Technical data

B-16 NetBlazer LS Configuration Worksheets 90362-01
Worksheet 13. Dedicated IPX Protocol
To configure a dedicated connection so your NetBlazer can use a dedicated line to route IPX
packets:
1. Set NetBlazer name and password (Worksheet 1) and configure NetBlazer
LAN protocols (Worksheet 2, Worksheet 3, or Worksheet 4).
2. Set up the interface as shown in the Dedicated LAN-to-LAN Interface
Worksheet (Worksheet 11).
3. On the Dedicated Interface screen, select “Protocol details”.
4. Select “Enable IPX”.
5. Once you know that the other end of the connection has been configured,
select “Learn IPX routes”.
When you select “Learn IPX routes” the NetBlazer dials the NetBlazer at the other
end of the link to learn its routing information. Allow up to three minutes for this to
be completed. You cannot proceed until this operation is complete.
Your
Local
Network
The
Remote
Network
Dedicated or
leased line
NetBla