Technical data

90362-01 NetBlazer and LAN Setup 4-7

On the NetBlazer Port Setup screen, select

IPX

LAN

. The IPX LAN

Setup screen appears.

Figure 4-4. The IPX LAN Setup Screen

In the

Global address

text field, specify the global IPX address for

the NetBlazer. The global address has two parts: the IPX network

number and the IPX node number. For example, you might enter

bac.1

for your global address. You must enter the network number

part of the address; however, if you don’t enter a node number (the

part after the period), the NetBlazer automatically generates a node

number for you. See Appendix D, “IPX Addressing,” for more

information on IPX addresses.

In most cases, the NetBlazer automatically determines the interface

address, but if it cannot determine this address, you need to set the

address

field yourself. If any interfaces on this screen are set to

the NetBlazer was unable to determine the address for that interface.

You may see interfaces named

en0

lt0

in the address field. Inter-

face names beginning with

are Ethernet interfaces. Interface

names beginning with

are LocalTalk interfaces.

IPX LAN Setup NetBlazer Setup Utility V3.0

Use this screen to set up the NetBlazer for a local IPX network.

You must set the Global address and assign a network address to

any interface that has not learned its address from the LAN.

Global address: 0

en0 address: 0

Help

Return to Main Menu

Press Enter to return to the previous screen