Technical data

90362-01 NetBlazer and LAN Setup 4-9
1. On the NetBlazer Port Setup screen, select AppleTalk LAN . The
AppleTalk LAN Setup screen appears.
Figure 4-5. The AppleTalk LAN Setup Screen
2.
For the first
router type
field shown, press the Spacebar to select
seed , nonseed , nonroute , or none .
You may see interfaces named
en
or
lt
for router type. Interface
names beginning with
en
are Ethernet interfaces. Interface names
beginning with lt are LocalTalk interfaces.
Select
nonroute
if you want the NetBlazer to appear only as a node
on a network. Select
nonseed
if you want to acquire route informa-
tion from another router on the LAN. (Selecting nonseed only works
if there is an AppleTalk seed router on the network.)
AppleTalk LAN Setup NetBlazer Setup Utility V3.0
Select AppleTalk router type for each interface. If you set an
interface as a seed router, you will be taken to another screen
to configure the router.
Previous
en0 router type: nonroute
lt0 router type: none
Help
Return to Main Menu
Press Enter to return to the previous screen
Note:
If you are running the Setup Utility through ADSP, and en0 is the default
port (that is, the first port configured), you can only change the en0 port
from
nonroute
to
nonseed
or from
nonroute
to
seed
. Any other selections re-
sult in an error message. (The default setting for en0 is nonroute .)