Technical data

10-2 Modem Pools 90362-01
The Dial-out Modem Pool screen appears.
Figure 10-2. The Dial-out Modem Pool Screen
3.
In the
Pool IP address
field, type an IP address. See Appendix C,
“IP Addressing,” for information on what IP addresses are and how
to find out what your modem pool’s IP address is.
Once the address is set, you can telnet to the address and the NetBlazer will
find the first available modem for you to use. You then issue a dial com-
mand to dial out from the modem. (For more information on the commands
to use when dialing a modem, see your modem manual.)
Dial-out Modem Pool NetBlazer Setup Utility V3.0
Set the IP address that can be used to access the modems attached
to the NetBlazer. If you telnet to this address, the NetBlazer
finds the first available modem for you to use.
Previous
Pool IP address: 0.0.0.0
Help
Return to Main Menu
Press Enter to return to the previous screen