Specifications

ManualsBrandsADTRAN ManualsComputer equipmentMX3216

Section 3, Application Guidelines - MX3RMM Data Path Block Diagram

61189008L1-1B 3-13

Figure 3-13 through Figure 3-15 show an example of setting up a remote management appli-

cation. Figure 3-13 shows the Quick Setup menu before any IP settings have been estab-

lished. It also shows a possible cross-connect mapping where several DS1s are dropped.

Figure 3-13. Quick Setup Menu Showing Default IP Settings

Figure 3-14 shows the same menu after the IP settings have been established. The IP address

is 10.200.2.215, the subnet mask is 255.255.0.0, and gateway is 10.200.254.254. These

settings should be available from the network administrator.

Figure 3-14. Quick Setup Menu Showing Example IP Settings

Card: Controller A ADTRAN MX3216 System MM/DD/YY hh:mm

Unacknowledged Alarms: None ID: Site 1 MX3216

MX3216->Quick Setup

DS1 Ports Module Drops (None Installed)

1 - # 1 : DS3 A T1 #12 9 - # 9 : MX3RMM (Module A)

2 - # 2 : DS3 A T1 #13 10 - #10 : 23 - MA1 -

3 - # 3 : DS3 A T1 #14 11 - #11 : 24 - MA2 -

4 - # 4 : DS3 A T1 #15 12 - #12 : 25 - MA3 -

5 - # 5 : 13 - #13 : 26 - MA4 -

6 - # 6 : 14 - #14 :

7 - # 7 : 15 - #15 :

8 - # 8 : 16 - #16 :

System

17 - System ID : Site 1 MX3216

18 - IP Address : 0.0.0.0

19 - Subnet Mask : 255.255.255.0

20 - Gateway : 0.0.0.0 27 - MX3RMM Quick Setup Menu

21 - Date : 01/01/2005

22 - Time : 12:00:00

Selection : '?' - System Help Screen