Technical data

90362-01 Dial-In Users 9-9

In the

Password

field, type the user’s password on their remote

workstation. In addition, if this user will be using PAP, you need to

set this password to correspond to the PAP “peer-passwd” on the

remote end.

In the

Crypto key

field, type the user’s crypto key. In addition, if this

user will be using CHAP, then you need to set this field to corre-

spond to the CHAP “secret” at the remote end.

Configuring ARA Users

You can use Worksheet 18, the “Dial-in ARA User” worksheet on

page B-21 to record the information necessary to complete the tasks in this

section.

To set up remote AppleTalk users, follow these steps:

When you select

ARA

on the New Dial-in User Connection Type

screen (or select the name of a previously configured ARA user),

you see the ARA User screen:

Figure 9-7. The ARA User Screen

ARA User: mac NetBlazer Setup Utility V3.0

Set up ARA user account to allow remote user access to the local

AppleTalk network.

DELETE mac

Password: <<NOT SET>>

Call back:

Home zone:

Time limit: unlimited

Help

Return to Main Menu

Press Enter to return to the previous screen