Technical data

B-10 NetBlazer LS Configuration Worksheets 90362-01
Worksheet 7. Dial-up LAN-to-LAN Interface
To configure an interface for a dial-up LAN-to-LAN connection (or a dial backup):
1. Set NetBlazer name and password (Worksheet 1) and configure applicable
NetBlazer LAN protocols (Worksheet 2, Worksheet 3, or Worksheet 4).
2. Select “Dial-up LAN-to-LAN” from the Main Menu screen and work
through the fields below that apply to your connection.
New connection
This should be the remote NetBlazer’s name. This field is case sensitive.
Framing type
❏
SLIP
❏
PPP
Password
The password must be the same on the corresponding dial-up LAN-to-LAN interface
on the other NetBlazer. This field is case sensitive.
Crypto key
You must set either the password or the crypto key. This field is case sensitive.
Dial-in
❏
Yes
❏
No
Phone number
Characteristics
❏
Dialout
❏
ISDNdialout
It is advised you select dialout for most configurations, unless you are using ISDN.
The other settings for this field apply only in very limited circumstances.
3. Select “Protocol details” and continue configuring the current connection
for your protocols using Worksheet 8, Worksheet 9, and/or Worksheet 10.
Your
Local
Network
The
Remote
Network
Telephone
Network
NetBla