Technical data

90362-01 Registering and Updating 11-5
If you leave the connection type set to auto , the NetBlazer uses the
connection type assumed to be the fastest for your situation (usually
internet
, followed by
isdn
, with
dialup
assumed to be the slowest of
the three).
5.
For
Phone number
, you should only change the default telephone
number for the update server if Telebit has informed you of a tele-
phone number change. Otherwise, leave the number set to the
default. If you accidentally delete the number, you can retype it in:
1-408-745-3105
. You can use dashes and paraentheses to format the
telephone number, or you can type a string of numbers with no
formatting.
If you are using ISDN, you can use either of two numbers:
1-408-745-3768 or 1-408-745-3769 . The first of those numbers auto-
matically appears in this field if you select
isdn
for
Connection type
.
6.
For
Phone prefix
, type the number or symbol you need to dial from
your own telephone lines to reach an outside line. For example, in
some locations you need to dial a 9 to reach an outside line. If your
modem needs to dial a prefix number, type that number in this field.
7. The next two fields are filled in automatically by the NetBlazer and
are not editable at this time. If you have not yet applied any updates,
you’ll notice that the
Kernel patch level
and the
File patch level
are
both set to none.
8.
Press Enter on
Delete Kernel patch
if you have previously applied a
Kernel patch that you now want to delete.
9. When you are done filling in the other fields, move to Query updates
and press Enter.
The NetBlazer displays some brief messages that relate to the type
of connection being made.
If no patches are found, the
Query updates field displays a message
stating that no patches were found.
Note:
If there is a problem with your connection, the NetBlazer displays a message
telling you to call customer support; call 1-800-TELEBIT (1-800-835-3248)
or 1-408-734-5200 for Customer Support.