Technical data

2-2 NetBlazer LS Installation 90362-01
ISDN Installation
*Or, if your setup will be done remotely, connect the NetBlazer to a modem
so you can dial in to configure it.
Figure 2-2. ISDN Back Panel and Install Instructions
3.
Plug in the
power cable.
2. Connect any LAN cables to the
LocalTalk or Ethernet ports.
1.
Connect a null modem cable
from your computer to the
NetBlazer.*
ISDN
DTE Line 00
SYNC/ASYNC
PowerBNC UTPLocalTalk
4.
Connect the
NetBlazer to your
NT1.
NT1
5.
Connect the NT1 to the
Telephone company wall
outlet for your ISDN line.
6.
Turn on the power switch.
Ethernet
SN
MAC Addr
BRI