Technical data

B-14 NetBlazer LS Configuration Worksheets 90362-01
Worksheet 11. Dedicated LAN-to-LAN Interface
To configure an interface for a dedicated LAN-to-LAN connection:
1. Set NetBlazer name and password (Worksheet 1) and configure NetBlazer LAN
protocols (Worksheet 2, Worksheet 3, or Worksheet 4).
2. Select “Dedicated LAN-to-LAN” from the Main Menu screen.
3. Select a line and work through the fields below that apply.
If you have more than one line you need to configure, copy this page and fill out the fields
shown below with the additional information.
DEVICE INTERFACE Framing type Enable interface
❏
SLIP
❏
PPP
❏
Yes
❏
No
Devices on this screen may be named lineXX (where XX is the line number).
4. If you want to backup this dedicated line with a dial-up connection in case the
dedicated line goes down, move to “Dial backup” and type the name of an
existing dial-up interface.
Dial backup
If you need to create a new dial-up LAN-to-LAN interface to use as a dial backup for this
interface, use Worksheet 7, Worksheet 8, Worksheet 9, and Worksheet 10 to organize the
information you need to configure the new dial-up LAN-to-LAN connection.
5. Select “Protocol details” and continue configuring the current connection for
your protocols using Worksheet 12, Worksheet 13, and Worksheet 14.
Your
Local
Network
The
Remote
Network
Dedicated or
leased line
NetBla