Instruction manual

61200361L1-1E © 2002 ADTRAN, Inc. 77
CONNECTING TO THE NETVANTA 2000 SERIES
Introduction
The NetVanta 2000 series can be accessed and managed via the LAN interface using an ethernet crossover
cable (provided). Alternately, the NetVanta 2000 series may be acceslsed using a hub and two ethernet
cables (one for the PC and one for the NetVanta 2000 series). Using a PC with an installed browser
(Internet Explorer 5.5 for optimal viewing), the NetVanta 2000 series can be configured using an easy
GUI.
Prerequisite Procedures
The NetVanta 2000 series should be accessible to connect to a PC with an installed browser.
Tools and Materials Required
• Ethernet crossover cable (provided)
• DHCP-enabled PC with installed browser
This DLP assumes that a PC with DHCP-client software enabled will be used when
initially connecting to the NetVanta 2000 series.
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.