Technical data

90362-01 NetBlazer LS Configuration Worksheets B-19
Worksheet 16. Dial-in IP User
To configure your NetBlazer so remote users can dial in and route IP packets:
1. Set NetBlazer name and password (Worksheet 1) and configure NetBlazer LAN protocols
(Worksheet 2, Worksheet 3, or Worksheet 4).
2. Select “Dial-in users” from the Main Menu screen and type a name for your user.
If you have more than one user, copy this page and fill out the fields shown with the additional
information for each dial-in IP user.
User name
This field is case sensitive.
3. Select “IP” for the connection type and fill in the appropriate fields on the Remote IP User
screen.
Password
This field is case sensitive. If this user will be using PAP, you need to set this field. This password needs
to correspond to the PAP “peer-passwd” on the remote end.
Crypto key
This field is case sensitive. If this user will be using CHAP, you need to set this field. This crypto key
needs to correspond to the CHAP “secret” at the remote end.
Framing type ❏ SLIP ❏ PPP
IP Address/bits ______ . ______ .______ . ______ / ______
See Appendix C, “IP Addressing” for more information on IP addressing. Normally, remote node users
are host routes and use 32 bits.
Your
Local
Network
Telephone
Network
Remote User