9. Table 6-10. Table 6-11. Table 6-12. Table 6-13. Table 6-14. Table 6-15. Table 6-16. Table 6-17.
Tables Table 6-22. Table 6-23. Table 6-24. Table 6-25. Table 6-26. Table 6-27. Table 6-28. Table 6-29. Table 6-30. Table 6-31. Table 6-32. Table 6-33. Table 6-34. Table 6-35. Table 6-36. Table 6-37. Table 6-38. Table 6-39. Table 6-40. Table 6-41. Table 6-42. Table 6-43. Table 6-44. Table 6-45. Table 6-46. Table 6-47. Table 6-48. Table 6-49. Table 6-50. Table 6-51. Table 6-52. Table 6-53. Table 6-54. Table 6-55. Table 6-56. Table 6-57. Table 6-58. Table 6-59. Table 6-60. Table 6-61. Table 6-62. Table 6-63.
MX3216 System Manual Table 6-71. Table 6-72. Table 6-73. Table 6-74. Table 6-75. Table 6-76. Table 6-77. Table 6-78. Table 6-79. Table 6-80. Table 6-81. Table 6-82. Table 6-83. Table 6-84. xiv TFTP Update Status Screen Hot Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-101 MX3RMM Main Menu Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-102 Configuration Screen Fields . . . . . . . . . . . . . . .
Section 1 Introduction INTRODUCTION Drop and insert DS3 networking is practical and efficient with the MX3216 system (see Figure 1-1). The MX3216 system routes DS1s between the two DS3 interfaces with access to 22 DS1s at any node. The MX3216 interfaces to two coaxial DS3s and provides the ability to drop and insert up to 22 DS1 signals from either DS3 interface on the terminal side.
MX3216 System Manual Table 1-1 lists the products supported in this document. For detailed specification information on the products listed, refer to “Engineering Guidelines” on page 2-1. Table 1-1.
Section 1, Introduction - Front Panels FRONT PANELS The MX3216 system has six LEDs and an ACO button on the MX3216 Controller Card and two LEDs on the MX3 remote management module. MX3216 Controller Card LEDs The MX3216 Controller Card has six LEDs located on the front of the unit (see Figure 1-2) that display status information. Table 1-2 shows the LED status descriptions for the active MX3216 Controller Card. Table 1-3 shows the status descriptions for the standby controller card. Figure 1-2.
MX3216 System Manual Table 1-2.
Section 1, Introduction - Front Panels MX3 Remote Management Module The MX3RMM has two LEDs located on the front of the unit (see Figure 1-3) that display status information. The NET LED displays status information about both network interfaces. If one of the network interfaces is disabled, the NET LED shows only information concerning the enabled network interface. Table 1-4 shows the status descriptions for the MX3RMM. MX3RMM NET ETHERNET Figure 1-3. MX3RMM LEDs Table 1-4.
MX3216 System Manual This page is intentionally blank.
Section 2 Engineering Guidelines INTRODUCTION This section provides engineering guidelines for network designers who are incorporating an MX3216 system into their network.
MX3216 System Manual DIMENSIONS OF EQUIPMENT Table 2-1 provides the dimensions and weights of the MX3216 equipment. Table 2-1. MX3216 Equipment Dimensions and Weights Part Number Description Dimensions Weight 1189001L1 MX3 Chassis Height: 1.7 inches Width: 17.0 inches Depth: 8.6 inches 5.50 pounds 1189004L1 MX3 Remote Management Module Height: 0.7 inches Width: 5.2 inches Depth: 7.6 inches 0.375 pounds 1189005L1 MX3 Controller Blank Plug Height: 0.7 inches Width: 9.4 inches Depth: 7.
Section 2, Engineering Guidelines - Power Requirements POWER REQUIREMENTS The following two sections detail the power requirements for the MX3216 Controller Card, the MX3RMM, and the MX3216 system. Module Configurations Table 2-3 provides the current draw of each module at –48 VDC (operating range of –42 VDC to –60 VDC) and ±24 VDC (operating range of ±22 VDC to ±27 VDC). Table 2-3.
MX3216 System Manual POWER DISSIPATION The following two sections detail the power dissipation requirements for the MX3216 Controller Card, the MX3RMM, and the MX3216 system. Module Configurations Table 2-5 provides the heat dissipation data for each module at –48 VDC (operating range of –42 VDC to –60 VDC) and ±24 VDC (operating range of ±22 VDC to ±27 VDC). Table 2-5. Heat Dissipation Part Number Equipment Heat Dissipation at –48 VDC Heat Dissipation at ±24 VDC 1189004L1 MX3RMM 3.0 watts 3.
Section 2, Engineering Guidelines - Fuse Recommendations FUSE RECOMMENDATIONS Table 2-7 provides data for determining the recommended fuse for the fuse and alarm panel that services the MX3 chassis. Table 2-7. Fuse Recommendations System Voltage Recommended Fuse –48 VDC 1.5 amps, slow-blow ±24 VDC 3.0 amps, slow-blow DS3 CONNECTIONS CAUTION Do not connect DSX-1, DS3, or Ethernet circuits from the MX3216 directly to outside plant facilities.
MX3216 System Manual DSX-1 CONNECTIONS WARNING Do not metallically connect the T/R (DSX-1) interfaces to interfaces which connect to the Outside Plant (OSP) or its wiring. These interfaces are designed for use as intra-building interfaces only. The addition of Primary Protectors is not sufficient protection in order to connect these interfaces metallically to OSP wiring. Table 2-8 provides the amphenol connector pin assignments for the MX3216 Controller Card. Table 2-8.
Section 2, Engineering Guidelines - Compliance COMPLIANCE The MX3216 system complies with NEBS Level 3 and is NRTL Listed to UL 60950. It is intended to be installed in a restricted access area only. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
MX3216 System Manual Table 2-11. MX3 Fan Module (P/N 1189007L1) Code Input Output Power Code (PC) F – Telecommunication Code (TC) – – Installation Code (IC) A – Table 2-12.
Section 3 Application Guidelines INTRODUCTION The MX3216 system can operate in a variety of applications.
MX3216 System Manual MX3216 DATA PATH BLOCK DIAGRAM The MX3216 contains a 3/1 cross-connect that allows DS1s to be mapped between two DS3s, eight DSX-1 ports, and two expansion slots in the MX3 chassis (see Figure 3-1).
Section 3, Application Guidelines - MX3216 Data Path Block Diagram Drop and Continue Application In the drop and continue application, up to eight DS1s from one DS3 can be dropped out the eight DSX-1 ports with the remaining DS1s continuing through to the other DS3 interface (see Figure 3-2). This allows one DS3 worth of bandwidth to deliver DS1s to several sites using one MX3216 at each site.
MX3216 System Manual Setup The following steps outline the rear chassis connections (see Figure 3-3). BNC Connectors Amphenol Connectors Figure 3-3. Rear Chassis Connections 1. Connect the incoming DS3 (the DS3 from which the DS1s are dropped) to the DS3 A BNCs. 2. Connect the outgoing DS3 to the DS3 B BNCs. 3. Connect the DS1s using the amphenol connectors on the rear panel. For more information, refer to “Rear Chassis Connections” on page 4-7.
Section 3, Application Guidelines - MX3216 Data Path Block Diagram Card: Controller A Unacknowledged Alarms: None ADTRAN MX3216 System ID: MM/DD/YY hh:mm Site 1 MX3216 MX3216->Quick Setup 1 2 3 4 5 6 7 8 - # # # # # # # # 1 2 3 4 5 6 7 8 DS1 Ports 9 10 11 12 13 14 15 16 - : : : : : : : : System 17 - System ID 18 - IP Address 19 - Subnet Mask 20 - Gateway 21 - Date 22 - Time : : : : : : Module Drops (None Installed) # 9 #10 #11 #12 #13 #14 #15 #16 : : : : : : : : Site 1 MX3216 0.0.0.0 255.255.
MX3216 System Manual Drop and Insert Application In the drop and insert application (see Figure 3-6), DS1s from one DS3 can be dropped out the DSX-1 ports. Then, DS1s from the other DSX-1 ports can be inserted into the corresponding DS1s in the other DS3. Any DS1s not dropped continue on from one DS3 to the other. This application allows a DS3 to be used to transport DS1s between several sites.
Section 3, Application Guidelines - MX3216 Data Path Block Diagram Setup The following steps outline the rear chassis connections (see Figure 3-3 on page 3-4). 1. Connect the DS3 from which the DS1s are dropped to the DS3 A BNCs. 2. Connect the other DS3 to the DS3 B BNCs. 3. Connect the DS1s using the amphenol connector on the rear panel. For more information, refer to “Rear Chassis Connections” on page 4-7.
MX3216 System Manual Card: Controller A Unacknowledged Alarms: None ADTRAN MX3216 System ID: MM/DD/YY hh:mm Site 1 MX3216 MX3216->Quick Setup 1 2 3 4 5 6 7 8 - # # # # # # # # 1 2 3 4 5 6 7 8 DS1 Ports 9 10 11 12 13 14 15 16 - : : : : : : : : System 17 - System ID 18 - IP Address 19 - Subnet Mask 20 - Gateway 21 - Date 22 - Time : : : : : : Module Drops (None Installed) # 9 #10 #11 #12 #13 #14 #15 #16 : : : : : : : : Site 1 MX3216 0.0.0.0 255.255.255.0 0.0.0.
Section 3, Application Guidelines - MX3RMM Data Path Block Diagram MX3RMM DATA PATH BLOCK DIAGRAM Figure 3-9 shows that the MX3 Remote Management Module (MX3RMM) contains an Ethernet bridge that bridges between two Ethernet jacks, two T1/FT1 interfaces, and the MX3216 Controller Card. One of the Ethernet jacks is on the front panel of the MX3RMM and the other is on the rear panel of the MX3 chassis. The Ethernet traffic is encapsulated in Point-to-Point Protocol (PPP) for transport over the T1/FT1.
MX3216 System Manual The following applications are related to the MX3RMM Data Path Block Diagram: • “MX3216 with Remote Management Application” on page 3-11 • “Remote Management of Other Systems Using Terminal Server Ports Application” on page 3-15 3-10 61189008L1-1B
Section 3, Application Guidelines - MX3RMM Data Path Block Diagram MX3216 with Remote Management Application The MX3RMM provides the capability to remotely manage the MX3216 system. The MX3RMM bridges Ethernet traffic between two Point-to-Point Protocol (PPP) over T1/FT1 (Fractional T1) interfaces, a front panel Ethernet jack, and the rear chassis Ethernet jack. The Ethernet traffic is encapsulated in PPP for transport over the T1/FT1.
MX3216 System Manual Setup The following steps describe the setup for the MX3216 with remote management application. 1. In the Quick Setup menu, set the IP address, subnet mask, and gateway for the MX3216 system. These should be available from the network administrator. 2. There should be one DS1 in the DS3s that carries the PPP traffic (Ethernet traffic) as either a full T1 or fractional T1 (FT1). Map this DS1 to the DS1 interfaces for the MX3RMM.
Section 3, Application Guidelines - MX3RMM Data Path Block Diagram Figure 3-13 through Figure 3-15 show an example of setting up a remote management application. Figure 3-13 shows the Quick Setup menu before any IP settings have been established. It also shows a possible cross-connect mapping where several DS1s are dropped.
MX3216 System Manual Figure 3-15 shows the mapping of the MX3RMM T1/FT1 interfaces to the DS1 carrying the Ethernet traffic through the DS3s. DS1 #28 in both DS3s is the DS1 that is carrying the Ethernet traffic to other sites. The MX3RMM is installed in Expansion Slot A (bottom slot). The MX3RMM Network Interface A (MA1) is mapped to DS1 #28 in DS3 A. The MX3RMM Network Interface B (MA2) is mapped to DS1 #28 in DS3 B.
Section 3, Application Guidelines - MX3RMM Data Path Block Diagram Remote Management of Other Systems Using Terminal Server Ports Application This application is an extension of the “MX3216 with Remote Management Application” on page 3-11. In the remote management of other systems using terminal server ports application, the terminal server ports on the MX3RMM provide remote management of other equipment at the same site.
MX3216 System Manual Setup The following steps describe the setup for the remote management of other systems using terminal server ports application. 1. Setup remote management for the MX3216 system using the setup for the “MX3216 with Remote Management Application” on page 3-11. 2. Connect the MX3RMM terminal server port to the RS-232 craft port of the other equipment. Table 3-5 shows the pin assignments for each of the RS-232 interfaces. NOTE Obtain RJ-45 to DB9 adapters from a third party vendor (i.e.
Section 4 Installation INTRODUCTION C A U T I O N ! SUBJECT TO ELECTROSTATIC DAMAGE OR DECREASE IN RELIABILITY. HANDLING PRECAUTIONS REQUIRED. CAUTION Electronic units can be damaged by ESD. When handling units, wear an antistatic discharge wrist strap to prevent damage to electronic components. Place units in antistatic packing material when transporting or storing. When working on units, always place them on an approved antistatic mat that is electrically grounded.
MX3216 System Manual Required Tools • 1/2” open end wrench • No. 1 phillips-head screwdriver • No. 2 phillips-head screwdriver • 3/16” blade screwdriver • Voltmeter • Ohmmeter accurate to 0.1 ohm INSTALLING THE MX3 CHASSIS The following sections detail the steps needed to install and power up the MX3 chassis. Installation The MX3 chassis provides two options for mounting.
F R O N T B A C K Section 4, Installation - Installing the MX3 Chassis B A F R O N T B A C K Figure 4-1. 19-inch Rack Applications B A Figure 4-2.
MX3216 System Manual Wallmount Installation For a wallmount installation, perform the following steps: 1. Attach the mounting brackets to the side of the MX3 chassis using the two screws provided for each bracket (see Figure 4-3). 2. Position the assembly on the wall with the MX3216 system front panel facing up. 3. Use the appropriate wallmount screws to mount the chassis to the wall. Figure 4-3.
Section 4, Installation - Installing the MX3 Chassis NOTE A readily accessible disconnect device, such as a rackmount fuse and alarm panel that is suitably approved and rated, should be incorporated into the fixed wiring. Connect to a reliably grounded –48 VDC or ±24 VDC source which is electrically isolated from the AC source. The branch circuit overcurrent protection should be a fuse or circuit breaker rated –48 VDC, 1.5 amp slow-blow or ±24 VDC, 3 amp slow-blow. a.
MX3216 System Manual a. Install appropriate fuses in the slots in the fuse and alarm panel that services the MX3 chassis (see Figure 4-5). Figure 4-5. Fuse and Alarm Panel b. Using a voltmeter, place the common (normally black) lead on the RET A post of the DC power terminal block and the DC volts (normally red) lead on the PWR A post of the DC power terminal block. For a –48 VDC supply, the reading should be in the operating range of –42 VDC to –60 VDC.
Section 4, Installation - Installing the MX3 Chassis Rear Chassis Connections Figure 4-6 illustrates the rear panel and identifies the following equipment: 1. Four sets of BNC connectors 2. Ethernet port 3. Wire-wrap pins for alarms (critical, major, and minor) 4. Wire-wrap pins for external auxiliary inputs 5. Two 64-pin female amphenol connectors 6. Ground lug for earth ground connection 7. Terminal strip for DC power feed (A and B) 1 2 3 4 5 6 7 Figure 4-6.
MX3216 System Manual 3. The DSX-1 interfaces are 64-pin amphenol connectors. These interfaces provide Tx and Rx connections between the unit and equipment, such as wire-wrap patch panels, punchdown panels, or breakout panels. Connect the DSX-1 interfaces to the 64-pin T/R (IN) and T/R (OUT) amphenol receptacles (female). The MX3216 system uses T/R (IN)/(OUT) amphenol connectors, pins 1–16 and 33–48, for DSX-1 ports 1–16 (see Table 4-1). Table 4-1.
Section 4, Installation - Installing the MX3 Chassis 5. Connect the AUX INPUTS (1–8) used by the MX3216 system for Auxiliary Alarms 1-4. These pins sense open and closed relay contacts and are not polarity sensitive. Table 4-2 shows the pin assignments for the alarm inputs. NOTE Each alarm input defaults to a severity level of major. The severity level can be changed on the “Environmental Alarms Menu”. Assign any alarm input to function as an alarm cut-off (ACO). Table 4-2.
MX3216 System Manual INSTALLING CARDS AND MODULES The MX3216 system is designed with hot-swappable controller cards and modules. This section provides installation procedures for the different components of the MX3216 system.
Section 4, Installation - Installing Cards and Modules Installing the MX3216 Controller Card The MX3216 Controller Card occupies a controller slot in the MX3 chassis. Follow the steps listed below to install the MX3216 Controller Card. Figure 4-8 illustrates the installation of the controller card. 1. If present, remove the blank plug (P/N 1189005L1) from the appropriate controller slot.
MX3216 System Manual Installing the MX3RMM The MX3RMM occupies an expansion slot in the MX3 chassis. Follow the steps listed to install the MX3RMM used with remote management applications. Figure 4-9 illustrates the installation of the MX3RMM. 1. If present, remove the blank plug (P/N 1189006L1) from the appropriate expansion slot. NOTE A blank plug must be installed in the empty expansion slot. 2. Open the ejector latch on the left side of the MX3RMM front panel. 3.
Section 5 Provisioning INTRODUCTION This section provides provisioning defaults and provisioning options for the cross connect of the MX3216 system as follows: • “Provisioning Defaults” on page 5-1 • “Cross-Connect Methods” on page 5-5 PROVISIONING DEFAULTS Table 5-1 lists the MX3216 system default provisioning options. For detailed information on the MX3216 menus, refer to “Section 6, User Interface”. Table 5-1.
MX3216 System Manual Table 5-1.
Section 5, Provisioning - Provisioning Defaults Table 5-1.
MX3216 System Manual Table 5-2 shows the MX3RMM default provisioning options. Table 5-2.
Section 5, Provisioning - Cross-Connect Methods CROSS-CONNECT METHODS The Cross-Connect menu (see Figure 5-1) allows provisioning of the 3/1 cross connect. Establish connections between the DS3s, rear panel DSX-1 drops, and module card DS1s as shown in Figure 3-1 on page 3-2. With some restrictions, any DS1 can be connected to any other DS1. The restrictions are as follows: • DS1s in the same DS3 cannot be connected. • DS1 ports cannot be connected to other DS1 ports (DSX-1 drops).
MX3216 System Manual Card: Controller A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 MX3216->Provisioning->Cross-Connect DS1 Ports Module Cards 1 - DS1 #1 = 17 - Module A #1 = 2 - DS1 #2 = 18 - Module A #2 = 3 - DS1 #3 = 19 - Module A #3 = 4 - DS1 #4 = 20 - Module A #4 = 5 - DS1 #5 = 6 - DS1 #6 = 21 - Module B #1 = 7 - DS1 #7 = 22 - Module B #2 = 8 - DS1 #8 = 23 - Module B #3 = 9 - DS1 #9 = 24 - Module B #4 = 10 - DS1 #10 = 11 - DS1 #11 = 12 - DS1 #12 = 13 - DS1 #13
Section 5, Provisioning - Cross-Connect Methods Method 1 1. To make a new connection, toggle through the menus to find the first DS1 in the connection (see Figure 5-1). • If the first DS1 is part of an existing connection, a prompt appears to confirm the removal of the existing connection. • If a connection was destroyed, the first DS1 has to be selected again to create a new connection. 2. Once the DS1 is selected, choose the second DS1 in the connection by specifying the group and the DS1.
MX3216 System Manual This page is intentionally blank.
Section 6 User Interface INTRODUCTION This section provides detailed information on the following: • “System Management” on page 6-1 • “Logging on to the MX3216” on page 6-3 • “Menu Structure” on page 6-4 • “Menu Navigation” on page 6-5 • “Menu Trees” on page 6-5 • “Menu Descriptions” on page 6-19 SYSTEM MANAGEMENT MX3216 system management and provisioning is facilitated by a series of intuitive menus that are accessible on a computer screen. The MX3216 provides three methods for management access.
MX3216 System Manual Most personal computers or laptops can run communications software that emulates a VT100 terminal. Windows programs such as Terminal or HyperTerminal are two such examples in the Windows format, but there are many other adequate, commercially available software packages, virtually all of which allow the PC or laptop to emulate a VT100 terminal. Certain configuration items must be set on a PC or laptop to act as a VT100 terminal for the MX3216 system. 1.
Section 6, User Interface - Logging on to the MX3216 LOGGING ON TO THE MX3216 To log on to the MX3216 system, perform the following steps: 1. Establish the physical connection to the MX3216 system using one of the three options discussed in “System Management” on page 6-1. 2. If a craft port session is being used, proceed to step 3. If using a Telnet session, proceed to step 4. 3. Press ENTER until the logon prompt appears. NOTE The MX3216 system requires the user ID and associated password. 4.
MX3216 System Manual MENU STRUCTURE The MX3216 Controller Card provides a menu system for the entire MX3216 system. All system-related menus are controlled by the Controller Card. This subsection explains the methods used to navigate the MX3216 system menus. NOTE To view the MX3216 system menu trees, refer to “Menu Trees” on page 6-5. The menu structure for the MX3216 system is a layered menu tree. Each layer of the menu tree is displayed as a menu or a screen.
Section 6, User Interface - Menu Navigation MENU NAVIGATION Basic menu navigation is accomplished by selecting the desired option number and then pressing ENTER. To work backward through the menus press the ESC (escape) key. To access the System Help screen, press the question mark (?) key, and press ENTER. Quickly identify the location of each menu and screen in the MX3216 system by referencing the underlined menu title shown on every menu and screen (see Figure 6-2).
MX3216 System Manual 1. Configuration A MX3216 Main Menu 2. Provisioning 3. Quick Setup 4. Status 5. Test 6. System Alarms 7. Firmware Upgrade B C D E F G 8. Module A 9. Module B 10. Logout Figure 6-3.
Section 6, User Interface - Menu Trees CLEI Code A 1. Configuration Part Number Serial Number MAC Address Product Revision Code Version Code Checksum Boot Version Boot Checksum 1. Module A Configuration 2. Module B Configuration 1. C-Bit 1. Tx Framing 2. M23 1. - 2. DS3 A/B Provisioning 1. C-Bit 2. Tx Clock Source 2. M23 1. Disabled 1. DS3 Interfaces 3. Loopback Detection 2. Enabled 4. DS3 Circuit Identifier 1. Near End Facility ID Code 3. - 4. DS3 A/B Equipment Identification 2.
MX3216 System Manual 1. 0-133 H 1. Line Length (feet) 2. 133-266 3. 266-399 1. - 16. DS1 Port 1 - 16 4. 399-533 5. 533-655 1. AMI 2. Line Coding 2. B8ZS 1. Disabled 2. DS1 Port Interfaces 3. Loopback Detection 2. CSU 3. NIU 4. Circuit Identifier 1. Copy FROM DS1 Port 17. Copy Provisioning to Multiple Line Length (feet) Line Coding Loopback Detection 2. First DS1 Port to Copy TO 3. Last DS1 Port to Copy TO 4. Copy Provisioning 1. DS1 Port 1. Choose Group 2. Module A 3. Module B 3.
Section 6, User Interface - Menu Trees 1. Auto I 1. Craft Port Baud Rate 2. Disabled 3. 9600 4. 19200 5. General 5. 38400 6. 57600 7. 115200 Functional Baud Rate 2. Date 3. Time 1. Disabled 4. Auto-Logoff Inactivity Time 2. 1-Min 3. 5-Min 4. 10-Min 5. 15-Min 6. 30-Min 7. 45-Min 8. 60-Min 5. Scheduled Card Reset 6. Card Reset 7. Restore Default Provisioning 1. IP Address 1. Rear Ethernet Interface 2. Subnet Mask 3. Gateway 1. 10 Mbps Half Duplex 4. Provisioned Rate & Duplex 2. 100 Mbps Half Duplex 3.
MX3216 System Manual J 1. SNMP State 1. Disabled 2. SNMP Traps 2. Enabled 7. SNMP 3. - 6. Trap Host 1 - 4 1. Valid 1. Status 2. Under Creation 3. Invalid 7. System ID 8. System Location 9. System Contact 10. Read Community 11. Write Community 8. Save Provisioning 1. Disabled 9. Auto Save 2. Enabled 1. Users Currently Logged On 10. Security Administration 1. Enable/Disable User Account 1. ADMIN 2. Edit User Accounts 2. READONLY 1. READ 2. Access Rights 3. READWRITE 2. TEST 4. TEST 3.
Section 6, User Interface - Menu Trees 1. DS1 Port 1. Choose Group 2. Module A 3. Module B 1. - 16. DS1 Port #1 - 16 4. DS3 A 5. DS3 B C 3. Quick Setup 2. Choose DS1 3. Apply Cross-Connect 17. System ID 18. IP Address 19. Subnet Mask 20. Gateway 21. Date 22. Time 1. DS1 Port 1. Choose Group 2. Module A 3. Module B 23. - 24. Module A #1 - 2 Drops 4. DS3 A 5. DS3 B 2. Choose DS1 3. Apply Cross-Connect 25. Module A Quick Setup Menu 1. Controller Equipment D 4. Status 2. - 3. DS3 A/B 1.
MX3216 System Manual 1. Data Mode 1. - 16. DS1 Port #1 - 16 2. Analog Network 3. Digital Line/Net 4. CSU Loopback E 5. CSU LB w/ Pattern 5. Test 6. NIU Loopback 7. NIU LB w/ Pattern 8. Pattern Test 1. Data Mode 17. - 18. DS3 A/B 2. Line Loopback 3. Digital Loopback 4. Remote Loopback 5. Remote ALL T1 19. - 20. DS1s in DS3 A/B 1. Data Mode 1. - 28. DS1 #1 - 28 in DS3 A/B Test 2. Tributary Loopback 3. Remote Loopback 4. CSU Loopback 5. CSU LB w/ Pattern 6. NIU Loopback 7. NIU LB w/ Pattern 8.
Section 6, User Interface - Menu Trees K 1. Disabled 23. Test Timeout 2. 1 minute 3. 5 minutes 4. 10 minutes 5. 15 minutes 6. 30 minutes 7. 45 minutes 8. 60 minutes 1. QRSS 24. Pattern 2. ALL ONES 3. ALL ZEROS 4. 2 IN 8 (2:6) 5. 1 IN 8 (1:7) 6. 2^15-1 INV Figure 6-6.
MX3216 System Manual 1. Master Log F 6. System Alarms 1. AUX # Input Description 2. Controller A 1. - 4. Aux #1 - 4 Input Controller B 1. Disabled 2. AUX # Input Level 3. Module A 2. Info 4. Module B 3. Alert 4. Minor 1. Environmental Alarms 5. User-Definable Alarms 5. Major 6. Critical 7. ACO 5. - 6. PWR Bus A/B Input 1. Disabled 1. PWR A/B FAIL Level 2. Info 3. Alert 4. Minor 5. Major 6. Critical 2. - 3. Module A/B Removed Level 1. Disabled 4. Stand-by Controller Removed Level 2. Info 3.
Section 6, User Interface - Menu Trees 1. Configuration A MX3RMM Main Menu 2. Provisioning 3. Quick Setup B C 4. Status 5. Test D Figure 6-8.
MX3216 System Manual Unit Name A 1. Configuration CLEI Code Part Number Serial Number Product Revision Firmware Version Boot Version 1. Network Interface A 1. Primary Timing Mode 1. Internal 2. Network Interface B 2. Secondary Timing Mode 2. Line 1. Network 3. Through 1. Enabled 3. Interface State B 2. Disabled 2. Provisioning 1. ESF 3. Framing 2. SF 4. Timeslot Assignment 1. Enabled 2. Terminal Server 1. Terminal State 1. - 4. Port 1 - 4 2. Disabled 1. 9600 2. Baud Rate 2. 19200 3. 38400 4.
Section 6, User Interface - Menu Trees 1. Enabled E 1. Ethernet State 2. Disabled 3. Ethernet Interface 1. Auto 2. Link Speed & Duplex 2. 10 Mbps, Half Duplex 3. 10 Mbps, Full Duplex 4. 100 Mbps, Half Duplex 5. 100 Mbps, Full Duplex Functional Link Speed & Duplex 1. Auto 3. Cross-over Mode 2. MDI 3. MDI-X Link Status 4. Save Provisioning 1. Enabled 5. Auto Save 2. Disabled 6. Restore Saved Provisioning 7. Restore Factory Defaults 8. Card Reset 1. Timeslot Assignment C 3. Quick Setup 1. Enabled 3.
MX3216 System Manual D 1. DS1 A Testing 1. None 2. DS1 B Testing 2. Line 5. Test 3. Payload 1. 120 Minutes 3. Loopback TImeout 2. 90 Minutes 3. 60 Minutes 4. 30 Minutes 5. 15 Minutes 6. Disabled Figure 6-10.
Section 6, User Interface - Menu Descriptions MENU DESCRIPTIONS This section describes the individual menus and screens of the MX3216 system as follows: • “MX3216 Main Menu” on page 6-19 • “MX3RMM Main Menu” on page 6-102 NOTE For basic provisioning, refer to the “Quick Setup Menu” on page 657. For more detailed provisioning, refer to the “Provisioning Menu” on page 6-23. MX3216 Main Menu The MX3216 Main menu (see Figure 6-11) is the access point to all other operations.
MX3216 System Manual Table 6-2. MX3216 Main Menu Options Option Description Function 1 Configuration This option displays the “Configuration Screen” on page 6-21. The Configuration screen provides inventory information such as the CLEI, part number, serial number, and revisions. 2 Provisioning This option displays the “Provisioning Menu” on page 6-23. The Provisioning menu provides all userconfigurable options. 3 Quick Setup This option displays the “Quick Setup Menu” on page 6-57.
Section 6, User Interface - Menu Descriptions Configuration Screen The Configuration screen (see Figure 6-12) displays information about the MX3216 system. Information such as Code Version changes as upgrades are performed. The CLEI Code and Part Number can be used to search for related information on the ADTRAN web site or to order additional parts. Some information from this menu may be required when calling the ADTRAN Technical Support.
MX3216 System Manual Table 6-3. Configuration Screen Fields (Continued) Field Description Code Checksum This field displays the checksum of the current application firmware revision level of the MX3216. Boot Version This field displays the boot firmware revision code. Boot Checksum This field displays the checksum of the boot firmware revision code. The Configuration screen options are shown in Table 6-4. Table 6-4.
Section 6, User Interface - Menu Descriptions Provisioning Menu The Provisioning menu (see Figure 6-13) provides options to define all user configurable settings.
MX3216 System Manual Table 6-5. Provisioning Menu Options (Continued) Option 6-24 Description Function 6 Network Management This option displays the “Network Management Menu” on page 6-43. The Network Management menu provides system-level IP provisioning options, as well as options specific to the rear Ethernet jack. 7 SNMP This option displays the “SNMP Menu” on page 647. The SNMP menu provides provisioning options for the SNMP.
Section 6, User Interface - Menu Descriptions DS3 Menu The DS3 menu (see Figure 6-14) provides provisioning options for the DS3 interfaces.
MX3216 System Manual DS3 Provisioning Menu The DS3 Provisioning menu (see Figure 6-15) provides options to provision the Tx framing, Tx clock source, loopback detection, and DS3 circuit identifier for DS3 A and B.
Section 6, User Interface - Menu Descriptions Table 6-7. DS3 Provisioning Menu Options (Continued) Option 3 Description Function Loopback Detection This option is used to disable or enable the FEAC and CBIT loopbacks. Options are as follows: • Disabled • Enabled 4 DS3 Circuit Identifier 61189008L1-1B This option is used to enter a DS3 circuit identifier. The circuit ID is a user-configurable text string field used to name the individual ports.
MX3216 System Manual Equipment Identification Menu The Equipment Identification menu (see Figure 6-16) is used to enter ID codes for the near and far end facility, location, frame, unit, and equipment. These fields provide user-configurable text strings to identify the MX3216 system over the network.
Section 6, User Interface - Menu Descriptions Table 6-8. Equipment Identification Menu Options (Continued) Option Description Function 3 Near End Frame ID Code This option is used to enter a near end frame ID code. When using C-bit framing, this is transmitted in the DS3 overhead to the next device. The code is a user-configurable text string. This field accepts up to 10 alphanumeric characters, including spaces and special characters.
MX3216 System Manual DS1s in DS3 Menu The DS1s in DS3 menu (see Figure 6-17) is used to enter circuit identifiers for the 28 DS1 tributaries in DS3 A and B.
Section 6, User Interface - Menu Descriptions DS1 Port Menu The DS1 Port menu (see Figure 6-18) is used to provision line length, line coding, loopback detection, and circuit ID. NOTE Save time by using the Copy Provisioning to Multiple option. Configure one DS1 to the necessary settings, then copy that information to other DS1s with the same provisioning.
MX3216 System Manual DS1 Port 1–16 Menu The DS1 Port 1–16 menu (see Figure 6-19) is used to provision the line length, line coding, loopback detection, and circuit identifier for the DS1 ports.
Section 6, User Interface - Menu Descriptions Table 6-11. DS1 Port 1–16 Menu Options (Continued) Option 3 Description Function Loopback Detection This option is used to select the loopback detect state. Options are as follows: • Disabled • CSU • NIU 4 Circuit Identifier 61189008L1-1B This option is used to enter a circuit identifier. The circuit ID is a user-configurable text string field used to name the individual ports.
MX3216 System Manual Copy Provisioning to Multiple DS1 Ports Menu The Copy Provisioning to Multiple DS1 Ports menu (see Figure 6-20) provides a quick way to provision multiple ports at once.
Section 6, User Interface - Menu Descriptions Cross-Connect Menu The Cross-Connect menu (see Figure 6-21) allows provisioning of the 3-to-1 cross-connect. The Cross-Connect menu displays the cross-connect assignment, if any, for each tributary DS1. Establish connections between the DS3s, rear panel DSX-1 drops, and module card DS1s as shown in Figure 3-1 on page 3-2. With some restrictions, any DS1 can be connected to any other DS1.
MX3216 System Manual The Cross-Connect menu hot keys are shown in Table 6-14. Table 6-14. Cross-Connect Menu Hot Keys Hot Keys Description Function T Toggle View This hot key is used to toggle through the DS3 A view, DS3 B view, and Drops view (see Figure 622). V View Map This hot key is used to display the “View Map Menu” on page 6-39. The Drops view of the Cross-Connect menu is shown in Figure 6-22.
Section 6, User Interface - Menu Descriptions Table 6-15. Drops View Options Option 1–16 Description Function DS1 1–16 If currently mapped, this option displays the Confirm Unmap/Map screen that provides a yes/no option to unmap the selected cross-connect. If currently unmapped, this option displays the “Cross-Connect Change Menu” on page 6-38. 17–20 Module A 1–4 These options appear for the DS1 ports used by a module installed in slot A.
MX3216 System Manual Cross-Connect Change Menu The Cross-Connect Change menu (see Figure 6-23) is used to map connections for unmapped DS1s. Card: Controller A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 MX3216->Provisioning->Cross-Connect->Change CONNECT DS3 A T1 #1 TO 1 - Choose Group : (DS3 A ... ) 2 - Choose DS1 : Selection : '?' - System Help Screen Figure 6-23. Cross-Connect Change Menu The Cross-Connect Change menu options are shown in Table 6-16.
Section 6, User Interface - Menu Descriptions View Map Menu The View Map menu (see Figure 6-24) provides a view of the cross-connect on one screen and allows connection mapping.
MX3216 System Manual Equipment Protection Menu The Equipment Protection menu (see Figure 6-25) is used to perform a manual switch from the active card to the standby card. CAUTION Performing a manual switch briefly interrupts customer data.
Section 6, User Interface - Menu Descriptions General Provisioning Menu The General Provisioning menu (see Figure 6-26) is used to provision the craft port baud rate, the date, time, auto-logoff inactivity time, to reset the MX3216, and to restore default settings. CAUTION If the baud rate is changed, the rate changes immediately, and the terminal emulation software must be updated to reflect the change.
MX3216 System Manual Table 6-19. General Provisioning Menu Options Option 1 Description Function Craft Port Baud Rate This option is used to select the craft port baud rate. Options are as follows: • Auto: This option allows the craft port baud rate to be set automatically. While in this mode, press ENTER until the logon prompt appears when logging on. • Disabled: This option disables the local craft port interface. This allows a Telnet session to disable the craft port.
Section 6, User Interface - Menu Descriptions Network Management Menu The Network Management menu (see Figure 6-27) is used to provision Ethernet information. Card: Controller A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 MX3216->Provisioning->Network Management 1 - Rear Ethernet Interface 2 - Network Service Ports 3 - TFTP Server : 0.0.0.0 Selection : '?' - System Help Scree Figure 6-27.
MX3216 System Manual Rear Ethernet Interface Menu The Rear Ethernet Interface menu (see Figure 6-28) is used to provision the IP address, subnet mask, gateway, provisioned data rate, and cross-over mode for the rear Ethernet interface. CAUTION Changing IP settings terminates all active Telnet sessions.
Section 6, User Interface - Menu Descriptions Table 6-21. Rear Ethernet Interface Menu Options Option Description Function 1 IP Address This option is used to enter the IP address. The IP address is written in the format XXX.XXX.XXX.XXX, where each 3-digit field has a value between 000 and 255. 2 Subnet Mask This option is used to enter the subnet mask. A subnet mask is used to reduce the traffic on each subnetwork by confining traffic to only the subnetwork for which it was intended.
MX3216 System Manual Network Service Ports Menu The Network Service Ports menu (see Figure 6-29) provides the option to enter a secondary port number. Card: Controller A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 MX3216->Provisioning->Network Management->Network Service Ports 1 - Secondary Telnet Port Selection : : 2002 '?' - System Help Scree Figure 6-29. Network Service Ports Menu The Network Service Ports menu options are shown in Table 6-22. Table 6-22.
Section 6, User Interface - Menu Descriptions SNMP Menu The Simple Network Management Protocol (SNMP) menu (see Figure 6-30) is used to provision trap hosts, contact information, and community names.
MX3216 System Manual Table 6-23. SNMP Menu Options (Continued) Option 6-48 Description Function 8 System Location This option provides a user-configurable text string for the location of the MX3216. This field is used to identify the physical location of the unit. Up to 55alphanumeric characters can be entered in this field, including spaces and special characters (such as an underscore). 9 System Contact This option provides a user-configurable text string for a SNMP contact name.
Section 6, User Interface - Menu Descriptions Trap Host Menu The Trap Host menu (see Figure 6-31) is used to set the status for each trap host. Card: Controller A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 MX3216->Provisioning->SNMP->Trap Host 1 1 - Status : Invalid Selection : '?' - System Help Screen Figure 6-31. Trap Host Menu The Trap Host menu options are shown in Table 6-24. Table 6-24.
MX3216 System Manual Auto Save Menu The Auto Save menu (see Figure 6-32) provides the option to save provisioning settings each minute if enabled. Card: Controller A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 Auto Save : Enabled 1 - Disabled 2 - Enabled Will Save Provisioning Each Minute If Enabled Selection : '?' - System Help Screen Figure 6-32. Auto Save Menu The Auto Save menu options are shown in Table 6-25. Table 6-25.
Section 6, User Interface - Menu Descriptions Security Administration Menu The Security Administration menu (see Figure 6-33) provides access to user accounts. Card: Controller A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 MX3216->Provisioning->Security Administration 1 2 3 4 - Users Currently Logged On Edit User Accounts Access Tech Support Account Restore Default Security Settings Selection : '?' - System Help Screen Figure 6-33.
MX3216 System Manual Users Currently Logged On Screen The Users Currently Logged On screen (see Figure 6-34) displays all users currently logged in to the MX3216 system. Card: Controller A ADTRAN MX3216 System Unacknowledged Alarms: NONE Users Currently Logged On USER ACCESS ADMIN IP 1 TYPE Menu ID: FROM 172.22.117.239 MM/DD/YY hh:mm Site 1 MX3216 TIME 10/17/00 01:56:11 '?' - System Help Screen Figure 6-34.
Section 6, User Interface - Menu Descriptions Edit Accounts Menu The Edit Accounts menu (see Figure 6-35) allows access to manage all user accounts. Card: Controller A ADTRAN MX3216 System Unacknowledged Alarms: NONE Num 1. 2. 3. 4.
MX3216 System Manual Table 6-30 provides the default account names and passwords for the MX3216 system. Table 6-30. Edit User Accounts Menu Options Account Level Account Name Account Password READ ONLY READONLY PASSWORD READ/WRITE READWRITE PASSWORD TEST TEST PASSWORD ADMIN ADMIN PASSWORD TECH SUPPORT* Challenge Key Response Key * The Tech Support Account Level is established and accessed as directed by ADTRAN Technical Support during troubleshooting and analysis.
Section 6, User Interface - Menu Descriptions Edit Menu The Edit menu (see Figure 6-36) is used to edit or delete user accounts. Card: Controller A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 MX3216->Provisioning->Security Administration->Edit Accounts->Edit User: ADMIN 1 2 3 4 - Enable/Disable User Account Access Rights Change Password Delete User : ENABLED : ADMIN Selection : '?' - System Help Screen Figure 6-36.
MX3216 System Manual Access Tech Support Account Screen The Access Tech Support Account screen (see Figure 6-37) provides access to a technical support account.
Section 6, User Interface - Menu Descriptions Quick Setup Menu To simplify the installation process, all of the basic configuration options necessary to get the MX3216 running are grouped together on the Quick Setup menu (see Figure 6-38). The Quick Setup menu allows configuration of such items as application mode and Ethernet client ports, as well as system date, time, and IP address information. WARNING Changing IP settings terminates all active Telnet sessions.
MX3216 System Manual Table 6-32. Quick Setup Menu Options (Continued) Option Description Function 19 Subnet Mask This option is used to enter the subnet mask. A subnet mask is used to reduce the traffic on each subnetwork by confining traffic to only the subnetwork for which it was intended. A subnet mask makes the entire network more manageable.
Section 6, User Interface - Menu Descriptions Change Menu The Change menu (see Figure 6-39) is used to map connections for unmapped DS1s. Card: Controller A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 MX3216->Quick Setup->Change CONNECT DS1 PORT #1 TO 1 - Choose Group : (DS3 A ... ) 2 - Choose DS1 : Selection : '?' - System Help Screen Figure 6-39. Change Menu The Change menu options are shown in Table 6-33. Table 6-33.
MX3216 System Manual Status Menu The Status menu (see Figure 6-40) presents a condensed version of the system status for the MX3216. More detailed information is available through the options.
Section 6, User Interface - Menu Descriptions Table 6-34. Status Menu Options (Continued) Option Description Function 6 Module A This option displays the “Status Screen” on page 6117. The Status screen displays the status information for module A. Figure 6-40 shows the MX3RMM installed as module A. 7 Module B If module B is installed, this option displays the status screen for the card installed in slot B. Fan Module This field displays the status for the fan module.
MX3216 System Manual Controller Equipment Screen The Controller Equipment screen (see Figure 6-41) displays the status of the active card, standby card, and alarms. Card: Controller A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 MX3216->Status->Controller Equipment Active (Card A) Standby (Card B) : Normal : Not Installed Alarms : None '?' - System Help Screen Figure 6-41.
Section 6, User Interface - Menu Descriptions Table 6-37. Standby Card Status Status Description Ready This state indicates a card is ready and acting as a backup module. Not Installed This state indicates a card is not installed in the designated slot. Software Update This state indicates a software update is in progress. Not Ready This state indicates a card configuration is in progress. Not Ready - Code Mismatch This state indicates an active card should be reset to run new code.
MX3216 System Manual DS3 Status Menu The DS3 Status menu (see Figure 6-42) displays the status for DS3 A and B.
Section 6, User Interface - Menu Descriptions Table 6-39. DS3 Status Menu Fields (Continued) Field Description Tx Clock Source This field displays the network clock source. Types are as follows: • Loop • Local Tx Framing This field displays the network framing type. Types are as follows: • C-bit • M23 Test Status This field displays the current test status of the network.
MX3216 System Manual Table 6-41. Remote System Conditions Condition Description Normal Indicates the far end MX3216 system is not reporting any conditions. DS3 RAI Indicates the far end unit is receiving a Remote Alarm Indication (RAI) (yellow) alarm from the network. This alarm is a signal sent back toward the source of a failed transmit circuit. The X-bits (X1 and X2) are set to zero. DS3 LOS Indicates the far end unit has lost the Rx signal.
Section 6, User Interface - Menu Descriptions Table 6-42. DS2 Conditions Condition Description OK Indicates the DS2 is not receiving alarms. OOF Indicates the unit detects a framing loss across the DS2. RAI Indicates the unit is receiving a RAI (yellow) alarm from the network across a DS2. This alarm is a signal sent back toward the source of a failed transmit circuit. The X-bit is set to zero. AIS Indicates the unit is receiving an AIS (blue) alarm condition from the network across the DS2.
MX3216 System Manual DS1 Ports Screen The DS1 Ports screen (see Figure 6-43) displays the status of the DS1 ports.
Section 6, User Interface - Menu Descriptions Table 6-45. DSX-1 Port Tests Test Description No Test This state indicates no tests are active. Analog Network This test loops towards the 3-to-1 cross connect and includes the analog portion of the AFE. Digital Line/Net This test loops towards the DSX-1 line and includes the digital portion of the AFE. Additionally, a loop is established towards the DS3 after the M12 block. CSU Loopback This test sends CSU loop up commands towards the DSX-1 line.
MX3216 System Manual Environmental Alarms Screen The Environmental Alarms screen (see Figure 6-44) displays the status of the auxiliary inputs, power feeds, and ACO inputs.
Section 6, User Interface - Menu Descriptions Table 6-47. Environmental Alarm External Inputs External Input Description AUX #1 Input This input indicates open or closed relay contacts for AUX #1. AUX #2 Input This input indicates open or closed relay contacts for AUX #2. AUX #3 Input This input indicates open or closed relay contacts for AUX #3. AUX #4 Input This input indicates open or closed relay contacts for AUX #4.
MX3216 System Manual Test Menu The Test menu (see Figure 6-45) provides options for testing the DS1 ports.
Section 6, User Interface - Menu Descriptions Table 6-48. Test Menu Options (Continued) Option 23 Description Function Test Timeout This option is used to select the test timeout. Options are as follows: • Disabled • 1 minute • 5 minutes • 10 minutes • 15 minutes • 30 minutes • 45 minutes • 60 minutes 24 Pattern This option is used to select the test pattern used by the internal BERT.
MX3216 System Manual DS1 Port Test Menu The DS1 Port Test menu (see Figure 6-46) provides testing options that can be run on the DS1 ports. CAUTION Enabling a test interrupts customer payload on the selected DS1 port.
Section 6, User Interface - Menu Descriptions Table 6-49. DS1 Port Test Menu Options (Continued) Option Description Function 5 CSU LB w/ Pattern This test sends CSU loop up commands towards the DSX-1 line and sends a test pattern using the internal BERT. 6 NIU Loopback This test sends NIU loop up commands towards the DSX-1 line. 7 NIU LB w/ Pattern This test sends NIU loop up commands towards the DSX-1 line and sends a test pattern using the internal BERT.
MX3216 System Manual DS3 Test Menu The DS3 Test menu (see Figure 6-47) provides testing options that can be run on DS3 A and B. CAUTION Enabling a test on a DS3 interrupts customer payload on all DS1s transported over the selected DS3. Card: Controller A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 DS3 A Test : Data Mode 1 2 3 4 5 - Data Mode Line Loopback Digital Loopback Remote Loopback Remote ALL T1 Selection : '?' - System Help Screen Figure 6-47.
Section 6, User Interface - Menu Descriptions Table 6-50. DS3 Test Menu Options (Continued) Option Description Function 3 Digital Loopback This test loops towards the 3/1 cross-connect and includes the DS3 framer. 4 Remote Loopback (C-Bit Only) This test performs a line loopback at the equipment on the other end of the selected DS3. 5 Remote ALL T1 (C-Bit Only) This test performs a tributary loopback on all DS1s in the DS3 at the equipment on the other end of the selected DS3.
MX3216 System Manual DS1s in DS3 Menu The DS1s in DS3 menu (see Figure 6-48) displays the test that is selected for each of the tributaries.
Section 6, User Interface - Menu Descriptions DS1 in DS3 Test Menu The DS1 in DS3 Test menu (see Figure 6-49) provides testing options that can be run on the tributaries. Card: Controller A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 DS1 #1 in DS3 A Test : Data Mode 1 2 3 4 5 6 7 8 - Data Mode Tributary Loopback Remote Loopback CSU Loopback CSU LB w/ Pattern NIU Loopback NIU LB w/ Pattern Pattern Test Selection : '?' - System Help Screen Figure 6-49.
MX3216 System Manual Table 6-52. DS1 in DS3 Test Menu Options (Continued) Option 6-80 Description Function 6 NIU Loopback This test sends NIU loop up commands towards the DSX-1 line. 7 NIU LB w/ Pattern This test sends NIU loop up commands towards the DSX-1 line and sends a test pattern using the internal BERT. 8 Pattern Test This test sends a test pattern using the internal BERT.
Section 6, User Interface - Menu Descriptions Test Alarm Relays Menu The Test Alarm Relays menu with the Alarm Relay Test Status option set to Inactive is shown in Figure 6-50. Figure 6-51 shows the Test Alarm Relays menu with the Alarm Relay Test Status option set to Active. Card: Controller A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 MX3216->Test->Test Alarm Relays 1 - Alarm Relay Test Status Selection : : Inactive '?' - System Help Screen Figure 6-50.
MX3216 System Manual The Test Alarm Relays menu fields are shown in Table 6-53. Table 6-53. Test Alarm Relays Menu Fields Option 1 Field Description Alarm Relay Test Status This option is used to select the alarm relay test status. Options are as follows: • Inactive • Active: Options 2–5 are visible when this option is selected. 6-82 2 Toggle Critical Relay This option is a toggle key to change between Inactive and Active status.
Section 6, User Interface - Menu Descriptions System Alarms Menu The System Alarms menu (see Figure 6-52) provides options for viewing all alarms affecting MX3216 system operations. Alarms can be viewed within the Master Log screen. The Environmental Alarms menu contains user-provisionable options. The Alarm Chronology menu offers the viewing of alarms in either ascending or descending order.
MX3216 System Manual Table 6-54. System Alarms Menu Options (Continued) Option Description Function 5 User-Definable Alarms This option displays the “User-Definable Alarms Menu” on page 6-92. This menu displays environmental and card removed alarms which have user-definable severity levels. 6 Alarm Chronology This option is used to select the alarm chronology.
Section 6, User Interface - Menu Descriptions Master Alarms Log Screen The Master Alarms Log screen (see Figure 6-53) is used to review and acknowledge all system alarms.
MX3216 System Manual Table 6-55. Master Alarms Log Screen Fields (Continued) Field Description Level This field displays the severity level of the alarm. Possible states are as follows: • Info • Alert • Minor • Major • Critical Description This field displays a brief description of the alarm. Status This field displays the status of the alarm. Possible states are as follows: • Active • Clear • Event An asterisk (*) is displayed beside the status if the alarm is unacknowledged.
Section 6, User Interface - Menu Descriptions Controller Alarms Log Screen The Controller Alarms Log screen (see Figure 6-54) is used to review and acknowledge controller card alarms.
MX3216 System Manual Table 6-57. Controller Alarms Log Screen Fields (Continued) Field Description Level This field displays the severity level of the alarm. Possible states are as follows: • Info • Alert • Minor • Major • Critical Description This field displays a brief description of the alarm. Status This field displays the status of the alarm. Possible states are as follows: • Active • Clear • Event An asterisk (*) is displayed beside the status if the alarm is unacknowledged.
Section 6, User Interface - Menu Descriptions Module A/B Alarms Log Screen The Module A/B Alarms Log screen (see Figure 6-55) is used to review and acknowledge alarms.
MX3216 System Manual Table 6-59. Module A/B Alarms Log Screen Fields Field Description Level This field displays the severity level of the alarm. Possible states are as follows: • Info • Alert • Minor • Major • Critical Description This field displays a brief description of the alarm. Status This field displays the status of the alarm. Possible states are as follows: • Active • Clear • Event An asterisk (*) is displayed beside the status if the alarm is unacknowledged.
Section 6, User Interface - Menu Descriptions The Module A/B Alarms Log hot keys are shown in Table 6-60. Table 6-60. Module A/B Alarms Log Hot Keys Hot Keys Description Function N Next This hot key is used to display the next page of alarms. P Previous This hot key is used to display the previous page of alarms. F First This hot key is used to display the first page of alarms. L Last This hot key is used to display the last page of alarms.
MX3216 System Manual User-Definable Alarms Menu The User-Definable Alarms menu (see Figure 6-56) allows access to environmental, module A, module B, and stand-by controller alarms.
Section 6, User Interface - Menu Descriptions Table 6-61. User-Definable Alarms Menu Options Option 1 2–3 Description Function Environmental Alarms This option displays the “Environmental Alarms Menu” on page 6-94. This menu displays the environmental alarms including auxiliary input and power bus related alarms. Module A–B Removed Level This option displays the types of alarms that can be generated if the card in slot A/B is removed.
MX3216 System Manual Environmental Alarms Menu The Environmental Alarms menu (see Figure 6-57) provides access to the auxiliary input and power feed alarms.
Section 6, User Interface - Menu Descriptions Auxiliary Menu The Auxiliary menu (see Figure 6-58) is used to input the description of the selected auxiliary input and set the alarm severity level. Card: Controller A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 MX3216->System Alarms->User-Definable Alarms->Environmental Alarms->Aux 1 - AUX #1 Input Description : AUX #1 INPUT 2 - AUX #1 Input Level : Major Selection : '?' - System Help Screen Figure 6-58.
MX3216 System Manual Power Menu The Power menu (see Figure 6-59) is used to set the alarm severity level for the selected power bus input. Card: Controller A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 MX3216->System Alarms->User-Definable Alarms->Environmental Alarms->Power 1 - PWR A FAIL Level : Major Selection : '?' - System Help Screen Figure 6-59. Power Menu The Power menu options are shown in Table 6-64. Table 6-64.
Section 6, User Interface - Menu Descriptions Firmware Upgrade Menu The Firmware Upgrade menu (see Figure 6-60) provides access to upgrade the firmware for both controllers and both expansion modules. Card: Controller A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 MX3216->Firmware Upgrade C MX3216........ - A [A01] .............. - B [] A MX3RMM........ .............. Selection : [A03.SNMP4] [] '?' - System Help Screen Figure 6-60.
MX3216 System Manual Method Menu The Method menu (see Figure 6-61) provides options for upgrading the firmware. CAUTION Resetting the active controller disrupts traffic and cause a switch to the standby card if it is installed.
Section 6, User Interface - Menu Descriptions Table 6-67. Method Menu Fields Field Description Controller A–B status This field displays the progress of the TFTP download for the controller. Progress messages are as follows: • Ready for transfer • Not available • Transfer in progress TFTP Menu The TFTP menu (see Figure 6-62) is used to transfer the new firmware by TFTP.
MX3216 System Manual TFTP Update Status Screen The TFTP Update Status screen (see Figure 6-63) displays the status of the TFTP connection. Card: Controller A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 MX3216->Firmware Upgrade->Method->TFTP Update->Status TFTP Server Remote Filename TFTP Status : 0.0.0.
Section 6, User Interface - Menu Descriptions Table 6-70. TFTP Download Progress Messages Progress Message Description Contacting Server This message indicates that an attempt to establish communication with the TFTP network server specified by the server address in the TFTP Server IP Address field is in progress. Timed Out This message indicates that communication with the TFTP network server has been lost.
MX3216 System Manual MX3RMM Main Menu The MX3RMM Main menu (see Figure 6-64) is the main access point to all MX3RMM functions. NOTE For basic provisioning, refer to the “Quick Setup Menu” on page 6115. For more detailed provisioning, refer to the “Provisioning Menu” on page 6-105. Card: Module A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 MX3RMM 1 2 3 4 5 - Configuration Provisioning Quick Setup Status Test Selection : '?' - System Help Screen Figure 6-64.
Section 6, User Interface - Menu Descriptions Table 6-72. MX3RMM Main Menu Options (Continued) Option Description Function 3 Quick Setup This option displays the “Quick Setup Menu” on page 6-115. The Quick Setup menu provides the most common provisioning options required to configure the MX3RMM. 4 Status This option displays the “Status Screen” on page 6117. The Status screen displays the current status of the MX3RMM. 5 Test This option displays the “Test Menu” on page 6-120.
MX3216 System Manual Configuration Screen The Configuration screen (see Figure 6-65) displays information about the MX3RMM. Information, such as Firmware Version, changes as upgrades are performed. The CLEI Code and Part Number can be used to search for related information on the ADTRAN web site or to order additional parts. Some information from this menu can be required when calling the ADTRAN Technical Support.
Section 6, User Interface - Menu Descriptions Provisioning Menu The Provisioning menu (see Figure 6-66) provides access to all provisioning options for the MX3RMM. NOTE The MX3RMM uses the system level IP address, subnet, and gateway settings from the MX3216. These can be configured from the “Provisioning Menu” on page 6-23 or “Quick Setup Menu” on page 6-57. CAUTION Restoring provisioning settings or resetting this card can disrupt service.
MX3216 System Manual Table 6-74. Provisioning Menu Options Option Description Function 1 Network This option displays the “Network Menu” on page 6107. The Network menu provides provisioning options for the DS1 network interfaces of the MX3RMM. 2 Terminal Server This option displays the “Terminal Server Menu” on page 6-110. The Terminal Server menu is used to provision the four front panel RS-232 terminal server ports. Each port is independently provisioned.
Section 6, User Interface - Menu Descriptions Network Menu The Network menu (see Figure 6-67) is used to configure the DS1 interface A and B. Card: Module A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 Network 1 2 3 4 - Network Interface A Network Interface B Framing Mode Timeslot Assignment Selection : : 01-24 '?' - System Help Screen Figure 6-67. Network Menu The Network menu options are shown in Table 6-75. Table 6-75.
MX3216 System Manual Network Interface Menu The Network Interface menu (see Figure 6-68) is used to set the timing and state for network interface A and B. NOTE In order to use a network interface, a DS1 must be mapped from the controller through the 3/1 cross-connect to the appropriate module slot and DS1. Refer to the “Provisioning Menu” on page 6105 or “Quick Setup Menu” on page 6-115 for more details.
Section 6, User Interface - Menu Descriptions Table 6-76. Network Interface Menu Options Option 1 Description Function Primary Timing Mode This option sets the primary timing mode. Options are as follows: • Internal • Line • Through 2 Secondary Timing Mode This option sets the secondary timing mode that is to be used in the event of a failure of the primary timing mode. Options are as follows: • Internal • Line • Through 3 Interface State This option is used to enable or disable the DS1.
MX3216 System Manual Terminal Server Menu The Terminal Server menu (see Figure 6-69) is used to select the port to provision. Card: Module A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 Terminal Server 1 2 3 4 - Port Port Port Port 1 2 3 4 Selection : '?' - System Help Screen Figure 6-69. Terminal Server Menu The Terminal Server menu options are shown in Table 6-77. Table 6-77.
Section 6, User Interface - Menu Descriptions Terminal Server Port Provisioning Menu The Terminal Server Port Provisioning menu (see Figure 6-70) is used to provision the selected terminal server port.
MX3216 System Manual Table 6-78. Terminal Server Port Provisioning Menu Options (Continued) Option Description Function 4 Telnet Port Number This option is used to enter the Telnet port number associated with the selected terminal server port. 5 Security This option is used to enable or disable password protection on the selected terminal server port. Options are as follows: • Enabled • Disabled 6 Username This option is used to enter a username if security is enabled.
Section 6, User Interface - Menu Descriptions Ethernet Interface Menu The Ethernet Interface menu (see Figure 6-71) is used to set the Ethernet state, link speed and duplex, and cross-over mode for the Ethernet connection on the MX3RMM. NOTE The MX3RMM bridges traffic to the rear panel Ethernet jack on the MX3 chassis. To configure that interface, refer to the “Rear Ethernet Interface Menu” on page 6-44.
MX3216 System Manual Table 6-79. Ethernet Interface Menu Options Option 1 Description Function Ethernet State This option is used to enable or disable the front panel Ethernet jack. Options are as follows: • Enabled • Disabled 2 Link Speed & Duplex This option is used to set the link speed and duplex. Options are as follows: • Auto. This option allows auto negotiation of the Ethernet line speed and duplex.
Section 6, User Interface - Menu Descriptions Quick Setup Menu The Quick Setup menu (see Figure 6-72) provides all of the basic configuration options necessary to get the MX3RMM running.
MX3216 System Manual Table 6-80. Quick Setup Menu Options (Continued) Option 5 Description Function Secondary Timing Mode This option sets the secondary timing mode that is used in the event of a failure of the primary timing mode. Options are as follows: • Internal • Line • Through 6 State This option is used to enable or disable the DS1 for network interface B. Options are as follows: • Enabled • Disabled 7 Primary Timing Mode This option sets the primary timing mode for network interface B.
Section 6, User Interface - Menu Descriptions Status Screen The Status screen (see Figure 6-73) displays the status of the DS1 interfaces and the Ethernet connection.
MX3216 System Manual Table 6-81. Status Screen Fields (Continued) Field Description Loopback This field displays the state of any loopback tests. Table 6-83 on page 6-119 describes the possible loopback test states. TDM This field displays the status of the HDLC link on the DS1. Possible states are as follows: • Up • Down: This state can indicate a problem with the DS1 or with the DS0 assignment. • In Loopback PPP This field displays the state of the PPP link.
Section 6, User Interface - Menu Descriptions Table 6-82 describes the current DS1 line states that are possible. Table 6-82. Line Status Descriptions State Description LOS This state indicates the DS1 is in loss of signal. LOF This state indicates the DS1 is in loss of frame. RX AIS This state indicates the DS1 is receiving AIS. TX AIS This state indicates the DS1 is transmitting AIS. RX RAI This state indicates the DS1 is receiving RAI.
MX3216 System Manual Test Menu The Test menu (see Figure 6-74) provides testing options for the DS1 interfaces. Card: Module A ADTRAN MX3216 System Unacknowledged Alarms: NONE ID: MM/DD/YY hh:mm Site 1 MX3216 DS1 X Testing 1 - DS1 A Testing 2 - DS1 B Testing 3 - Loopback Timeout Selection : : None : None : 120 Minutes '?' - System Help Screen Figure 6-74. Test Menu The Test menu options are shown in Table 6-84.
Section 6, User Interface - Menu Descriptions Table 6-84. Test Menu Options Option 1 Description Function DS1 A Testing This option selects the loopback for the DS1 A interface. Options are as follows: • None • Line • Payload 2 DS1 B Testing This option selects the loopback for the DS1 B interface. Options are as follows: • None • Line • Payload 3 Loopback Timeout This option sets the amount of time any given loopback is maintained before automatically being disabled.
MX3216 System Manual This page is intentionally blank.
Section 7 Maintenance INTRODUCTION The MX3216 does not require routine maintenance for normal operation. Do not attempt to make repairs in the field. Repair services can be obtained by returning the defective unit to ADTRAN. For warranty information, refer to “Appendix A, Warranty”.
MX3216 System Manual This page is intentionally blank.
Appendix A Warranty WARRANTY AND CUSTOMER SERVICE ADTRAN will replace or repair this product within the warranty period if it does not meet its published specifications or fails while in service. Warranty information can be found at www.adtran.com/warranty. Refer to the following subsections for sales, support, Customer and Product Service (CAPS) requests, or further information.
® Carrier Networks Division 901 Explorer Blvd.