Technical data

3-10 Using the Setup Utility 90362-01
Working on the Main Menu Screen
The Main Menu screen displays the major tasks you need to perform to con-
figure the NetBlazer. After completing each task you should return to the
Main Menu to select another task.
1. Your cursor is initially on the First-time user help item; this item is
highlighted to show the location of the cursor. Press Enter to see a
menu of Help items relating to using the Setup Utility.
2. Use the Tab key or the Down Arrow key to move the highlight to
any of the other menu items and press Enter to configure that
application.
Select: To:
Using this
worksheet from
Appendix B:
NetBlazer setup
(Chapter 4)
Name the NetBlazer and set a password. Worksheet 1
NetBlazer port setup
(Chapter 4, Chapter 5,
Chapter 6)
Set up the NetBlazer to route IP, IPX, and/or
AppleTalk packets to and from the local networks.
Modify the default settings for any lines connected
to the NetBlazer.
Configure the NetBlazer to use an ISDN connec-
tion. You must have ISDN hardware in your
NetBlazer in order to select this menu item.
Worksheet 2
Worksheet 3
Worksheet 4
Worksheet 5
Worksheet 6
Dial-up LAN-to-LAN
(Chapter 7)
Configure the NetBlazer for dial-up routing
between the local network and a remote network.
Worksheet 7
Worksheet 8
Worksheet 9
Worksheet 10