Technical data

9-2 Dial-In Users 90362-01
user logs on to the NetBlazer, the NetBlazer can be configured to automat-
ically issue a command (such as
telnet
hostname ) that is initiated the
moment the user connects to the NetBlazer; this shortcut is useful for those
who do the same process every time they log in.
Configuring a Dial-in User
To configure the NetBlazer so dial-in users can connect to the local network,
follow these steps:
1. Establish a connection to your NetBlazer as described on page 3-3.
2. On the Main Menu screen, select Dial-in users.
The Dial-in Users screen appears.
Figure 9-2. The Dial-in Users Screen
Dial-in Users NetBlazer Setup Utility V3.0
Set up dial-in users. Type a new user name or use the Arrow keys
to move to an existing name and press Enter to change its settings.
Previous
Help
Return to Main Menu
New user: <<NAME>>
001 root (character)
002 ruby (ip)
003 setup (character)
004 snmp (character)
Press Enter to return to the previous screen