Technical data

8-8 Dedicated Connections 90362-01
7. To select the type of line management, move to the Line manage-
ment
field and press the Spacebar to select
LMI
,
ANSI
, or
none
.
LMI
is the local management interface Rev 1 as defined by the Frame
Relay Forum.
ANSI is the ANSI-defined Annex D management
option. If you aren’t sure which type of management to select, ask
your Service Provider for assistance.
8. The steps for setting the Protocol details for a Frame Relay interface
are the same as they are for both dial-up and dedicated interfaces, so
to save space those steps are described in Chapter 7,
“Dial-up Connections” instead of duplicating them here.
When you move to
Protocol details
and press Enter, the Setup Utility
displays the Protocol Details screen, which is described in “Setting
Protocol Details” on page 7-9.
You can use the following worksheets to record the information
necessary to complete the Protocol Details steps:
• Worksheet 12, the “Dedicated IP Protocol” worksheet on
page B-15
•
Worksheet 13, the “Dedicated IPX Protocol” worksheet on
page B-16
•
Worksheet 14, the “Dedicated AppleTalk Protocol” worksheet
on page B-17.