Technical data

90362-01 NetBlazer LS Configuration Worksheets B-5
Worksheet 2. LAN Setup for IP
To configure your NetBlazer to route IP on the LAN:
1. Set your NetBlazer name and password (Worksheet 1).
2. Select “NetBlazer port setup” from the Main Menu screen.
3. Select “IP LAN” from the NetBlazer Port Setup screen, and work through the fields
below that apply to your network.
Global address/bits
______ . ______ .______ . ______ / ______
Bits (the number after the slash) are the number of bits in the network portion of the address.
The most common setting for bits is 24. For more information on IP addressing, see Appendix
C, "IP Addressing."
Domain name suffix
telebit.com. is one example of a domain name suffix.
Domain name server
______ . ______ .______ . ______
interface
address/bits en0 ______ . ______ .______ . ______ / ______
If you’ll also be routing IPX and/or AppleTalk, useWorksheet 3 and Worksheet 4as you
continue with the configuration. Or, you may want to save your configuration at this point;
return to the Main Menu and select “Save/Exit” to save.