ATLAS 830 System Manual 61200780L1-1A August 2002 1200780L1 ATLAS 830 System, AC 1200781L1 ATLAS 830 System, DC
Trademarks Any brand names and product names included in this manual are trademarks, registered trademarks, or trade names of their respective holders. To the Holder of the Manual The contents of this manual are current as of the date of publication. ADTRAN reserves the right to change the contents without prior notice.
About this Manual This manual provides a complete description of the ATLAS 830 system and system software. The purpose of this manual is to provide the technician, system administrator, and manager with general and specific information related to the planning, installation, operation, and maintenance of the ATLAS 830. This manual is arranged so that needed information can be quickly and easily found. The following is an overview of the contents. Section 1 System Description . . . . . . . . . . . . . . . .
Notes provide additional useful information. Cautions signify information that could prevent service interruption. Warnings provide information that could prevent damage to the equipment or endangerment to human life. Safety Instructions When using your telephone equipment, please follow these basic safety precautions to reduce the risk of fire, electrical shock, or personal injury: 1.
Affidavit Requirements for Connection to Digital Services • • • An affidavit is required to be given to the telephone company whenever digital terminal equipment without encoded analog content and billing protection is used to transmit digital signals containing encoded analog content which are intended for eventual conversion into voiceband analog signals and transmitted on the network.
Affidavit for Connection of Customer Premises Equipment to 1.544 Mbps and/or Subrate Digital Services For the work to be performed in the certified territory of ___________________ (telco name) State of ________________ County of ________________ I, _______________________ (name), ____________________________________ (business address), ____________________ (telephone number) being duly sworn, state: I have responsibility for the operation and maintenance of the terminal equipment to be connected to 1.
I agree to provide ______________________ (telco’s name) with proper documentation to demonstrate compliance with the information as provided in the preceding paragraph, if so requested.
FCC regulations require that the following information be provided in this manual: 1. This equipment complies with Part 68 of FCC rules. On the back of the equipment housing is a label showing the FCC registration number and ringer equivalence number (REN). If requested, provide this information to the telephone company. 2. If this equipment causes harm to the telephone network, the telephone company may temporarily discontinue service.
Federal Communications Commission Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Industry Canada Compliance Information Notice: The Industry Canada label applied to the product (identified by the Industry Canada logo or the “IC:” in front of the certification/registration number) signifies that the Industry Canada technical specifications were met. Notice: The Ringer Equivalence Number (REN) for this terminal equipment is supplied in the documentation or on the product labeling/markings.
Warranty and Customer Service ADTRAN will repair and return this product within 5 years from the date of shipment if it does not meet its published specifications or fails while in service. For detailed warranty, repair, and return information refer to the ADTRAN Equipment Warranty and Repair and Return Policy Procedure. Return Material Authorization (RMA) is required prior to returning equipment to ADTRAN.
Customer Service, Product Support Information, and Training ADTRAN will repair and return this product if within 5 years from the date of shipment the product does not meet its published specification or the product fails while in service. A return material authorization (RMA) is required prior to returning equipment to ADTRAN. For service, RMA requests, training, or more information, use the contact information given below.
Post-Sale Support Your reseller should serve as the first point of contact for support. If additional support is needed, the ADTRAN Support web site provides a variety of support services such as a searchable knowledge base, updated firmware releases, latest product documentation, service request ticket generation and trouble-shooting tools. All of this, and more, is available at: http://support.adtran.com When needed, further post-sales assistance is available by calling our Technical Support Center.
61200780L1-1A © 2002 ADTRAN, Inc.
SYSTEM DESCRIPTION This section of ADTRAN’s ATLAS 830 System Manual is designed for use by network engineers, planners, and designers for overview information about the ATLAS 830. It contains general information and describes physical and operational concepts, card functions, network relationships, provisioning, testing, alarm status, and system monitoring. This section should be used in conjunction with Section 2, Engineering Guidelines, of the system manual. CONTENTS System Overview . . . . . . . . . . .
Section 1, System Description 1. ATLAS 830 System Manual SYSTEM OVERVIEW The ATLAS 830 is a modular, highly scalable platform that provides robust solutions for the wide-area communication needs of medium-to-large corporations and network access providers. The ATLAS 830 is an Integrated Access System with extensive support of dedicated bandwidth management and access switching.
ATLAS 830 System Manual Section 1, System Description ISDN Switch Types • 5ESS™, DMS-100™, National ISDN, 4ESS™, Euro ISDN Dedicated Connection Maps • • • • Up to five connection maps Time of day/day of week configurable Preserves signaling through cross-connect No effect on non-configured channels Switched Connection Maps • Inbound and outbound call filtering and blocking Testing • • Local and remote: payload/line, V.
Section 1, System Description 3.
ATLAS 830 System Manual Section 1, System Description Quad Nx 56/64 Option Module (P/N 1200184L1) The Quad Nx 56/64 module provides four synchronous V.35 DTE ports (using supplied DB-78 to V.35 converter cables) that can operate from 56K to 2.048 Mbps in steps of 56 or 64 kbps. Any port can deliver timing for the system. Quad USSI Option Module (P/N 4200261Lx) The Quad USSI Option Module provides four synchronous DTE ports that can operate from 56K to 2.048 Mbps in steps of 56 or 64 kbps.
Section 1, System Description ATLAS 830 System Manual Octal FXS Option Module (P/N 1200338L1) The Octal FXS Option Module provides eight analog voice-grade interfaces. Each interface provides talk battery, off-hook supervision, E&M signaling conversion, and ringing in loop-start or ground-start operation. Call progress tones, where necessary, are provided to the modules by the ATLAS 830.
ENGINEERING GUIDELINES CONTENTS Equipment Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 AC System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 DC System . . . . . . . . . . . . . . . . . . . . . . .
Section 2, Engineering Guidelines Table 6. Table 7. Table 8. Table 9. Table 10. Table 11. Table 12. Table 13. Table 14. Table 15. Table 16. Table 17. Table 18. Table 19. Table 20. Table 21. Table 22. Table 23. Table 24. Table 25. Table 26. Table 27. Table 28. Table 29. 22 ATLAS 830 System Manual Alarm Relay Connector Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 T1/PRI Pinout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ATLAS 830 System Manual 1. Section 2, Engineering Guidelines EQUIPMENT DIMENSIONS The ATLAS 830 is 17.5” W, 12.5” D, and 5.5” H and is equipped for table top use or mounted in a 19-inch rack (mounting brackets included in shipment). All other equipment (option modules) fit inside the unit. 2. POWER REQUIREMENTS AC System The ATLAS 830 has a maximum power consumption of 200 W and a maximum current draw of 3.5 A regardless of the configuration of option modules installed in the unit.
Section 2, Engineering Guidelines ATLAS 830 System Manual ACO Switch The ACO switch deactivates (clears) the Alarm Relay, located on the rear panel of the ATLAS 830, after an alarm condition has occurred. If an alarm condition is corrected and then reoccurs, the Alarm Relay will activate again. CRAFT Port Use the CRAFT port to configure the system via an EIA-232 connection. The connector type is shown below, and Table 1 gives the CRAFT port pinout. Connector type DB-9 (female) Table 1.
ATLAS 830 System Manual Section 2, Engineering Guidelines Table 2. ATLAS 830 Front Panel Description (Continued) Feature Description Network Port LEDs Displays the status of the two built-in T1/PRI interfaces on the rear panel of the unit. (These are referred to in the menus as Slot 0, Ports 1 and 2.) OK Indicates that the network interface has passed self test and is operating correctly. Test Indicates that there is an active test on the T1/PRI interface.
Section 2, Engineering Guidelines ATLAS 830 System Manual Table 3. ATLAS 830 LEDs (Continued) For these LEDs... This color light... Indicates that... Red (fast blink) Flash download or flash error condition. Off Power is not currently supplied to the system or the power switch is in the off position. Green Link has been established. Off Link has not been established. Yellow A user is logged into the unit via Telnet or VT100. Off No users are logged into the unit.
ATLAS 830 System Manual 4. Section 2, Engineering Guidelines REVIEWING THE REAR PANEL DESIGN The ATLAS 830 rear panel contains an ADMIN port for connecting to a VT100 terminal (or terminal emulator) or modem, a 10/100BaseT interface for ethernet access, alarm contacts, two built-in T1/PRI interfaces, and 8 slots for housing option modules which provide a variety of additional resources and data ports. All slots are functionally identical.
Section 2, Engineering Guidelines ATLAS 830 System Manual Admin Port The Admin port (EIA-232) connects to a computer or modem. The control port input provides the following functions: • Accepts EIA-232 input from a PC or a modem for controlling the ATLAS 830. • Operates at 2400, 9600, 19200, or 38400 bps. • Acts as input for either VT100 or PC control. • Acts as an interface for flash memory software downloads using XMODEM. The Admin connection follows, and Table 4 shows the pinout.
ATLAS 830 System Manual Section 2, Engineering Guidelines Alarm Relay Connection This connection alerts the user when a selected alarm condition exists. The four-pin, removable terminal block connects with external wiring. Refer to DLP-011, Connecting the Alarm Contacts for detailed instructions. Clear the alarm condition by pressing the ACO switch located on the front panel of the ATLAS 830. Table 6 shows the pinout for the Alarm Relay connector. Table 6.
Section 2, Engineering Guidelines 5. ATLAS 830 System Manual OPTION MODULES Quad T1/PRI Option Module (P/N 1200185L3) Each port of the Quad T1/PRI Option Module uses a single, eight-position modular jack to connect to the T1 or PRI circuit. Table 7 gives the pinout for this jack. CONNECTOR TYPE (USOC) RJ-48C Table 7.
ATLAS 830 System Manual Section 2, Engineering Guidelines Table 9.
Section 2, Engineering Guidelines ATLAS 830 System Manual Table 10. V.35 Winchester Pinout (Continued) Pin CCITT DESCRIPTION V 115 RX clock (RC-A) to DTE X 115 RX clock (RC-B) to DTE P 103 Transmitted data (TD-A) from DTE S 103 Transmitted data (TD-B) from DTE Y 114 TX clock (TC-A) to DTE AA 114 TX clock (TC-B) to DTE U 113 External TX clock (ETC-A) from DTE W 113 External TX clock (ETC-B) from DTE NN — Test mode (TM) to DTE Table 11.
ATLAS 830 System Manual Section 2, Engineering Guidelines Table 11.
Section 2, Engineering Guidelines ATLAS 830 System Manual Table 12.
ATLAS 830 System Manual Section 2, Engineering Guidelines Connector type RS-449/V.36 System part number 4200261L1 Table 14. RS-449/V.
Section 2, Engineering Guidelines Connector type RS-232 System part number 4200261L4 ATLAS 830 System Manual Table 15. RS-232 Connector Pinout Pin Signal Description Pin Signal Description 1 Shield (Ground) 14 Sec. Transmit Data 2 Transmit Data 15 DCE Transmit Clock 3 Received Data 16 Sec. Received Data 4 Request to Send 17 Receive Signal Element Timing 5 Clear to Send 18 Not used 6 Data Set Ready 19 Sec.
ATLAS 830 System Manual Section 2, Engineering Guidelines Octal BRI ISDN (U-Interface) Option Module (P/N 1200186L2) Each port of the Octal BRI ISDN (U-Interface) Option Module uses a single RJ-45 jack to connect to a standard BRI U interface circuit. Table 17 shows the network pinout connection. The required wiring connection follows: Connector Type RJ-45 Table 17.
Section 2, Engineering Guidelines ATLAS 830 System Manual Async-232 Option Module (P/N 1200182L1) Each Async-232 Interface provides a DB-25 connection as defined in Table 19 using provided adapter cables. Table 19.
ATLAS 830 System Manual Section 2, Engineering Guidelines T3 Drop and Insert Option Module (P/N 1200225L1) Each T3 Drop and Insert Option Module provides BNC connectors for both primary and secondary transmit and receive connections as defined in Table 21 using provided RG 59, 75 ohm cables (P/N 3125I054). Connector Type BNC pair (female) Table 21.
Section 2, Engineering Guidelines ATLAS 830 System Manual Table 22. RS-366 Interface Pinout (Continued) 16 NB4 Digit Signal Circuit 4 17 NB8 Digit Signal Circuit 8 18 RC Receive Common 19 SC Send Common 20-21 Unused 22 DLO 23-25 Unused n/a Data Link Occupied n/a Connector type V.35 Winchester System part number 4200773L1 Table 23. V.
ATLAS 830 System Manual Section 2, Engineering Guidelines Table 23. V.35 Winchester Pinout (Continued) W 113 ETC-B NN — TM Connector type EIA-530 System part number 4200773L2 External TX clock from DTE Test mode to DTE - (Not Supported) Table 24.
Section 2, Engineering Guidelines ATLAS 830 System Manual Table 25.
ATLAS 830 System Manual Connector Type Section 2, Engineering Guidelines HSSI (SCSI-50) or V.35 Winchester (using optional adapter cable) Table 27. SCSI-II (50-pin) and V.
Section 2, Engineering Guidelines ATLAS 830 System Manual Octal FXS Option Module (P/N 1200338L1) The Octal FXS Option Module provides eight analog voice-grade interfaces. Each interface can operate in loop-start or ground-start mode, providing talk battery, off-hook supervision, ringing, and E&M signaling conversion. Call progress tones, where necessary, are provided to the modules by the ATLAS 830. Connector Type 8-pin modular Table 28.
ATLAS 830 System Manual 6. Section 2, Engineering Guidelines AT-A-GLANCE SPECIFICATIONS Table 29 lists the specifications for the ATLAS 830 system. Table 29.
Section 2, Engineering Guidelines ATLAS 830 System Manual Table 29. Specifications (Continued) Application Feature Specification Frame Relay Packet throughput 7900 pkts/sec (based on 64 byte size packets) Management signaling interfaces UNI (user and network) NNI Management signaling types ANSI T1.617-D (Annex D) ITU-T Q.933-A (Annex A) LMI (Group of four) Auto Encapsulation RFC 1490 PVC support 24 PVCs per packet endpoint (DS0 limited, 24 PVCs for T1).
ATLAS 830 System Manual Section 2, Engineering Guidelines Table 29. Specifications (Continued) Application Feature Specification IP Routing Route discovery RIP V1 RIP V2 ICMP ARP IARP UDP Relay SNMP support RFCs 1315, 1213, 1406 Adtran Enterprise MIB Algorithm Voice Compression Module G.723.
Section 2, Engineering Guidelines 48 ATLAS 830 System Manual © 2002 ADTRAN, Inc.
NETWORK TURNUP PROCEDURE CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Unpack and Inspect the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Contents of ADTRAN Shipment . . . . . . . .
Section 3, Network Turnup Procedure 1. ATLAS 830 System Manual INTRODUCTION This section discusses the installation process for the ATLAS 830. 2. TOOLS REQUIRED The tools required for installation of the ATLAS 830 shelf are: • • #2 Phillips-head screwdriver Flat-head screwdriver (for installing modules) To prevent electrical shock, do not install equipment in a wet location or during a lightning storm. Electronic modules can be damaged by static electrical discharge.
ATLAS 830 System Manual 4. Section 3, Network Turnup Procedure GROUNDING INSTRUCTIONS The following provides grounding instruction information from the Underwriters’ Laboratory UL60950 Standard for Safety of Information Technology Equipment Including Electrical Business Equipment, Third Edition, December 1, 2000. An equipment grounding conductor that is not smaller in size than the ungrounded branch-circuit supply conductors is to be installed as part of the circuit that supplies the product or system.
Section 3, Network Turnup Procedure • ATLAS 830 System Manual • Power to the ATLAS 830 AC system must be from a grounded 90-130/190-240 VAC, 50/60 Hz source. The power receptacle uses double-pole, neutral fusing. • Maximum recommended ambient operating temperature is 45 oC. DC Powered Systems The DC powered ATLAS 830 comes equipped with a DC Power supply to furnish the voltages necessary for proper backplane operation. As shipped, the ATLAS 830 is set to factory default conditions.
ATLAS 830 System Manual 7. Section 3, Network Turnup Procedure INSTALLING NETWORK AND OPTION MODULES Figure 1 shows the option slot numbering designation as viewed from the rear of the ATLAS 830. Figure 1. ATLAS 830 Slot Designation (Rear Panel) Option modules are intended to be serviced by qualified service personnel only. 61200780L1-1A © 2002 ADTRAN, Inc.
Section 3, Network Turnup Procedure ATLAS 830 System Manual Instructions for Installing the ATLAS 830 Option Modules Instructions for Installing the ATLAS 830 Option Modules Step Action 1 Remove the cover plate from the appropriate option slot of the ATLAS 830 rear panel. 2 Slide the Option Module into the option slot until the module is firmly seated against the front of the chassis. 3 Secure the thumbscrews at both edges of the module. Tighten with a screwdriver.
ATLAS 830 System Manual Section 3, Network Turnup Procedure Quad Nx 56/64 Option Module (P/N 1200184L1) Shipping Contents The ADTRAN shipment of the Quad Nx 56/64 Option Module includes the following items: • • • Quad Nx 56/64 Option Module Quad Nx 56/64 Option Module Quick Start Guide Two DB-37 to V.
Section 3, Network Turnup Procedure ATLAS 830 System Manual T3 Option Module (P/N 1200223L1) Shipping Contents The ADTRAN shipment of the T3 Option Module includes the following items: • • • T3 Option Module T3 Option Module Quick Start Guide Two 6 ft.
ATLAS 830 System Manual Section 3, Network Turnup Procedure 8,16,24,32 Channel Voice Compression Resource Modules (P/N 1200221Lx) Shipping Contents The ADTRAN shipment of the 8,16,24,32 Channel Voice Compression Resource Modules includes the following items: • • 8,16,24,32 Channel Voice Compression Resource Modules 8,16,24,32 Channel Voice Compression Resource Modules Quick Start Guide Nx 56/64 BONDing Resource Module (P/N 1200262L1) Shipping Contents The ADTRAN shipment of the Nx 56/64 BONDing Resource
Section 3, Network Turnup Procedure ATLAS 830 System Manual Dual Video Option Module (P/N 4200773Lx) Shipping Contents The ADTRAN shipment of the Dual Video Option Module includes the following items: • Dual Video Option Module • Dual Video Option Module Quick Start Guide And one of the following: • • • 58 V.35 (System P/N 4200773L1, Cable P/N 1200774L1) EIA-530 (System P/N 4200773L2, Cable P/N 1200774L2) RS-449 (System P/N 4200773L3, Cable P/N 1200774L3) © 2002 ADTRAN, Inc.
USER INTERFACE GUIDE This section of ADTRAN’s ATLAS 830 System Manual is designed for use by network administrators and others who will configure and provision the system. It contains information about navigating the VT100 user interface, configuration information, and menu descriptions. CONTENTS Navigating the Terminal Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Terminal Menu Window . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Section 4, User Interface Guide ATLAS 830 System Manual Dial Plan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dial Plan (DS3 and DS3 D&I) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dial Plan (E1/PRA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dial Plan (V35Nx) . . . . . . . . . . . . . . . .
ATLAS 830 System Manual 1. Section 4, User Interface Guide NAVIGATING THE TERMINAL MENU Log in to the ATLAS 830 by connecting a standard straight-through serial cable to a VT100 terminal (or PC with VT100 emulator) and the DB-9 CRAFT port located on the front panel of the unit or the ADMIN port on the rear panel of the unit. Configure the terminal settings for 9600 data rate, No parity, 8 data bits, 1 stop bit, and no flow control. After you connect to the unit, a login screen will appear.
Section 4, User Interface Guide ATLAS 830 System Manual You can view the terminal windows in two ways: with fields and submenus displaying horizontally across the right pane, or with fields and submenus displaying vertically down the right pane. Viewing submenus vertically rather than horizontally allows you to see information at a glance rather than scrolling horizontally across the window. To change the view, move your cursor to an index number and press . Figure 2 shows this alternate view.
ATLAS 830 System Manual Section 4, User Interface Guide Right Window Pane Notation The right window pane shows the contents of the currently selected menu. These contents can include both submenu items and data fields. Some submenus contain additional submenus and some data fields contain additional data fields. The following chart explains the notation used to identify these additional items. This notation... Means that...
Section 4, User Interface Guide ATLAS 830 System Manual Moving through the Menus To do this... Press this key... Return to the home screen H Jump between two menu items J Press while the cursor is located on a menu item, and you jump back to the main screen. Go to another menu item, press , and you jump back to the screen that was displayed the first time you pressed . Press anytime you want to jump between these items.
ATLAS 830 System Manual Section 4, User Interface Guide To do this... Press this key... CTRL+R Refresh the screen To save time, only the portion of the screen that has changed is refreshed. This option should only be necessary if the display picks up incorrect characters caused by disconnecting and reconnecting the terminal session. CTRL+V View Extended Data Display data fields too large for display window. Configuration Keystrokes To do this... Press this key... F Restore factory default settings.
Section 4, User Interface Guide ATLAS 830 System Manual To do this... Press this key... I Insert a new list item. For example, add a new item to the DEDICATED MAP connection list by pressing while the cursor is over the index number. D Delete a list item. For example, delete an item from the DEDICATED MAP connection list by pressing while the index number is active. Getting Help The bottom line of the terminal menu window contains context-sensitive help information.
ATLAS 830 System Manual 2. Section 4, User Interface Guide TERMINAL MENU AND SYSTEM CONTROL Selecting the Appropriate Menu The terminal menu is the access point to all other operations. Each terminal menu item has several functions and submenus that identify and provide access to specific operations and parameters. Use the chart below to help select the appropriate terminal menu. To do this... Go to this menu...
Section 4, User Interface Guide ATLAS 830 System Manual Security Levels To edit terminal menu items, you must have a password and the appropriate security level. Table 1 describes the six security levels. Table 1. Password Security Levels Security Level 3.
ATLAS 830 System Manual Section 4, User Interface Guide SYSTEM INFO The SYSTEM INFO menu provides basic information about the unit as well as data fields for editing information. Figure 3 displays the submenus and data fields that are available when you select this menu item. Figure 3. System Info Menu SYSTEM INFO > SYSTEM NAME Write security: 3; Read security: 5 Provides a user-configurable text string for the name of the ATLAS 830. This name can help you distinguish between different installations.
Section 4, User Interface Guide ATLAS 830 System Manual SYSTEM INFO > FIRMWARE REVISION Read security: 5 Displays the current firmware revision level of the controller. SYSTEM INFO > SYSTEM UPTIME Read security: 5 Displays the length of time the ATLAS 830 system has been running. Each time you reset the system, this value resets to 0 days, 0 hours, 0 min and 0 secs. SYSTEM INFO > STARTUP MODE Read security: 5 Displays details about the last system startup.
ATLAS 830 System Manual Section 4, User Interface Guide SYSTEM STATUS The SYSTEM STATUS menu provides the user with status information about the ATLAS 830 operational parameters including logged system events and timing. Figure 4 displays the submenus and data fields that are available when you select this menu item. Figure 4. System Status Menu SYSTEM STATUS > EVENT LOG Displays the last 349 warning or failure messages sent including the day, date, and priority of the message.
Section 4, User Interface Guide ATLAS 830 System Manual SYSTEM STATUS > EVENT LOG > SLOT Displays the slot number in which the event occurred. If this field displays (0), the event that occurred was on one of the two built-in network ports. SYSTEM STATUS > EVENT LOG > PORT Displays the port in which the event occurred. SYSTEM STATUS > EVENT LOG > EVENT DESCRIPTION Displays a description of the event. SYSTEM STATUS > CLEAR SYSTEM EVENT LOG Write security: 3; Read security: 3 Clears the event log.
ATLAS 830 System Manual Section 4, User Interface Guide SYSTEM STATUS > ADMIN PORT Write security: 2; Read security: 5 Displays the status of the DB-9 (female) Admin port. SYSTEM STATUS > ADMIN PORT > SIGNAL LEADS Displays the state of the Admin port signals (RTS, CTS, DTR, and DCD). SYSTEM STATUS > ADMIN PORT > TX BYTES Displays the number of bytes transmitted from the Admin port. SYSTEM STATUS > ADMIN PORT > RX BYTES Displays the number of bytes received by the Admin port.
Section 4, User Interface Guide ATLAS 830 System Manual SYSTEM STATUS > CRAFT PORT > CLEAR COUNTERS Write security: 5; Read security: 5 Clears the Craft port statistics. Press Y to activate this command. SYSTEM STATUS > SYSTEM ALARMS Read security: 5 Contains alarm information for the ATLAS 830 system including power and temperature alarms.
ATLAS 830 System Manual Section 4, User Interface Guide SYSTEM STATUS > RESOURCE USAGE > DATA TABLES Read security: 5 Displays resource usage for dynamic resources throughout the system in a table format. SYSTEM STATUS > RESOURCE USAGE > DATA TABLES > RESOURCE TYPE Displays types of dynamically allocated resources being tracked throughout the system. Examples are ANALOG (analog modem resource), SW DIGITAL (digital call resource), and PKT VOICE (packet voice compression resource).
Section 4, User Interface Guide ATLAS 830 System Manual SYSTEM STATUS > RESOURCE USAGE > CONFIG > RESET MODE Write security: 3; Read security: 5 Sets the reset mode for the RESOURCE USAGE statistics to one of the following: DAILY performs reset daily at 12:00 AM WEEKLY performs reset on Saturday night, 12:00 AM MANUAL disables automatic reset of the resource usage statistics SYSTEM STATUS > TRUNK USAGE Write security: 5; Read security: 5 Indicates trunk use: (NET TERM PRI, NET TERM RBS; USER TERM
ATLAS 830 System Manual Section 4, User Interface Guide SYSTEM STATUS > TRUNK USAGE > DATA TABLES > 0 (ZERO) AVAIL Provides a count of the number of times the quantity of available resources reached 0. SYSTEM STATUS > TRUNK USAGE > DATA TABLES > SLT/PRT Displays the usage data (CURRENT, AVERAGE, MIN, 0 AVAIL, and HR DATA) broken down by slots and ports. SYSTEM STATUS > TRUNK USAGE > DATA TABLES > RESET Write security: 4; Read security: 5 Activates the reset of all accumulated availability statistics.
Section 4, User Interface Guide ATLAS 830 System Manual SYSTEM CONFIG The SYSTEM CONFIG menu allows you to set up the ATLAS 830 operational configuration. Figure 5 shows the items included in this menu. Figure 5. System Config Menu SYSTEM CONFIG > PRIMARY TIMING SOURCE Write security: 1; Read security: 5 Selects the primary timing source. You can select either INTERNAL or any port available on the system that is capable of providing timing.
ATLAS 830 System Manual Section 4, User Interface Guide SYSTEM CONFIG > SESSION TIMEOUT Write security: 3; Read security: 5 Defines the number of seconds the terminal session must remain idle before the session times out (valid range 0 to 65535). You can enter zero to deactivate this option (the session will never time out). SYSTEM CONFIG > MAX TELNET SESSIONS Write security: 3; Read security: 5 Defines the maximum number of Telnet sessions that can be active at the same time.
Section 4, User Interface Guide ATLAS 830 System Manual SYSTEM CONFIG > ETHERNET PORT > MAC ADDRESS Displays the system Ethernet Media Access Control (MAC) address. This field is read-only. SYSTEM CONFIG > ETHERNET PORT > ETHERNET SPEED Defines the rate at which the ethernet port operates. Choose from 10 MBPS or AUTO 10/100. When the unit is set for Auto 10/100, the ATLAS 830 auto detects the data rate of the LAN and sets itself to that rate, either 10 or 100 Mbps.
ATLAS 830 System Manual Section 4, User Interface Guide SYSTEM CONFIG > CRAFT PORT > PORT NAME Defines the name of the Craft port. You can leave this field blank. SYSTEM CONFIG > CRAFT PORT > PORT SPEED Specifies the baud rate of the port. Select either 2400, 9600, 19200, or 38400 to match the VT100 terminal (or emulator) settings. SYSTEM CONFIG > SNMP Write security: 3; Read security: 5 Provides a way to configure SNMP access for the ATLAS 830.
Section 4, User Interface Guide ATLAS 830 System Manual SYSTEM CONFIG > SNMP > AUTHEN TRAP TRANSMISSION Write security: 3; Read security: 5 Enables and disables the authentication failure trap. SYSTEM CONFIG > SNMP > TRAPS DESTINATION Write security: 3; Read security: 5 Defines the destination for SNMP traps as follows: SYSTEM CONFIG > SNMP > TRAPS DESTINATION > IP ADDRESS Identifies the IP address for the network manager (NM) to sends traps.
ATLAS 830 System Manual Section 4, User Interface Guide SYSTEM CONFIG > SNMP > DS1 CURRENT PERF THRESHOLDS > CURRENT SES THRSH The DS1 performance monitor Threshold Value for the Current 15 minute Severely Errored Seconds (SES) parameter. The default value is 10 for an approximate BER level of 10E-5. SYSTEM CONFIG > SNMP > DS1 CURRENT PERF THRESHOLDS > CURRENT SEFS THRSH The DS1 performance monitor Threshold Value for the Current 15 minute Severely Errored Framing Seconds (SEFS) parameter.
Section 4, User Interface Guide ATLAS 830 System Manual SYSTEM CONFIG > SNMP > DS1 TOTAL PERF THRESHOLDS Write security: 3; Read security: 5 Defines performance threshold values for DS1 Line and Path statistics. Refer to the ADTRAN Enterprise MIB and DS1 Extension MIB (available on the ADTRAN website at www.adtran.com) for more MIB specific information. If a statistic value exceeds its threshold value, then the corresponding Alert Trap will be sent if the alert event is armed and Alert Traps are enabled.
ATLAS 830 System Manual Section 4, User Interface Guide SYSTEM CONFIG > SNMP > DS1 TOTAL PERF THRESHOLDS > TOTAL LCV THRSH The DS1 performance monitor Threshold Value for the Total Line Code Violations (LCV) parameter. The default value is 133,400 for an approximate BER level of 10E-5. SYSTEM CONFIG > SNMP > ASP ENDPOINT COMMUNITIES Write security: 0; Read security: 0 Configures the ADLP list used when accepting incoming traps from remote ADTRAN TSU 100 Series or ISU 512 units.
Section 4, User Interface Guide ATLAS 830 System Manual SYSTEM CONFIG > SYSLOG SETUP Write security: 3; Read security: 3 Configures the ATLAS 830 Syslog client for use with a Syslog server (supplied with ADTRAN Utilities or available on most UNIX platforms).
ATLAS 830 System Manual Section 4, User Interface Guide SYSTEM CONFIG > ACCESS PASSWORDS > LABEL Defines a username. SYSTEM CONFIG > ACCESS PASSWORDS > PASSWORD Allows you to change the password (the default password is “password”). The current password displays as a series of asterisks (********). The password can contain up to a combination of 12 case-sensitive alphanumeric characters, spaces, or special characters.
Section 4, User Interface Guide ATLAS 830 System Manual SYSTEM CONFIG > BONDING CONFIG > TXFA TIMER Specifies the length of time both endpoints attempt to detect the BONDING frame pattern when a call is connected before deciding the BONDING call has failed. When interoperating with other manufacturers' BONDING equipment, it may be necessary to change this time so that it matches TXADD01.
ATLAS 830 System Manual Section 4, User Interface Guide SYSTEM CONFIG > ALARM RELAY RESET Write security: 3; Read security: 5 Clears the Alarm Relay located on the rear panel of the ATLAS 830. Activating the software Alarm Relay Reset functions the same as manually pressing the ACO Switch located on the ATLAS 830 front panel. SYSTEM CONFIG > ALARM RELAY STATE Write security: 3; Read security: 5 Configures the alarm relay response during an active alarm.
Section 4, User Interface Guide ATLAS 830 System Manual SYSTEM UTILITY > UPDATE FIRMWARE Write security: 1; Read security: 5 Updates firmware when ATLAS 830 enhancements are released. Two transfer methods are available for use in updating any modules that contain Flash memory—including the ATLAS 830 system controller. The first transfer method uses the ATLAS 830 serial Admin port of the system controller and XMODEM protocol.
ATLAS 830 System Manual Section 4, User Interface Guide SYSTEM UTILITY > UPDATE FIRMWARE > RESTART SCHEDULE > RESTART IMMEDIATELY AFTER UPDATE Write security: 1; Read security: 5 Automatically restarts the module or unit (when SLOT 0 is selected) immediately after the update is complete.
Section 4, User Interface Guide ATLAS 830 System Manual SYSTEM UTILITY > UPDATE FIRMWARE > CURRENT UPDATE STATUS > PREVIOUS TIME Indicates the time of the previous update. During the TFTP upload process, various status messages are provided in the CURRENT UPDATE STATUS field. For a detailed listing of these messages, please refer to DLP-006. SYSTEM UTILITY > UPDATE FIRMWARE > PREVIOUS UPDATE STATUS Read security: 5 Displays the status of the previous update, after selecting a module slot.
ATLAS 830 System Manual Section 4, User Interface Guide SYSTEM UTILITY > CONFIG TRANSFER > TRANSFER METHOD Write security: 3; Read security: 5 Displays the method used to transfer the configuration file to or from a server. Currently, TFTP is required. SYSTEM UTILITY > CONFIG TRANSFER > TFTP SERVER IP ADDRESS Write security: 3; Read security: 5 Specifies the IP address of the TFTP server. Get this address information from your System Administrator.
Section 4, User Interface Guide ATLAS 830 System Manual SYSTEM UTILITY > SYSTEM SELFTEST Write security: 3; Read security: 5 Initiates a system self-test. The self-test consists of memory tests and data integrity tests for each installed module. Self-tests disrupt data flow. SYSTEM UTILITY > SYSTEM SELFTEST > SELFTEST Write security: 3; Read security: 5 Activates the self-test. To confirm self-test activation, press Y; to cancel the self-test press N.
ATLAS 830 System Manual Section 4, User Interface Guide SYSTEM UTILITY > SYSTEM SELFTEST > VIEW SELFTEST LOG Read security: 5 Displays time-stamped log of the tests conducted and the Pass/Fail results. Self-tests verify data integrity and processor control to each port. Each port is looped back and a data pattern is sent and tested. The result of the self-test on each installed port is listed with Pass/Fail results. Figure 7 depicts a typical test log.
Section 4, User Interface Guide ATLAS 830 System Manual The tests associated with the system controller are shown in Figure 8. THIS EVENT... LOGS THIS RESULT...
ATLAS 830 System Manual Section 4, User Interface Guide SYSTEM UTILITY > PING > COUNT Write security: 5; Read security: 5 Specifies the number of pings to send. The default value is 4, and the maximum value is 99. SYSTEM UTILITY > PING > SIZE (BYTES) Write security: 5; Read security: 5 Specifies the size in bytes of the data portion of the ping request. The default value is 64 bytes, and the maximum size is 1024 bytes.
Section 4, User Interface Guide ATLAS 830 System Manual SYSTEM UTILITY > ATEL CLIENT Write security: 5; Read security: 5 Allows a user to remotely configure ADTRAN TSUs using ADLP over the inband management channel on a V.35 port. This feature only allows for remote sessions through the ATLAS 830 to the TSUs, not vice versa. SYSTEM UTILITY > ATEL CLIENT > ATEL ADDRESS Write security: 5; Read security: 5 Defines the ADLP address (Unit ID) assigned to the remote unit you are trying to connect to.
ATLAS 830 System Manual Section 4, User Interface Guide SYSTEM UTILITY > TELNET CLIENT > CONNECT Write security: 5; Read security: 5 Activator used to start a Telnet session to the remote unit configured in the ADDRESS field. SYSTEM UTILITY > CLIENT STATUS Write security: 5; Read security: 5 Displays status from current Telnet client sessions. SYSTEM UTILITY > CLIENT STATUS > USER NAME Displays the username (from access passwords list) that has an active Telnet client session.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES Write security: 3; Read security: 5 The MODULES menu provides status information and menu options that allow you to configure and control the installed option modules, as well as the network ports (see Figure 9). Figure 9. Modules Menu If you install a module in a slot, then want to install a different type of module in the slot, you must set this field to EMPTY before selecting another module type.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES > TYPE Write security: 3; Read security: 5 Displays the type of module actually installed in the slot or the type of module you plan to install in the slot. The ATLAS 830 controller automatically detects the type of module installed in each slot, and the TYPE field automatically defaults to the installed module type.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES > STATUS Read security: 5 Displays status information on the installed modules as follows: ONLINE The module is enabled and is responding to the system controller’s status polls. This is the normal response of the system. NO RESPONSE The module is enabled but is not responding to the system controller’s status polls. This response indicates a problem in the system or that the module is not properly installed.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (T1/PRI) > INFO > SERIAL NUMBER Read security: 5 Displays the module’s serial number. MODULES (T1/PRI) > INFO > BOARD REVISION Read security: 5 Displays the board revision of the module. MODULES (T1/PRI) > INFO > PLL STATUS Read security: 5 Indicates whether the module phase lock loop is locked to its specific source. MODULES (T1/PRI) > ALARM STATUS Read security: 5 Displays the current T1 alarm status.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (T1/PRI) > DS0 STATUS Read security: 5 The DS0 status indicates usage on a DS0 basis. These options are read-only: - Unallocated * Inactive + Signaling mismatch A Active B Channel D Active D Channel M Maintenance N Dedicated (nailed) O Off hook - originate (RBS) R Ringing (RBS); Restart (ISDN) W Waiting dial tone MODULES (T1/PRI) > DS0 ALARMS Read security: 5 Displays per-DS0 alarm status.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (T1/PRI) > PERFORMANCE CURRENT Write security:3; Read security: 5 The performance fields (either current, 15-minute total, or 24-hour total) provide status on key performance measures as specified in ANSI T1.403 and AT&T TR54016 for the T1/PRI port. Except for CLR, these fields are all read-only. The monitored parameters include the following: MODULES (T1/PRI) > PERFORMANCE CURRENT > PRT Displays the port number.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (T1/PRI) > PERFORMANCE CURRENT > PCV Path Code Violation. MODULES (T1/PRI) > PERFORMANCE CURRENT > LES Line Errored Second. MODULES (T1/PRI) > PERFORMANCE 15MIN Write security:3; Read security: 5 Stores the performance data for the previous 15-minute window. Refer to Modules (T1/PRI) > Performance Current for a detailed description of these fields.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (T1/PRI) > CONFIGURATION > TX YEL Write security: 3; Read security: 5 Controls the transmission of yellow alarms. Choose either ON or OFF. MODULES (T1/PRI) > CONFIGURATION > TX PRM Write security: 3; Read security: 5 Controls the sending of performance report messaging (PRM) data on the facility data link (FDL). The PRM data continues to be collected even if XMIT PRM is turned off (possible only with ESF format). Choose either ON or OFF.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (T1/PRI) > TEST > LOC LB Write security: 4; Read security: 5 Causes loopback on near-end (local) port (see Figure 10). The following options are available: LINE Metallic loopback PAYLD Payload loopback - framing and clocking are regenerated Quad T1/PRI NI CSU DS1 Payload Loopback Line Loopback Figure 10. Loopback Test Diagram MODULES (T1/PRI) > TEST > REMOTE LB Write security: 4; Read security: 5 Sends loopback code to remote CSU.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (T1/PRI) > TEST > PATTERN Write security: 4; Read security: 5 Test pattern to be transmitted out the port. The following options are available: ALL ONES Framed ones ALL ZEROS Framed zeros QRSS Pseudo-random pattern with suppression of excess zeros MODULES (T1/PRI) > TEST > QRSS/RLB RESULTS Write security: 3; Read security: 5 Displays current status of T1 tests including information regarding loopbacks and test patterns.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (E1/PRA) > INFO > PART NUMBER Read security: 5 Displays the part number of the Quad E1/PRA Option Module. MODULES (E1/PRA) > INFO > SERIAL NUMBER Read security: 5 Displays the module’s serial number. MODULES (E1/PRA) > INFO > BOARD REVISION Read security: 5 Displays the board revision of the module. MODULES (E1/PRA) > INFO > E1 FRAMER REVISION Read security: 5 Displays the E1 framer hardware revision.
ATLAS 830 System Manual Section 4, User Interface Guide LOS (Loss of Signal) No signal detected on port interface. AIS (Alarm Indication Signal) An upstream failure has been detected and all ones are being received. REM (Remote Frame Alarm) Loss of frame alarm being received from far end. REMMF (Remote Multi-Frame Alarm) Loss of multi-frame alarm being received from far end. MODULES (E1/PRA) > TS0 ALARMS Read security: 5 Displays per-TS0 alarm status.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (E1/PRA) > SIG STATUS (PORT 1-4) Read security: 5 Displays the state of the A/B/C/D signaling bits for the Quad E1/PRA Option Module. Dashes indicate TS0s where signaling is not being transferred by the ATLAS 830. MODULES (E1/PRA) > PERFORMANCE CURRENT Write security:5; Read security: 5 The performance fields (either current, 15-minute total, or 24-hour total) provide status on key performance measures as specified in G.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (E1/PRA) > PERFORMANCE CURRENT > LCV Line Code Violation. MODULES (E1/PRA) > PERFORMANCE CURRENT > PCV Path Code Violation. MODULES (E1/PRA) > PERFORMANCE CURRENT > LES Line Errored Second. MODULES (E1/PRA) > PERFORMANCE CURRENT > LOFC Loss of Frame Count is a count of seconds in which a valid framing pattern could not be obtained.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (E1/PRA) > CONFIGURATION > TS16 MF Write security: 3; Read security: 5 If enabled, the receiver requires MFAS word in TS16 to achieve sync (CAS signaling). The transmitter outputs MFAS word in TS16 (CCS signaling). MODULES (E1/PRA) > CONFIGURATION > CRC-4 Write security: 3; Read security: 5 Transmits the CRC-4 checksum bits in the outgoing E1 data stream, when enabled. Also, checks the received signal for errors.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (E1/PRA) > TEST > PRT Write security: 4; Read security: 5 Displays the port number. MODULES (E1/PRA) > TEST > LOC LB Write security: 4; Read security: 5 Causes loopback on near-end (local) port (see Figure 11). The following options are available: NONE No loopback active LINE Metallic loopback E1/PRA NI CSU Line Loopback Figure 11.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (E1/PRA) > TEST > INJ Write security: 4; Read security: 5 Injects errors into transmitted test pattern. Return receipt of the errors is displayed in the QRSS RESULTS field. MODULES MENU (QUAD NX56/64 OPTION MODULE) The ATLAS 830 system controller automatically detects the presence of the Quad Nx 56/64 Option Module when it is installed in the system (listed as V35NX).
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (V.35NX) > ALARM STATUS > ALARMS Read security: 5 Displays an alarm condition on the ATLAS 830 unit. SLIP A rate mismatch exists between the DTE clock and the network-side clock (as set by DS0 assignment). PLL The Nx port is not able to lock onto the clock provided by the network interface. ZERO The DTE is sending an excessive number of consecutive zeroes to the network interface.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (V.35NX) > DATA RATE Read security: 5 Displays the data rate at which each Nx port is currently operating. A port’s data rate is determined by the number of DS0s assigned to it and the rate per DS0 associated with the active maps. MODULES (V.35NX) > DATA RATE > PORT Operating port number. MODULES (V.35NX) > DATA RATE > RATE This read-only field displays the data rate for the selected port. MODULES (V.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (V.35NX) > INBAND STATS > RX OVERFLOW The number of times the Inband Rx buffer is overflowed. MODULES (V.35NX) > INBAND STATS > TX RESET The number of times the transmitter is reset. MODULES (V.35NX) > INBAND STATS > LINK VERIFY The number of Link Verify frames received from the far end. MODULES (V.35NX) > INBAND STATS > REMOTE FAIL The number of communication failures with the far end. MODULES (V.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (V.35NX) > CONFIGURATION > PRT Read security: 5 Displays the port number. MODULES (V.35NX) > CONFIGURATION > NAME Write security: 3; Read security: 5 Accepts any alpha-numeric name up to 17 characters long, to uniquely identify each port on the Quad V.35 Option Module. MODULES (V.35NX) > CONFIGURATION > CLK +/Write security: 3; Read security: 5 Controls the clock used by the ATLAS 830 to accept the transmit (TX) data from the DTE.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (V.35NX) > CONFIGURATION > DTR Write security: 3; Read security: 5 Determines whether the ATLAS 830 treats a connection as permanent (IGNORE) or connects only when Data Terminal Ready (DTR) is active (CONNECT ON DTR). Select either IGNORE or CONNECT ON DTR. MODULES (V.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (V.35NX) > DIAL > MODE Write security: 3; Read security: 5 Configures the dialing mode. The following options are available: PERSISTENT Redial whenever the call is cleared or if the call fails. ONE TIME Attempt the call only once. MODULES (V.35NX) > DIAL > DIAL Write security: 0; Read security: 0 Signals the Nx port to dial/clear the call. MODULES (V.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (V.35NX) > TEST > LOOPBACK STATUS Read security: 5 This read-only option indicates a port’s current loopback status by displaying any of the following status messages: NO LOOPBACK ACTIVE LOOPING UP REMOTE UNIT REMOTE UNIT LOOPED BACK LOOPING DOWN REMOTE UNIT REMOTE LOOP-UP FAILED PORT LOOPED FROM REMOTE SOURCE PORT LOOPBACK ACTIVE MODULES (V.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES MENU (USSI OPTION MODULE) The ATLAS 830 system controller automatically detects the presence of the Quad USSI Option Module when it is installed in the system (listed as USSI). To see the menus for the Quad USSI Option Module via the terminal menu, use the arrow keys to scroll to the MODULES menu and press to access the module choices.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (USSI) > ALARM STATUS > ALARMS Read security: 5 Displays an alarm condition on the ATLAS 830 unit. SLIP A rate mismatch exists between the DTE clock and the network-side clock (as set by DS0 assignment). PLL The USSI port is not able to lock onto the clock provided by the network interface. ZERO The DTE is sending an excessive number of consecutive zeroes to the network interface.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (USSI) > DATA RATE Read security: 5 Displays the data rate at which each USSI port is currently operating. A port’s data rate is determined by the number of DS0s assigned to it and the rate per DS0 associated with the active maps. MODULES (USSI) > DATA RATE > PORT Displays operating port. MODULES (USSI) > DATA RATE > RATE Displays the data rate of the selected port.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (USSI) > INBAND STATS > RX OVERFLOW The number of times the Inband Rx buffer is overflowed. MODULES (USSI) > INBAND STATS > TX RESET The number of times the transmitter is reset. MODULES (USSI) > INBAND STATS > LINK VERIFY The number of Link Verify frames received from the far end. MODULES (USSI) > INBAND STATS > REMOTE FAIL The number of communication failures with the far end.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (USSI) > CONFIGURATION > PRT Read security: 5 Displays the port number. MODULES (USSI) > CONFIGURATION > NAME Write security: 3; Read security: 5 Accepts any alpha-numeric name up to 16 characters long, to uniquely identify each port on the Quad USSI Option Module. MODULES (USSI) > CONFIGURATION > CLK +/Write security: 3; Read security: 5 Controls the clock used by the ATLAS 830 to accept the transmit (TX) data from the DTE.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (USSI) > CONFIGURATION > DTR Write security: 3; Read security: 5 Determines whether the ATLAS 830 treats a connection as permanent (IGNORE) or connects only when Data Terminal Ready (DTR) is active (CONNECT ON DTR). Select either IGNORE or CONNECT ON DTR.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (USSI) > DIAL > MODE Write security: 3; Read security: 5 Configures the dialing mode. The following options are available: PERSISTENT Redial whenever the call is cleared or if the call fails. ONE TIME Attempt the call only once. MODULES (USSI) > DIAL > DIAL Write security: 0; Read security: 0 Signals the USSI port to dial/clear the call.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (USSI) > TEST > LOOPBACK STATUS Read security: 5 This read-only option indicates a port’s current loopback status by displaying any of the following status messages: NO LOOPBACK ACTIVE LOOPING UP REMOTE UNIT REMOTE UNIT LOOPED BACK LOOPING DOWN REMOTE UNIT REMOTE LOOP-UP FAILED PORT LOOPED FROM REMOTE SOURCE PORT LOOPBACK ACTIVE MODULES (USSI) > TEST > 511 Write security: 4; Read security: 5 Controls the activation of the 511 test pattern
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (USSI) > DTE INTERFACE Write security: 5; Read security: 5 Configures the Quad USSI Module for the appropriate interface type. Select the parameters matching the interface cable being used. MODULES (USSI) > DTE INTERFACE > PRT Read security: 5 Displays the port number. MODULES (USSI) > DTE INTERFACE > DTE INTERFACE MODE Write security: 3; Read security: 5 Configures the Quad USSI Module interface type.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (OCTAL BRI U) > INFO > SERIAL NUMBER Read security: 5 Displays the serial number of the module. MODULES (OCTAL BRI U) > INFO > BOARD REVISION Read security: 5 Displays the board revision of the installed module. MODULES (OCTAL BRI U) > ALARMS Read security: 5 Displays the alarm status for the selected Octal BRI Option Module. MODULES (OCTAL BRI U) > ALARMS > PRT Read security: 5 Indicates the port number.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (OCTAL BRI U) > CHANNEL USAGE > CHA Read security: 5 (Channel) Displays the status of individual channels. The following symbols may display: - Unallocated channel . Inactive channel A Active B channel D Active D channel MODULES (OCTAL BRI U) > PERFORMANCE CURRENT Write security: 3; Read security: 5 The performance field provides status on key performance measures for each of the four Octal BRI U ports.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (OCTAL BRI U) > TEST Write security: 5; Read security: 5 These options initiate different types of tests and display test results. MODULES (OCTAL BRI U) > TEST > PRT Write security: 5; Read security: 5 Displays the port number. MODULES (OCTAL BRI U) > TEST > LOCAL LOOPBACK Write security: 4; Read security: 5 Activates a local loopback toward the U interface. The following options are available: NONE No active loopback.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (OCTAL BRI S/T) > INFO > PART NUMBER Read security: 5 Displays the part number of the module. (Read-only.) MODULES (OCTAL BRI S/T) > INFO > SERIAL NUMBER Read security: 5 Displays the serial number of the module. (Read-only.) MODULES (OCTAL BRI S/T) > INFO > BOARD REVISION Read security: 5 Displays the board revision of the installed module. (Read-only.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (OCTAL BRI S/T) > CHANNEL USAGE > CHA Write security: 5; Read security: 5 (Channel) Displays the status of individual channels. The following symbols may display: - Unallocated channel . Inactive channel A Active B channel D Active D channel MODULES (OCTAL BRI S/T) > CONFIGURATION Write security: 5; Read security: 5 Allows the user to personally identify each port with an appropriate name.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (OCTAL BRI S/T) > TEST > LOCAL LOOPBACK Write security: 4; Read security: 5 Activates a local loopback toward the S/T interface. The following options are available: NONE No active loopback. LOOPBACK B1 Loops the first B channel of the interface. LOOPBACK B2 Loops the second B channel of the interface. LOOPBACK B1 + B2 Loops both B channels of the interface. LOOPBACK 2B+D Loops the entire physical interface.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (DS3) > DS3 INFO > BOARD REVISION Read security: 5 Displays the board revision of the module. MODULES (DS3) > DS3 INFO > DS1 FRAMER REVISION Read security: 5 Displays the revision of the DS1 framer on the installed module. MODULES (DS3) > DS3 INFO > M13 REV Read security: 5 Displays the revision of the M13 mux on the installed module.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (DS3) > DS3 ALARM STATUS > RX FRAMING Indicates whether Rx framing is being used on the T3 circuit. An asterisk (*) indicates the presence of Rx framing and a dash (-) indicates no Rx framing present. MODULES (DS3) > DS3 PERFORMANCE CURRENT Write security:3; Read security: 5 The performance fields (either current, 15-minute total, or 24-hour total) provide status on key performance measures as specified in ANSI T1.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (DS3) > DS3 PERFORMANCE CURRENT > SES_P (Severely Errored Seconds - Path) An accumulation of seconds during which parity errors, severely errored frames, or AIS signal is received. MODULES (DS3) > DS3 PERFORMANCE CURRENT > UAS_P (Unavailable Seconds - Path) An accumulation of one-second intervals during which the DS3 path is unavailable; i.e., 10 contiguous SES_Ps.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (DS3) > DS3 CONFIGURATION > TX CLOCK Write security: 3; Read security: 5 Selects the source of the T3 transmit clock. The following options are available: RECOVERED The ATLAS 830 will derive transmit T3 timing from the receive T3. INTERNAL The ATLAS 830 will derive transmit T3 timing from the internal ±20 PPM crystal source. Every T3 connection should have one RECOVERED and one INTERNAL transmit clock.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (DS3) > DS3 TEST > REMOTE LB Write security: 3; Read security: 5 This field indicates if loopbacks initiated from remote sources are in effect and may be used to execute remote loopbacks on the far-end T3 equipment. The following options are available: NONE No remote loopbacks are activated DS3 LINE T3 line loopback active DS1 #1 ...
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (DS3) > DS1 DS0 ALARM Read security: 5 Displays per-DS0 alarm status for each T1 in the T3 circuit. These alarms usually indicate the failure to receive the protocol that has been configured for the DS0.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (DS3) > DS1 PERFORMANCE CURRENT > SEFS Severely Errored Frame Second is a second that contains four consecutive errored framing patterns. MODULES (DS3) > DS1 PERFORMANCE CURRENT > LOFC Loss of Frame Count is a count of seconds in which a valid framing pattern could not be obtained. MODULES (DS3) > DS1 PERFORMANCE CURRENT > CSS Controlled Slip Second.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (DS3) > DS1 CONFIGURATION > FRAME Write security: 2; Read security: 5 This field must be set to match the frame format of the circuit to which it is connected, available from the network supplier. Choose either D4 or ESF. MODULES (DS3) > DS1CONFIGURATION > TX YEL Write security: 3; Read security: 5 Controls the transmission of yellow alarms. Choose either ON or OFF.
ATLAS 830 System Manual Section 4, User Interface Guide T3 Module T1 Payload Loopback T1 Framer #1 T3 Line Loopback M13 Mux T3 Front End T3 Line T1 Framer #28 Figure 12. Network Loopback Tests MODULES (DS3) > DS1 TEST > REMOTE LB Write security: 4; Read security: 5 Sends loopback code to remote CSU.
Section 4, User Interface Guide ATLAS 830 System Manual displaying test pattern status, the display string is composed of pattern sync status and errored seconds. NONE No sync. LOS Sync has been lost. SYNC Pattern is synchronized. ES Number of seconds with at least one bit error. MODULES (DS3) > DS1 TEST > CLR Write security: 3; Read security: 5 Clears error counters on test pattern results menu.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (DS3 D&I) > DS3 INFO > DS1S DROPPED Read security: 5 Displays the number of T1 circuits configured for use in the ATLAS 830 system and not passed through to the drop and insert interface. MODULES (DS3 D&I) > DS3 INFO > DS1 FRAMER REVISION Read security: 5 Displays the revision of the DS1 framer on the installed module. MODULES (DS3 D&I) > DS3 INFO > M13 REV Read security: 5 Displays the revision of the M13 mux on the installed module.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (DS3 D&I) > DS3 ALARM STATUS Read security: 5 Displays the current alarm status of the primary and secondary T3 interfaces. MODULES (DS3 D&I) > DS3 ALARM STATUS > PRT Read security: 5 Indicates the port number. MODULES (DS3 D&I) > DS3 ALARM STATUS > ALARMS Read security: 5 Displays the alarm status for the T3 circuit. An asterisk (*) indicates the presence of an alarm and a dash (-) indicates no alarm.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (DS3 D&I) > DS3 PERFORMANCE CURRENT > ES_L (Errored Seconds - Line) Count of seconds containing excessive zeros, LOS, or BPVs, not due to line code substitutions. MODULES (DS3 D&I) > DS3 PERFORMANCE CURRENT > SES_L (Severely Errored Seconds - Line) Count of seconds containing excessive zeros, LOS, or BPVs, not due to line code substitutions above a predetermined threshold.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (DS3 D&I) > DS3 CONFIGURATION Write security:3; Read security: 5 Includes all of the configurable parameters pertaining to the primary and secondary T3 interfaces. MODULES (DS3 D&I) > DS3 CONFIGURATION > PRT Read security: 5 Displays the port number. MODULES (DS3 D&I) > DS3 CONFIGURATION > PORT NAME Write security: 3; Read security: 5 Enter any text up to 16 characters to uniquely identify the T3 port on the DS3 D&I Option Module.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (DS3 D&I) > DS3 TEST > PRT Read security: 5 Indicates the T3 port under test. MODULES (DS3 D&I) > DS3 TEST > LOOPBACK Write security: 3; Read security: 5 This field indicates the present loopback selected.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (DS3 D&I) > DS1 ALARM STATUS > ALARMS Read security: 5 Displays the alarm status for each of the 28 T1 circuits. An asterisk (*) indicates the presence of an alarm and a dash (-) indicates no alarm. The following alarms are monitored: RED Loss of Frame or Red Alarm. Received T1 cannot be frame-synchronized. A Red Alarm is indicated when the T1 has been out of frame for 2.5 seconds. YELLOW Remote Alarm Indication or Yellow Alarm.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (DS3 D&I) > DS1 DS0 ALARM Read security: 5 Displays per-DS0 alarm status for each T1 in the T3 circuit. These alarms usually indicate the failure to receive the protocol that has been configured for the DS0.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (DS3 D&I) > DS1 PERFORMANCE CURRENT > SES Severely Errored Second (SES) is a second with 320 or more error events OR one or more Out Of Frame events. MODULES (DS3 D&I) > DS1 PERFORMANCE CURRENT > SEFS Severely Errored Frame Second is a second that contains four consecutive errored framing patterns.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (DS3 D&I) > DS1 CONFIGURATION > PORT NAME Write security: 3; Read security: 5 Accepts any alpha-numeric name up to 16 characters long, to uniquely identify each T1 in the T3 circuit. MODULES (DS3 D&I) > DS1 CONFIGURATION > FRAME Write security: 2; Read security: 5 This field must be set to match the frame format of the circuit to which it is connected, available from the network supplier. Choose either D4 or ESF.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (DS3 D&I) > DS1 TEST > REMOTE LB Write security: 4; Read security: 5 Sends loopback code to remote CSU. The following options are available: AT&T INBAND LINE Works in ESF and D4 mode ANSI FDL LINE Requires ESF mode ANSI FDL PAYLOAD Requires ESF mode INBAND NIU Works in ESF and D4 mode MODULES (DS3 D&I) > DS1 TEST > PATTERN Write security: 4; Read security: 5 Test pattern to be transmitted out the port.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES MENU (VIDEO OPTION MODULE) The ATLAS 830 system controller automatically detects the presence of the Video Option Module when it is installed in the system. To see the menus for the Video Option Module via the terminal menu, use the arrow keys to scroll to the MODULES menu and press to access the module choices. Refer to the Video Option Module Quick Start Guide for a menu tree containing a complete listing of menus.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (VIDEO) > ALARM STATUS > ALARMS Write security: 5; Read security: 5 Displays an alarm condition on the DTE interface. SLIP A rate mismatch exists between the DTE clock and the network-side clock (as set by DS0 assignment). PLL The Video Module DTE port is not able to lock onto the clock provided by the network interface. ZERO The DTE is sending an excessive number of consecutive zeroes to the network interface.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (VIDEO) > DATA RATE Write security: 5; Read security: 5 Displays data rate at which each port is currently operating. MODULES (VIDEO) > DATA RATE > PORT Write security: 5; Read security: 5 Indicates port number. MODULES (VIDEO) > DATA RATE > RATE Write security: 5; Read security: 5 Displays the data rate at which each Video Module DTE port is currently operating.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (VIDEO) > CONFIGURATION > NAME Write security: 3; Read security: 5 Accepts any alpha-numeric name up to 16 characters long, to uniquely identify each DTE port on the Video Module. MODULES (VIDEO) > CONFIGURATION > CLK +/Write security: 3; Read security: 5 Controls the clock used by the ATLAS 830 to accept the transmit (TX) data from the DTE. This is usually set to NORMAL.
ATLAS 830 System Manual Section 4, User Interface Guide Table 2. DTR Descriptions DIAL METHOD (DIAL PLAN) DTR SETTING DESCRIPTION Dial on DTR Recognize DTR Call is dialed when DTR is high and disconnects when DTR goes low. Ignore DTR Call will never connect. Recognize DTR Call is dialed if DTR is already high and disconnected when DTR goes low. Ignore DTR Call is dialed regardless of DTR state and must be disconnected manually.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (VIDEO) > TEST > LOOPBACK Write security: 4; Read security: 5 The Video Module supports both local and remote loopbacks. The following options are available: NO LOOPBACK No active loopback. LOCAL LOOPBACK Activates both a local loopback (back toward the DTE) and a port loopback (toward the network). REMOTE LOOPBACK Initiates a local loopback request sent to the remote Video Module. This allows for end-to-end circuit test.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (VIDEO) > TEST > 511 RESULT Write security: 5; Read security: 5 Displays the results of the 511 test. This option is read-only. Clear these results by pressing when CLR is selected. NONE Pattern is not synchronized. LOS At one point the pattern was synchronized, but is currently not synchronized. SYNC Pattern is synchronized. ES Number of seconds with at least one bit error.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (VIDEO) > DTE INTERFACE > CURRENT DTE TYPE Write security: 5; Read security: 3 Displays the current configuration of the Video Module DTE Interface. MODULES MENU (NXT1 HSSI OPTION MODULE) The NxT1 HSSI/V.35 Module system controller automatically detects the presence of the NxT1 HSSI Option Module when it is installed in the system (listed as NXT1 HSSI).
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (NXT1HSSI) > IMUX MENUS Read Security: 5 Contains the inverse muxing configuration parameters for the NxT1 HSSI Option Module. MODULES (NXT1HSSI) > IMUX MENUS > CONFIG Read Security: 5; Write Security: 5 Contains parameters to include T1 data streams to the HSSI interface. MODULES (NXT1HSSI) > IMUX MENUS > CONFIG > PRT Indicates the port number. Displays the port number for the T1s mapped to the NxT1 HSSI interface.
Section 4, User Interface Guide ATLAS 830 System Manual Remote Line Loopback Local Line Loopback Local DTE Loopback NxT1 HSSI T1 Interfaces IMUX DTE Figure 13. HSSI Interface Loopback Test Diagram MODULES (NXT1HSSI) > HSSI MENUS > STATUS > LOCAL DTE LOOPBACK A local DTE loopback occurs at the DTE port of the DCE, and is used to test the link between the DTE and DCE (NxT1HSSI module).
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (NXT1HSSI) > HSSI MENUS > STATUS > TA Displays the status of the data Terminal equipment AVAILABLE signal. TA will be asserted by the DTE (independently of CA) when the DTE is prepared to both send and receive data to and from the DCE. Valid data transmission should not commence until CA has also been asserted by the DCE.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (NXT1HSSI) > HSSI MENUS > CONFIG > LC (Not applicable in V.35 mode.) Enables the Loopback Circuit C signal from the DCE. LC is an optional loopback request signal from the DCE to the DTE, requesting the DTE provide a loopback path to the DCE. MODULES MENU (OCTAL FXS OPTION MODULE) The ATLAS 830 system controller automatically detects the presence of the Octal FXS Option Module when it is installed in the system (listed as FXS-8).
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (FXS-8) > STATUS > STATUS Read security: 5 Displays the call status of each voice port. This field may display the following: INACTIVE The port is preconfigured, but the FXS module is not present. DISABLED The FXS module is present, but the port is not mapped. IDLE The FXS port is in an idle state for LS configurations, and tip is grounded in GS configurations. TIP-OPEN The FXS port tip conductor is high impedance.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (FXS-8) > TEST Write security: 4; Read security: 5 These options initiate different types of tests and display test results. MODULES (FXS-8) > TEST > PORT Write security: 5; Read security: 5 Displays the operating port. MODULES (FXS-8) > TEST > TEST 2W Write security: 4; Read security: 5 Activates 2W (FXS) tests on a per-port basis. Options include OFF, ACTIVE, TIP OPEN, REV. BATTERY, DISABLED, and RINGING.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (FXS-8) > TEST > 1KHZ TONE Write security: 3; Read security: 5 Sends a 1kHz tone into the following locations, based on test selection: NEAR sends the tone out the FXS port, while FAR sends the tone into the digital PCM stream of the ATLAS 830 controller. These tests are useful for verifying a voice path. MODULES (FXS-8) > TEST > LOOPBACK Write security: 3; Read security: 5 Activates loopback tests on a per-port basis.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (FXS-8) > CONFIG > TX GAIN Write security: 3; Read security: 5 Adjusts the (+)Gain and (-)Attenuation of a digital signal transmitted by the FXS into the digital PCM stream. The range includes +3 (loudest), 0, -3, and -6 dB (softest). When the digital signal is connected through the PSTN, a setting of -3 dB should be used. MODULES (FXS-8) > CONFIG > 2W IMPEDANCE Read security: 5 2-wire input impedance is set to 600 ohms +2.16 µF.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (VCOM) > INFO > FIRMWARE REVISION Read security: 5 Displays the current firmware revision of the selected module. MODULES (VCOM) > STATUS Read security: 5 Displays the status of each of the voice compression resources. MODULES (VCOM) > STATUS > DEVICE Read security: 5 Indicates the resource number of the packet voice device listed. On the ATLAS 830, packet voice devices are numbered 1-32.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (VCOM) > STATUS > ALGORITHM Read security: 5 Denotes the voice compression algorithm being used by the packet voice device. Any packet voice device can use any available compression algorithm. When ATLAS 830 chooses a packet voice device for a particular call, the voice compression algorithm is set to match the dial plan endpoint configuration. Refer to the Frame Relay menu section of this manual for more information.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (VCOM) > STATUS > FRAME TYPE Read security: 5 Displays the kind of frame the ATLAS 830 receives from the frame relay endpoint connected to the VCOM channel, allowing users to monitor the kind of data being carried on the network and processed by the ATLAS 830. (The ATLAS 830 interprets the most-recently received frame from the endpoint.) During a voice connection, the frame type displays as VOICE.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (VCOM) > CONFIG > CONFIGURE VCOM DEVICES > DEVICE Read security: 5 Indicates the resource number of the packet voice device listed. On the ATLAS 830, packet voice devices are numbered 1-32. MODULES (VCOM) > CONFIG > CONFIGURE VCOM DEVICES > STATE Write security: 4; Read security: 5 Controls the configuration state of the individual packet voice device. The ATLAS 830 determines the initial configuration state of each device.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (VCOM) > CONFIG > CURRENT FAX STATUS Write security: 5; Read security: 5 Enables or disables fax over packet capability using the voice compression module. MODULES (VCOM) > STATISTICS Write security: 4; Read security: 5 These options initiate different types of tests and display test results. MODULES (VCOM) > STATISTICS > DEVICE Read security: 5 Indicates the resource number of the packet voice device listed.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (VCOM) > STATISTICS > VCOM FRMS Write security: 4; Read security: 5 Counts every frame successfully sent to or received from the ATLAS 830 system controller. This is an indication of activity but does not indicate the actual amount of packet data exchanged.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (IMUX) > INFO Read security: 5 Provides information about the module part number, serial number and assembly revision. MODULES (IMUX) > INFO > PART NUMBER Read security: 5 Displays the part number of the module. MODULES (IMUX) > INFO > SERIAL NUMBER Read security: 5 Displays the serial number of the module. MODULES (IMUX) > INFO > BOARD REVISION Read security: 5 Displays the board revision of the installed module.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (IMUX) > STATUS > NUMBCHANNELS Read security: 5 Displays the number of bearer channels used in this BONDING session. When the number is displayed in the format X/Y, Y is the number of BONDING resources reserved for this session, and X is the number of calls belonging to this session that are up. If just a number is displayed, then all calls are up, and the number displayed is the number of BONDING resources in use for this session.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (IMUX) > CONFIGURATION > TANULL TIMER (SEC) Specifies the length of time the answering endpoint attempts to detect the BONDING negotiation pattern from the originating endpoint before deciding the BONDING call has failed. It may be necessary to shorten this timer if the DTE equipment using the BONDING module also has timer constraints for completing non-BONDING parameter negotiation.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (HDLC-128) > INFO > BOARD REVISION Read security: 5 Displays the board revision of the installed module. MODULES (HDLC-128) > STATUS Read security: 5 Displays the submenus for available resources on the HDLC Option Module. MODULES (HDLC-128) > STATUS > DS0S AVAILABLE Read security: 5 Displays the total number of DS0s currently available for allocation on the HDLC Option Module. The maximum value is 128.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (HDLC-128) > STATUS > CHANNELS > ERRORS Read security: 5 Displays the total number of errors received by the resource. Press on this field to view the number of Total Errors, CRC Errors, Aborted Frames, and Invalid Frames. MODULES (HDLC-128) > STATUS > CHANNELS > CLRCNTR Write security: 4; Read security: 5 Resets all counters for the resource channel.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (M56K-16) > STATUS > ANALOG RSRC SESSION STATUS Read security: 5 This submenu displays the session status information for the analog resources available on the Modem-16 Option Module. MODULES (M56K-16) > STATUS > ANALOG RSRC SESSION STATUS > RSRC Read security: 5 Indicates the resource number of the analog call resource. On the Modem-16 Option Module, analog resources are numbered 1-16 and digital ISDN resources are numbered 17-32.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (M56K-16) > STATUS > ANALOG RSRC SESSION STATUS > TX RATE Read security: 5 Displays the transmit bit rate of the analog resource for a currently active call. If the analog resource is not in use, this field will display N/A. MODULES (M56K-16) > STATUS > ANALOG RSRC SESSION STATUS > ERROR CORR Read security: 5 Displays the error correction mode being used by the analog resource for a currently active call.
Section 4, User Interface Guide ATLAS 830 System Manual SIGNAL TO NOISE RATIO (dB) Signal to noise ratio (in decibels) on the modem’s receive signal. RX MEAN SQUARE ERROR Mean square error of the received signal. ROUND TRIP DELAY (ms) Delay between the near and far end modem devices. RX LEVEL (-dBm) Displays the level of the signal (in -dBm) of the signal received by the resource. TX LEVEL (-dBm) Displays the level of the signal (in -dBm) of the signal transmitted by the resource.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (M56K-16) > STATUS > ANALOG RSRC CONNECTIONS STATS > RSRC Read security: 5 Indicates the resource number of the analog call resource. On the Modem-16 Option Module, analog resources are numbered 1-16 and digital ISDN resources are numbered 17-32. MODULES (M56K-16) > STATUS > ANALOG RSRC CONNECTIONS STATS > ATTEMPTS Read security: 5 Displays the number of connections attempted for this analog resource since the last reset.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (M56K-16) > STATUS > ANALOG RSRC I/O STATS > TX-BYTES Read security: 5 Displays the number of data bytes transmitted by the analog resource to the remote client modem during the current call. This parameter is reset once the call is disconnected. MODULES (M56K-16) > STATUS > ANALOG RSRC I/O STATS > RX-BYTES Read security: 5 Displays the number of data bytes received by the analog resource from the client modem during the current call.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (M56K-16) > STATUS > ANALOG RSRC I/O STATS > RESET STATS Write security: 5; Read security: 5 Resets the input and output statistics for the given analog resource. This option resets the transmit and receive statistics for the analog resource. MODULES (M56K-16) > STATUS > DIGITAL RSRC SESSION STATUS Write security: 5; Read security: 5 Displays the session status information for the digital resources available on the Modem-16 Option Module.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (M56K-16) > STATUS > DIGITAL RSRC CONNECTION STATS Write security: 5; Read security: 5 Displays the connection statistics for the digital resources available on the Modem-16 Option Module. MODULES (M56K-16) > STATUS > DIGITAL RSRC CONNECTION STATS > RSRC Read security: 5 Indicates the resource number of the digital call resource.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (M56K-16) > STATUS > DIGITAL RSRC I/O STATS > RSRC Read security: 5 Indicates the resource number of the digital call resource. On the Modem-16 Option Module, analog resources are numbered 1-16 and digital ISDN resources are numbered 17-32.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (M56K-16) > STATUS > DIGITAL RSRC I/O STATS > RESET STATS Write security: 5; Read security: 5 Resets the input and output statistics for the given analog resource. This option resets the transmit and receive statistics for the analog resource. MODULES (M56K-16) > CONFIGURATION Write security: 5; Read security: 5 Displays the configuration submenus available for both analog and digital resources available on the option module.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (M56K-16) > CONFIGURATION > ANALOG RSRC > OPERATION Write security: 3; Read security: 5 Selects the mode of operation for the particular analog call resource. The following selections are permissible: OPERATION MODE MEANING ENABLED Indicates the selected analog resource is available for use as an analog call resource in the system. DISABLED Indicates this resource is not available for use as an analog call resource in the system.
Section 4, User Interface Guide ATLAS 830 System Manual System resource usage for analog and digital call resources can be viewed under the SYSTEM STATUS menu of the ATLAS. This menu provides detailed resource availability information for each resource type, including hourly average available, minimum available, and number of times there were no available resources of a particular type.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (ASYNC232) > INFO > BOARD REVISION Read security: 5 Displays the board revision of the installed module. MODULES (ASYNC232) > INFO > FIRMWARE REVISION Read security: 5 Displays the revision of the coprocessor firmware on the installed module. MODULES (ASYNC232) > SIGNAL STATUS Read security: 5 Shows the status of key DTE interface signals. An asterisk (*) indicates the presence of a signal and a hyphen (-) indicates no signal present.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (ASYNC232) > I/O STATS > RX BYTES Read security: 5 Displays the number of bytes sent to the DTE. MODULES (ASYNC232) > I/O STATS > OVERRUNS Read security: 5 Displays the received overrun errors from the DTE. A receiver overrun occurs when the DTE performs data transmission too fast for the Async-232 port to keep up, therefore causing data to be lost. An overrun may indicate the need to turn on hardware flow control.
ATLAS 830 System Manual Section 4, User Interface Guide MODEM RING Incoming analog modem call is ringing on port. Async-232 port will toggle RI. MODEM ANSWER The DTE has answered an incoming analog modem call. MODEM DIAL The DTE is using the Async-232 port to make an outgoing analog modem call. MODEM CONNECTED An analog modem call has been established. ISDN PPP RING Incoming ISDN PPP call is ringing on the port. Async-232 port will toggle RI.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (ASYNC232) > CONFIGURATION > PRT Read security: 5 Displays the port number. MODULES (ASYNC232) > CONFIGURATION > PORT NAME Write security: 3; Read security: 5 Accepts any alpha-numeric name up to 16 characters long, to uniquely identify each port on the Async-232 Option Module. MODULES (ASYNC232) > CONFIGURATION > BIT RATE Write security: 3; Read security: 5 Configures the fixed DTE port bit rate.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (ASYNC232) > CONFIGURATION > CALL DIR Write security: 3; Read security: 5 Configures the Async-232 port to answer incoming calls and/or originate outgoing calls. The following options are available: IN ONLY, OUT ONLY, and IN & OUT. MODULES (ASYNC232) > CONFIGURATION > IN CTRL Write security: 3; Read security: 5 Selects the method by which incoming calls are indicated to and controlled by the DTE.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (ASYNC232) > CONFIGURATION > DIALOUT > DTR DIAL NUMBER This field is only active when outgoing calls are enabled and DIALOUT METHOD is set to DTR DIAL. If a phone number is entered here, it will be dialed when DTR goes active.
ATLAS 830 System Manual Section 4, User Interface Guide MODULES (ASYNC232) > CONFIGURATION > MODEM Write security: 3; Read security: 5 Configures an allocated modem for incoming and outgoing analog modem calls. Selected options are issued to the modem when it is allocated to answer an incoming call or initiate an outgoing call. Some options imply a negotiation with the remote modem. These modem options may also be specified through the AT command interface if enabled.
Section 4, User Interface Guide ATLAS 830 System Manual MODULES (ASYNC232) > CONFIGURATION > MODEM > ERROR CORRECTION Write security: 3; Read security: 5 Configures the error correction for the allocated modem. The following options are available: DISABLED No error correction is requested. If the remote modem refuses to support the option, the call is disconnected. Although no error correction is used, this mode still allows speed matching, data buffering, and flow control.
ATLAS 830 System Manual Section 4, User Interface Guide PACKET MANAGER The PACKET MANAGER submenus define and configure all layer 2 connections, including frame relay endpoints (Figure 14). These submenus include PACKET ENDPNTS, PACKET CNCTS, CNCTS SORT and FRAME RELAY IQ. Figure 14. Packet Manager Menu PACKET MANAGER > PACKET ENDPNTS Read security: 5 Defines, monitors, and tests a packet endpoint. Submenus include STATUS, PERFORMANCE, CONFIG, TEST, ENDPNT COUNT, and ENDPNTS SORT.
Section 4, User Interface Guide ATLAS 830 System Manual PACKET MANAGER > PACKET ENDPNTS > STATUS > PROTOCOL Read security: 5 Displays the layer 2 protocol for this packet endpoint. FR indicates this packet endpoint is configured for frame relay. TBOP indicates this packet endpoint is configured for Transparent Bit Oriented Protocol (TBOP). PPP indicates this packet endpoint is configured for the Point-to-Point Protocol.
ATLAS 830 System Manual Section 4, User Interface Guide PACKET MANAGER > PACKET ENDPNTS > STATUS > SIG STATE - PPP Read security: 5 Indicates the status of the PPP negotiation.The possible states are defined below. INITIAL This is the first state of LCP negotiation. If the packet endpoint is connected to a physical port in the DEDICATED MAP, this state will usually transition to the STARTING state to begin the PPP negotiation.
Section 4, User Interface Guide ATLAS 830 System Manual PACKET MANAGER > PACKET ENDPNTS > PERFORMANCE > ENDPNT NAME Read security: 5 Displays the packet endpoint name as defined in the PACKET ENDPNTS/CONFIG menu (see also Packet Manager > Packet Endpnts > Config > Endpnt Name on page 210). PACKET MANAGER > PACKET ENDPNTS > PERFORMANCE > PROT Read security: 5 Displays the layer 2 protocol for this packet endpoint. FR indicates this packet endpoint is configured for frame relay.
ATLAS 830 System Manual Section 4, User Interface Guide PACKET MANAGER > PACKET ENDPNTS > PERFORMANCE > LINK STATS - TBOP Write security: 3; Read security: 5 Displays layer 2 performance statistics. The statistics fields for TBOP reflect the total count since last cleared. The available statistic information is discussed below. TX PACKETS Total number of HDLC packets transmitted through this packet endpoint. RX PACKETS Total number of HDLC packets received through this packet endpoint.
Section 4, User Interface Guide ATLAS 830 System Manual TX PCKTS Total number of frame relay user data packets transmitted over this PVC. RX PCKTS Total number of frame relay user data packets received over this PVC. STATISTICS Provides additional information, as follows, on the individual sublink: RESET COUNTERS Resets all sublink counters. FECN COUNT Total number of FECN bits received on this PVC. BECN COUNT Total number of BECN bits received on this PVC.
ATLAS 830 System Manual Section 4, User Interface Guide PACKET MANAGER > PACKET ENDPNTS > CONFIG > CONFIG - FRAME RELAY Write security: 3; Read security: 5 Contains the configuration parameters for this packet endpoint. SIGNALING ROLE Displays the frame relay signaling role for this packet endpoint. The following options indicate the signaling role of this packet endpoint. OFF The remote device does not support frame relay signaling.
Section 4, User Interface Guide ATLAS 830 System Manual USER EVENT WINDOW SIZE (N393) Defines the number of poll events in each monitored window. For most applications, the USER POLL TIMER, USER POLLS PER STATUS, USER BAD EVENT THRESHOLD, and USER EVENT WINDOW SIZE configuration parameters should be left in the default state. Use caution when changing these parameters.
ATLAS 830 System Manual Section 4, User Interface Guide RX METHOD These are methods the ATLAS 830 uses to authenticate the peer. NONE is selected when you do not want to authenticate the peer. PAP, CHAP, or EAP is selected when you will allow the peer to be authenticated with one of the listed authentication protocols. In this case, the most secure method will be used first (EAP, then CHAP, then PAP).
Section 4, User Interface Guide ATLAS 830 System Manual MAX FAILURE Due to the nature of PPP, configuration options may not be agreed upon between two PPP peers. This value is the number of configuration-NAKs that should occur before an option is configuration-rejected. This allows a connection to succeed that might otherwise fail. The default value is 5. KEEPALIVE Configures the ATLAS 830 to send keepalive frames on PPP connections that are not currently in use for data.
ATLAS 830 System Manual Section 4, User Interface Guide DLCI STATE Controls how the state of this DLCI is reported to any packet connections within ATLAS 830 attempting to send or receive data on this DLCI. AUTO Passes the state as reported by the frame relay switch. Set DLCI STATE to AUTO for normal operation. FORCE ACTIVE This DLCI disregards the status as reported from the switch and reports Active to all packet endpoints within ATLAS 830.
Section 4, User Interface Guide ATLAS 830 System Manual ENABLE BACKUP SUPPORT Visible only if the sublink type is PRIMARY. YES displays the backup menus. No hides the backup menus. BACKUP PACKET ENDPT Visible only if ENABLE BACKUP SUPPORT is set to YES. Selects BACKUP PACKET ENDPT that contains the BACKUP SUBLINK to be tied to this sublink. BACKUP SUBLINK Visible only if ENABLE BACKUP SUPPORT is set to YES. Selects the BACKUP SUBLINK to be tied to this sublink.
ATLAS 830 System Manual Section 4, User Interface Guide PACKET MANAGER > PACKET ENDPNTS > CONFIG > USAGE Read security: 5 This field displays a 7-character summary of the references to this link. Each position is populated with a dash (-) or a character indicating the resource represented.
Section 4, User Interface Guide ATLAS 830 System Manual TEST Displays the test mode for the PVC. START The fixed duration that Test is not running and the DLCI is not configured for continuous in-band delay measurement. To change this option, set DIAGNOSTIC MODE to IN-BAND DELAY MEASUREMENT (also see Packet Manager > Packet Endpnts > Config > Sublinks Frame Relay, In-band Delay Measurement option).
ATLAS 830 System Manual Section 4, User Interface Guide PACKET MANAGER > PACKET ENDPNTS > ENDPTS SORT Write security: 3; Read security: 5 Provides sorting options for the packet endpoints. SORTING BY NAME sorts packet endpoints alphabetically by name. If you do not want to sort packet endpoints, set this option to OFF. PACKET MANAGER > PACKET CNCTS Write security: 3; Read security: 5 After packet endpoints are defined, they are connected in the packet connects (PACKET CNCTS) map.
Section 4, User Interface Guide ATLAS 830 System Manual PACKET MANAGER > PACKET CNCTS > CONFIG Write Security: 3; Read Security: 5 Determines data source and destination. The available options depend on the protocol selected. CONFLICT Indicates DLCI mismatch. FROM Indicates data source. TO Indicates data destination. PACKET MANAGER > CNCTS SORT Write Security: 3; Read Security: 5 Determines the order in which connections are displayed within PACKET CNCTS.
ATLAS 830 System Manual Section 4, User Interface Guide PACKET MANAGER > FRAME RELAY IQ > PORT ENABLE > SUBLINKS Identifies the PVC to be polled. Indicates the number of sublinks that ATLAS 830 will collect IQ data for within the given link. NAME Displays the user-designated name of the sublink (up to 15 characters). DLCI Displays the Data Link Connection Identifier (circuit number). ENABLE Indicates collection of IQ data for the target DLCI.
Section 4, User Interface Guide ATLAS 830 System Manual Descriptions of the statistics available in the INTERVAL or DAY submenus follow: 222 RX FRAMES The number of frames the port received for the interval or day. RX BYTES The number of bytes the port received for the interval or day. MAX RX THRU The maximum throughput the port received for the interval or day. AVG RX THRU The average throughput the port received for the interval or day.
ATLAS 830 System Manual Section 4, User Interface Guide RX FRAMES The number of frames the port received for the interval or day. CRC ERROR The number of frames received with CRC errors. OCTET ALIGN The number of frames received with a bit count not divisible by eight. LENGTH ERROR The number of frames received that are less than 5 bytes or greater than 4500 bytes. EA VIOLATION The number of frames received with errors in the EA field of the frame relay header.
Section 4, User Interface Guide 224 ATLAS 830 System Manual RX FRAMES The number of frames the PVC received for the interval or day. RX FECN The number of FECNs the PVC has received for the interval or day. TX FECN The number of FECNs the PVC has transmitted for the interval or day. RX BECN The number of BECNs the PVC has received for the interval or day. TX BECN The number of BECNs the PVC has transmitted for the interval or day.
ATLAS 830 System Manual Section 4, User Interface Guide RX FRAMES The number of frames the PVC received for the interval or day. MAX FRAME DLY The maximum delay in milliseconds on the PVC for the interval or day. Applies only if IN-BAND DELAY MEASUREMENT is ENABLED (see Packet Manager > Packet Endpnts > Config > Sublinks - Frame Relay on page 214, the IN-BAND DELAY MEASUREMENT option) for the PVC or if PVC diagnostics are being performed.
Section 4, User Interface Guide ATLAS 830 System Manual ROUTER The ATLAS 830 router uses the integral 10/100BaseT Ethernet port to transmit local area network (LAN) traffic over the wide area network (WAN) to a remote LAN. By integrating the router into the network access device, you benefit from the cost savings of not requiring an external router. To view the menu options for the Router, see Figure 15. All routing functions within the ATLAS are configured and monitored from the ROUTER menu. Figure 15.
ATLAS 830 System Manual Section 4, User Interface Guide ROUTER > IP > STATIC ROUTES > GATEWAY Write Security: 2; Read Security: 2 Defines the IP address of the router to receive the forwarded IP packet. ROUTER > IP > STATIC ROUTES > INTERFACE Write Security: 2; Read Security: 2 Defines the interface to which IP packets with this address will be routed. These are either Ethernet or frame relay DLCIs.
Section 4, User Interface Guide ATLAS 830 System Manual ROUTER > IP > ARP CACHE > TIME Read Security: 2 Displays the minutes since the entry was last referenced. ROUTER > IP > ARP CACHE > TYPE Read Security: 2 Defines this entry as DYNAMIC or STATIC. ROUTER > IP > ARP CACHE > INTERFACE Read Security: 2 Displays the interface upon which this entry was found. ROUTER > IP > ARP CACHE > TX PENDING Read Security: 2 Displays the number of transmit packets pending a reply.
ATLAS 830 System Manual Section 4, User Interface Guide ROUTER > IP > ROUTES > INTERFACE Read Security: 2 Displays the next-hop router or host interface through which IP packets are routed, as defined here: LOCAL Forwards the packet directly to the ATLAS router. EN0 IP Forwards the packet through the ATLAS Ethernet port. ENDPOINT NAME Forwards the packet using the DLCI number. ROUTER > IP > ROUTES > USED Read Security: 2 Displays the number of times the router has referenced this route.
Section 4, User Interface Guide ATLAS 830 System Manual ROUTER > IP > ROUTES > TTL Read Security: 2 Displays the number of seconds until the address is removed from table. A value of 999 means the route is static. ROUTER > IP > INTERFACES Write Security: 2; Read Security: 2 The INTERFACES menu configures and monitors all interfaces connected to the ATLAS router. These include the Ethernet and frame relay DLCIs connected in the PACKET MANAGER/ PACKET CNCTS.
ATLAS 830 System Manual Section 4, User Interface Guide ROUTER > IP > INTERFACES > FAR-END ADDRESS Write Security: 2; Read Security: 2 This menu is only present for frame-relay network interfaces, and it is only selectable when IARP is disabled. Use this menu to specify the IP address of the device on the other end of the virtual circuit. If that IP address is non-zero, a static route to the far-end network will be added using the interface SUBNET-MASK. If 0.0.0.
Section 4, User Interface Guide ATLAS 830 System Manual METHOD Defines the method used to send RIP route advertisements. The options are listed below: NONE All routes in the router table are advertised through this interface with no modification of the routing metric. SPLIT HORIZON Only advertises routes not learned through this interface. POISON REVERSE All routes are advertised, but the routes learned through this interface are “poisoned” with an infinite route metric.
ATLAS 830 System Manual Section 4, User Interface Guide ROUTER > IP > GLOBAL Write security: 2; Read security: 2 Provides a way to configure various settings for the Ethernet port. The following menus are available for review and editing: ROUTER > IP > GLOBAL > DEFAULT GATEWAY Write Security: 2; Read Security: 2 Defines or changes the default gateway. Enter the default gateway address by entering a decimal number into the appropriate field and then pressing to move to the next field.
Section 4, User Interface Guide ATLAS 830 System Manual ROUTER > IP > PING > SIZE Write Security: 2; Read Security: 2 Specifies the size in bytes of the data portion of the ping request. The default value is 64 bytes, and the maximum size is 1024 bytes. ROUTER > IP > PING > TIMEOUT Write Security: 2; Read Security: 2 Specifies the time in milliseconds to wait for the ping reply before timing out. The default timeout is three seconds, and the maximum timeout value is ten seconds.
ATLAS 830 System Manual Section 4, User Interface Guide ROUTER > IP > TELNET CLIENT > ADDRESS Write security: 2; Read security: 2 Defines the IP address assigned to the remote unit you are trying to connect to. ROUTER > IP > TELNET CLIENT > ESCAPE CHAR Write security: 2; Read security: 2 Defines the Telnet client escape character. Typing the combination characters will close the active telnet session to the remote unit specified in the ADDRESS field.
Section 4, User Interface Guide ATLAS 830 System Manual Table 4. IP Statistics NAME DESCRIPTION FORWARDING The indication of whether this ATLAS 830 is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this ATLAS 830. IP gateways forward datagrams; hosts do not (except those Source-Routed via the host).
ATLAS 830 System Manual Section 4, User Interface Guide Table 4. IP Statistics (Continued) NAME DESCRIPTION OUTDISCARDS The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in FORWDATAGRAMS if any such packets met this (discretionary) discard criterion.
Section 4, User Interface Guide ATLAS 830 System Manual Table 5. ICMP Statistics (Continued) NAME DESCRIPTION INERRORS The number of ICMP messages which the ATLAS 830 received but determined as having errors (bad ICMP checksums, bad length, etc.) INDESTUNREACHS The number of ICMP Destination Unreachable messages received. INTIMEEXCDS The number of ICMP Time Exceeded messages received. INPARMPROBS The number of ICMP Parameter Problem messages received.
ATLAS 830 System Manual Section 4, User Interface Guide Table 5. ICMP Statistics (Continued) NAME DESCRIPTION OUTTIMESTAMPS The number of ICMP Timestamp (request) messages sent. OUTTIMESTAMPREPS The number of ICMP Timestamp Reply messages sent. OUTADDRMASKS The number of ICMP Address Mask Request messages sent. OUTADDRMASKREPS The number of ICMP Address Mask Reply messages sent. CLEAR Clears the accumulated statistics. Table 6.
Section 4, User Interface Guide ATLAS 830 System Manual Table 6. TCP Statistics (Continued) NAME DESCRIPTION ESTABRESETS The number of times TCP connections have made a direct transition to the CLOSED state from either the ESTABLISHED state or the CLOSE-WAIT state. CURRESTAB The number of TCP connections for which the current state is either ESTABLISHED or CLOSE-WAIT. INSEGS The total number of segments received, including those received in error.
ATLAS 830 System Manual Section 4, User Interface Guide Table 8. IP Fast Cache Statistics NAME DESCRIPTION HITS Total number of times the ATLAS 830 went into the Fast Cache and successfully retrieved an IP address. MISSES Total number of times the ATLAS 830 went into the Fast Cache and failed to retrieve an IP address. CLEAR Clears the accumulated statistics.
Section 4, User Interface Guide ATLAS 830 System Manual IP Write Security: 2; Read security: 2 Defines the IP address of the server that receives the relay packet. UDP PORTS 1 - 3 Write Security: 2; Read security: 2 Specifies the UDP ports to relay. These fields are active only when ENABLE is set to SPECIFIED. 242 © 2002 ADTRAN, Inc.
ATLAS 830 System Manual Section 4, User Interface Guide DEDICATED MAPS The DEDICATED MAPS menu assigns dedicated connections between any two ports in the ATLAS 830. This section describes the DEDICATED MAPS menu items (see Figure 16). These options are module-dependent; that is, the menu items available depend on the module selected. Figure 16. Dedicated Maps Menu DEDICATED MAPS > ACTIVATE MAP Write security: 3; Read security: 5 Activates a dedicated map—automatically or manually.
Section 4, User Interface Guide ATLAS 830 System Manual DEDICATED MAPS > CREATE/EDIT MAPS Write security: 3; Read security: 5 Creates new maps and defines settings, as well as edits existing maps. To add a new map, position the cursor in the index column and press . ATLAS 830 automatically names the maps in the sequence in which they are created. You can change the names with MAP NAME. DEDICATED MAPS > CREATE/EDIT MAPS > # Displays the index number of the available maps.
ATLAS 830 System Manual Section 4, User Interface Guide DEDICATED MAPS > CREATE/EDIT MAPS > CONNECTS > PORT Write security: 3; Read security: 5 Specifies the port to use for the FROM connection. When you select this option, a list of ports and module types appears. Select the appropriate port and module type, and press . DEDICATED MAPS > CREATE/EDIT MAPS > CONNECTS > TO SLOT/SERVICE Write security: 3; Read security: 5 Specifies the slot to use for the second end of a connection.
Section 4, User Interface Guide ATLAS 830 System Manual DEDICATED MAPS > CREATE/EDIT MAPS > ACTIVATE TIME Write security: 3; Read security: 5 Sets the time when the map becomes active if you have selected AUTO in the ACTIVATE MAP field. Enter this time in hh:mm:ss 24-hour format. DEDICATED MAPS > CREATE/EDIT MAPS > ENBL DAY Security level: 3; Read security: 5 Specifies which days of the week the map is active.
ATLAS 830 System Manual Section 4, User Interface Guide DS0 RATE Sets the DS0 rate to either 56 or 64 kbps. This field is only valid for T1 ports mapped to a PKT ENDPNT. T1 TRUNK CONDITIONING SERVICE Sets known values in the signaling bits and the data field for outgoing DS0s which are cross-connected to a T1 port experiencing alarms. The trunk conditioning process consists of a 2.
Section 4, User Interface Guide ATLAS 830 System Manual DEDICATED MAPS (E1/PRA) > CREATE/EDIT MAPS > CONNECTS > TO/FROM CONFIG Write security: 3; Read security: 5 Specifies the configuration for the TO/FROM connection. The following selections may apply to the Quad E1/PRA Option Module, depending on the application: TS0 SELECTION Defines TS0s for an E1 port. Use this field to define the TS0s for this connection. You can enter the TS0s in several ways.
ATLAS 830 System Manual Section 4, User Interface Guide DEDICATED MAPS (V35NX) DEDICATED MAPS (V35NX) > CREATE/EDIT MAPS > CONNECTS Write security: 3; Read security: 5 Enters the dedicated map connections. Press to activate the submenus. DEDICATED MAPS (V35NX) > CREATE/EDIT MAPS > CONNECTS > TO/FROM CONFIG Write security: 3; Read security: 5 Specifies the configuration for the FROM connection.
Section 4, User Interface Guide ATLAS 830 System Manual DEDICATED MAPS (DS3 AND DS3 D&I) > CREATE/EDIT MAPS > CONNECTS > TO/FROM CONFIG Write security: 3; Read security: 5 Specifies the configuration for the TO/FROM connection. The following selections may apply to the T3 or T3 with Drop and Insert Option Module, depending on the application: DS0 SELECTION Defines DS0s for a specific T1 in the T3 circuit. Use this field to define the DS0s for this connection. You can enter the DS0s in several ways.
ATLAS 830 System Manual Section 4, User Interface Guide T1 TRUNK CONDITIONING STATE Defines the final fault signaling state. IDLE Used for one-way trunks; that is, for outgoing or incoming calls only – not both. SEIZED Used for two-way trunks. Prevents connected equipment from attempting to use a failed trunk for an outgoing call. T1 FAULT SIGNALING Displays the final fault signaling state of the AB bits. This field is read-only unless CUSTOM is chosen for the T1 TRUNK CONDITIONING SERVICE option.
Section 4, User Interface Guide ATLAS 830 System Manual DS0S AVAILABLE Indicates which DS0s of the T1 are assigned. DS0 assignment is based on the following items: DIGIT 0-9 This DS0 is available. The digit that displays in this field represents the last digit of the DS0 number. * This DS0 has been requested for this connection, but the DS0 is not yet activated for this port. ! This DS0 is used by this port in this connection and is currently activated.
ATLAS 830 System Manual Section 4, User Interface Guide DEDICATED MAPS (FXS-8) > CREATE/EDIT MAPS > CONNECTS > TO/FROM CONFIG Write security: 3; Read security: 5 Specifies the configuration for the TO/FROM connection. The following selections may apply to the Octal FXS Option Module, depending on the application: # PORTS Defines ports to be used for this connection. PORTS AVAILABLE Indicates which ports of the module are assigned.
Section 4, User Interface Guide ATLAS 830 System Manual E&M CONVERSION Configures the selected voice port for E&M signaling conversion. By enabling this option, other selections become available that are E&M trunk specific. This option is sometimes referred to as TANDEM conversion. The following submenu items become visible when E&M CONVERSION is ENABLED: E&M SUPERVISION Configures the E&M trunk as either Immediate start or Wink start. This configuration is for the Rx and Tx direction.
ATLAS 830 System Manual Section 4, User Interface Guide DEDICATED MAPS (PKT ENDPT) DEDICATED MAPS (PKT ENDPT) > CREATE/EDIT MAPS > CONNECTS Write security: 3; Read security: 5 To assign a packet endpoint to a physical port, select the port in the FROM SLOT/PORT field and configure the TO SLOT/PORT as follows: DEDICATED MAPS (PKT ENDPT) > CREATE/EDIT MAPS > CONNECTS > TO SLOT/SERVICE Write security: 3; Read security: 5 Select PKT ENDPNT to activate a list of available packet endpoints in the TO PORT fie
Section 4, User Interface Guide ATLAS 830 System Manual DEDICATED MAPS (PKT VOICE) > CREATE/EDIT MAPS > CONNECTS > TO/FROM CONFIG Write security: 3; Read security: 5 Specifies the configuration for the TO/FROM connection. The following selections apply to the PKT VOICE connections: 256 DLCI Press and select the appropriate DLCI from the drop-down list. VOICE PORT Identifies the voice port address of the remote unit. Express units support ports 1 and 2.
ATLAS 830 System Manual Section 4, User Interface Guide CIRCUIT STATUS The CIRCUIT STATUS menu allows the user to view the status of all circuits configured for dedicated circuit backup (see Figure 17). Figure 17. Circuit Status Menu CIRCUIT STATUS > FROM Read security: 5 Indicates the slot, port, and name of the endpoint configured for backup. CIRCUIT STATUS > MAN (MANUAL BACKUP) Write security: 3; Read security: 5 This activator forces a link in/out of backup.
Section 4, User Interface Guide ATLAS 830 System Manual CIRCUIT STATUS > BKUP STATUS (BACKUP STATUS) Read security: 5 The displayed string indicates the current status of the dedicated line. The following selections are available for the BACKUP STATUS menu item. FB Backup was forced through the interface menu. FR Restore was forced through the interface menu. PRIMARY The link is active. DIALING Attempting to dial the backup link. BACKUP FAILED Exceeded MAX NUM REDIALS.
ATLAS 830 System Manual Section 4, User Interface Guide CIRCUIT STATUS > TEST Write security: 1; Read security: 5 Contains a test activator and test status displays for dedicated dial backup circuits. CIRCUIT STATUS > TEST > LAST RUN TIME Read security: 5 Displays the date and time of the last test call made through this dedicated dial backup circuit. (Not seen until circuit is tested.
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN The DIAL PLAN submenus set global ATLAS 830 switch parameters as well as individual parameters for each ATLAS 830 port handling a switched call (see Figure 18). The individual ports are separated into two port types: network and user. Network ports terminate a connection from the network. User ports terminate incoming calls and, in turn may be connected to user equipment. Figure 18.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN > NETWORK TERM > PORT/PEP Write security: 3; Read security: 5 Selects the ATLAS 830 port or packet endpoint that terminates a network connection. There may be more than one “endpoint” associated with a particular port. If a T1 is connected to the PSTN, some DS0s may be used for long distance, while others are used for local calls. These would constitute two “endpoints” (trunks) over a single physical port.
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN > NETWORK TERM > OUT#ACCEPT > ACCEPT NUMBER Write security: 3; Read security: 5 Designates which numbers this endpoint passes on toward the network. The accept list may consist of multiple entries. The numbers are defined using the following “wild cards”: X = Any single digit N = Any single digit 2 through 9 $ = Any number of digits of any value 9 = This specific number [1,2,3...
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN > NETWORK TERM > OUT#ACCEPT > DATA 64K, DATA 56K, AUDIO, SPEECH Reflects the bearer capability the network has provisioned for this line. If the ISDN lines were purchased with different services provisioned, then ATLAS 830 would send the call out of the port which supports the type of service the call requires.
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN > NETWORK TERM > IFCE CONFIG Write security: 3; Read security: 5 Specifies the configuration parameters for the endpoint. The selections displayed in this field are based on the type of module selected in the SLOT/SVC option. For detailed information on submenus for a particular module type, please refer to the dial plan interface configuration menu discussion for the appropriate network, option, or resource module.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN > NETWORK TERM > SUBST TEMPL > SUBSTITUTED# Designates the number to be substituted for the number(s) defined in the ORIGINAL# field. The pattern can be a specific number, or wildcards can be used as a part of the number specification. X = Any single digit N = Any single digit 2 through 9 $ = Any number of digits of any value 9 = This specific number [1,2,3...
Section 4, User Interface Guide ATLAS 830 System Manual There may be more than one “endpoint” associated with a particular port. If a T1 is connected to the PSTN, some DS0s may be used for long distance, while others are used for local calls. These would constitute two “endpoints” (trunks) over a single physical port. DIAL PLAN > USER TERM > SIG Write security: 3; Read security: 5 Defines the type of signaling being used for this connection (endpoint).
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN > USER TERM > IN#ACCEPT > ACCEPT NUMBER Designates which numbers this endpoint will accept (terminate) from the network. The accept list may consist of multiple entries. The numbers are defined using the following wildcards: X = Any single digit N = Any single digit 2 through 9 $ = Any number of digits of any value 9 = This specific number [1,2,3...
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN > USER TERM > IN#ACCEPT > TREAT CALL AS Allows the incoming call to be treated as the selected call type, regardless of the actual incoming call type. The default selection, AS RECEIVED, effectively disables the feature by using the actual call type. Other options include DATA 64K and DATA 56K.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN > USER TERM > SUBST TEMPL The substitution template allows the ATLAS 830 to select calls (based on telephone number) and substitute a user-defined number for the received digits after the call has been processed by the switchboard. Substitution templates are created for each entry in the Dial Plan. DIAL PLAN > USER TERM > SUBST TEMPL > ORIGINAL# Designates the number(s) to be the search criteria for the substitution template.
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN > GLOBAL PARAM Write security: 2; Read security: 5 Sets ATLAS 830 options which apply to all switched operations, both incoming and outgoing calls. DIAL PLAN > GLOBAL PARAM > END OF NUMBER TIMEOUT Write security: 3; Read security: 5 Sets the length of time ATLAS 830 waits before assuming the outgoing dialed number is complete. The default value is six seconds.
ATLAS 830 System Manual Section 4, User Interface Guide The ATLAS 830 default templates should cover all applications and should not need to be added to by the user except for very rare circumstances. DIAL PLAN > GLOBAL PARAM > NUMBER TYPE TEMPLATES > # Denotes an entry number. The maximum number of entries is 50. Press to insert a new entry and to delete any entry. DIAL PLAN > GLOBAL PARAM > NUMBER TYPE TEMPLATES > PREFIX Sets the prefix for the number type.
Section 4, User Interface Guide ATLAS 830 System Manual Use extreme caution when forcing COLLISION RESPONSE. DIAL PLAN > GLOBAL PARAM > GLOBAL TONE TYPE Write security: 1; Read security: 5 Specifies the dialing digit tone encoding to be used throughout the entire system. DTMF (dual-tone-multi frequency) and MF (multi frequency) are the available options.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (DS3 AND DS3 D&I) > NETWORK TERM (PRI) > IFCE CONFIG (PRI) > OUTGOING NUMBER CONVERSION Converts outgoing (towards the network) numbers to the selected numbering plan and type option. AS DIALED Sends the digits provided as an unknown number type. ISDN-NATIONAL Regardless of what type of number is received, the outgoing number is substituted with ISDN-National as the number plan and type. Ten digits are always sent to the network.
Section 4, User Interface Guide ATLAS 830 System Manual STRIP MSD does not affect CALL ACCEPT criteria. All of the digits (including the MSDs that are subsequently stripped) are used as accept criterion. DIAL PLAN (DS3 AND DS3 D&I) > NETWORK TERM (PRI) > IFCE CONFIG (PRI) > NETWORK SPECIFIC FACILITY VOICE AND DATA Enables the sending of appropriate information to the PSTN. The default for this option is NORMAL, and in this case no Network Specific Facility Information Element is sent.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (DS3 AND DS3 D&I) > NETWORK TERM (PRI) > IFCE CONFIG (PRI) > OUTGOING CALLER ID Defines the number to use to provide Caller ID to the network for outgoing calls sent through this endpoint. Choose from SEND AS PROVIDED, SUBSTITUTE IF NOT PRESENT, or SUBSTITUTE ALWAYS. The Caller ID number must be specific (i.e., no wildcards).
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN (DS3 AND DS3 D&I) > NETWORK TERM (PRI) > IFCE CONFIG (PRI) > B CHANNEL SELECTION Determines how the ATLAS 830 switchboard uses B channels for call routing. The Circular method can be used for call load balancing among the available B channels on this interface. NORMAL Always start with the last channel configured (i.e., for a full PRI channel 23 would be used if available). CIRCULAR Contiguous channels from last to first.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (DS3 AND DS3 D&I) > NETWORK TERM (RBS) > IFCE CONFIG (RBS) > DS0S AVAILABLE Indicates which DS0s of the T1 have been defined in this switched endpoint (indicated by “! “), in another switched endpoint (indicated by “s”), or in a DEDICATED MAP (indicated by “n”). This field is read-only. The following characters may display in this field: 0-9 This DS0 is available.
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN (DS3 AND DS3 D&I) > NETWORK TERM (RBS) > IFCE CONFIG (RBS) > FGD RX SEQUENCE Displayed only if SIGNALING METHOD is configured for FEATURE GROUP D. Defines to the ATLAS 830 the format in which to receive the incoming digits. Choices: NORMAL if no digits are to be received; ANI/DNIS to receive both ANI and DNIS; DNIS to receive DNIS only; ANI to receive ANI only.
ATLAS 830 System Manual Section 4, User Interface Guide The trunk number must be specific (i.e., no wildcards). Example: To connect an incoming DS0 (trunk) to an endpoint with the accept number of 963-8615, set the trunk number to 963-8615. DIAL PLAN (DS3 AND DS3 D&I) > NETWORK TERM (RBS) > IFCE CONFIG (RBS) > STRIP MSD Strips a selected quantity (choose from NONE, 1, 2, and 3) of the most significant digits (MSD) of a dialed number prior to being forwarded out of the port.
Section 4, User Interface Guide ATLAS 830 System Manual Example: The unit receives an incoming call on DS0 17. The switchboard looks for an interface who has matching accept criteria to the number it received. A match is found on interface “Z” that has DS0 ALIGNMENT enabled. This causes interface “Z” to only process the call if it has DS0 17 available.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (DS3 AND DS3 D&I) > NETWORK TERM (NFAS) > IFCE CONFIG (NFAS) > FIRST DS0 Defines the first DS0 for this endpoint.The ATLAS 830 uses DS0s, starting with this selection, to send and receive calls to and from the network. The outgoing calls which are allowed or restricted over these DS0s are set by OUT#ACCEPT (see Dial Plan > Network Term > Out#Accept on page 261) and OUT#REJECT (see Dial Plan > Network Term > Out#Rej on page 263).
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN (DS3 AND DS3 D&I) > NETWORK TERM (NFAS) > IFCE CONFIG (NFAS) > STRIP MSD Strips a selected quantity (choose from NONE, 1, 2, and 3) of the most significant digits (MSD) of a dialed number prior to being forwarded out of the port. Example: A network port could be set to accept all calls beginning with 9 (9$), and then with STRIP MSD set to 1, all digits would be sent toward the network except the leading 9.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (DS3 AND DS3 D&I) > NETWORK TERM (NFAS) > IFCE CONFIG (NFAS) > CALLED DIGITS TRANSFERRED Some PRI switches may be provisioned to send only a portion of the called number (like DID). This menu item allows the ATLAS 830 to know how many digits to expect (choose from NONE, THREE, FOUR, SEVEN, and ALL). The default is ALL and would almost always be correct.
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN (DS3 AND DS3 D&I) > NETWORK TERM (NFAS) > IFCE CONFIG (NFAS) > SWAP ANI/DNIS Swaps the ANI and DNIS numbers received from the network. ANI (Automatic Number Identification) is the billing number of the calling party, and DNIS (Dialed Number Identification Service) is the called party number. With this swap, the ATLAS 830 switchboard uses ANI to route the call. The accept number in the dial plan must use the ANI number, not the DNIS number.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (DS3 AND DS3 D&I) > USER TERM (PRI) > IFCE CONFIG (PRI) > SWITCH TYPE Defines the type of PRI switch that the ATLAS 830 emulates. If connected to another ATLAS 830, both need to be set to the same switch type. The following options are available: • • • • Lucent 5E Northern DMS 100 National ISDN AT&T 4ESS DIAL PLAN (DS3 AND DS3 D&I) > USER TERM (PRI) > IFCE CONFIG (PRI) > FIRST DS0 Defines to the ATLAS 830 the first DS0 for this endpoint.
Section 4, User Interface Guide ATLAS 830 System Manual The list below indicates services that may be subscribed to from the PSTN. These services require that specific information (such as a Network Specific Facility Information Element) be sent to the network during call setup.
ATLAS 830 System Manual Section 4, User Interface Guide switched to Port 2 of that same module. Assign a unique SOURCE ID (e.g., 7) to Port 1 of the module, and then configure Port 2 to only accept calls from that unique SOURCE ID (7). DIAL PLAN (DS3 AND DS3 D&I) > USER TERM (PRI) > IFCE CONFIG (PRI) > SWAP ANI/DNIS Swaps the ANI and DNIS numbers received from the network.
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN (DS3 AND DS3 D&I) > USER TERM (RBS) > IFCE CONFIG (RBS) > FIRST DS0 Defines the first DS0 for this endpoint.The ATLAS 830 uses DS0s, starting with this selection, to send and receive calls to and from the network. The outgoing calls which are allowed or restricted over these DS0s are set by OUT#ACCEPT (see page 181) and OUT#REJECT (see page 183).
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (DS3 AND DS3 D&I) > USER TERM (RBS) > IFCE CONFIG (RBS) > FGD TX SEQUENCE Displayed only if SIGNALING METHOD is configured for FEATURE GROUP D. Defines the format in which to present the outgoing digits. Choices: NORMAL if no digits are to be sent; ANI/DNIS to send both ANI and DNIS; DNIS to send DNIS only; ANI to send ANI only.
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN (DS3 AND DS3 D&I) > USER TERM (RBS) > IFCE CONFIG (RBS) > CALLER ID NUMBER Defines the number the ATLAS 830 uses to provide caller ID to the network for outgoing calls sent through this endpoint. This item is optional. The Caller ID number must be specific (i.e., no wildcards).
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (DS3 AND DS3 D&I) > USER TERM (RBS) > IFCE CONFIG (RBS) > DS0 ALIGNMENT DS0 ALIGNMENT is typically enabled when a user needs the ability to maintain alignment between T1s as if they were in dedicated map mode. This scenario requires DS0 ALIGNMENT enabled on both interfaces (usually on User Term and on Net Term).
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN (DS3 AND DS3 D&I) > USER TERM (NFAS) > IFCE CONFIG (NFAS) > SWITCH TYPE Defines the type of PRI switch to which the port is connected. If connected to another ATLAS 830, both need to be set to the same switch type.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (DS3 AND DS3 D&I) > USER TERM (NFAS) > IFCE CONFIG (NFAS) > NETWORK SPECIFIC FACILITY VOICE AND DATA Enables the sending of appropriate information to the PSTN. The default for this option is NORMAL, and in this case no Network Specific Facility Information Element is sent. Unless one of the services listed below is subscribed to, the selection should remain set to NORMAL.
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN (DS3 AND DS3 D&I) > USER TERM (NFAS) > IFCE CONFIG (NFAS) > SOURCE ID Simplifies the creation of a dial plan in applications where the criterion for switching calls to a certain endpoint is a function of which endpoint originated the call. DEFAULT VALUE = 0. Zero is the default ID for all endpoints and all accept numbers. With default values, all calls are routed based only on the dialed number.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (E1/PRA) DIAL PLAN (E1/PRA) > NETWORK TERM (PRA) This menu allows the user to define option parameters for ports which terminate a PRA connection from the network. DIAL PLAN (E1/PRA) > NETWORK TERM (PRA) > IFCE CONFIG (PRA) Write security: 3; Read security: 5 Specifies the configuration parameters for the endpoint.
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN (E1/PRA) > NETWORK TERM (PRA) > IFCE CONFIG (PRA) > CALLED DIGITS TRANSFERRED Some PRI switches may be provisioned to send only a portion of the called number (like DID). This menu item allows the ATLAS 830 to know how many digits to expect (choose from NONE, THREE, FOUR, SEVEN, and ALL). The default is ALL and would almost always be correct.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (E1/PRA) > NETWORK TERM (PRA) > IFCE CONFIG (PRA) > B CHANNEL SELECTION Determines how the ATLAS 830 switchboard uses B channels for call routing. The Circular method can be used for call load balancing among the available B channels on this interface. NORMAL Always start with the last channel configured (i.e., for a full PRI channel 23 would be used if available). CIRCULAR Contiguous channels from last to first.
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN (E1/PRA) > USER TERM (PRA) > IFCE CONFIG (PRA) > NETWORK SPECIFIC FACILITY VOICE AND DATA Enables the sending of appropriate information to the PSTN. Currently not supported for E1/PRA use. DIAL PLAN (E1/PRA) > USER TERM (PRA) > IFCE CONFIG (PRA) > CALLED DIGITS TRANSFERRED Defines the number of digits to forward from the called number.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (E1/PRA) > USER TERM (PRA) > IFCE CONFIG (PRA) > B CHANNEL SELECTION Determines how the ATLAS 830 switchboard uses B channels for call routing. The Circular method can be used for call load balancing among the available B channels on this interface. NORMAL Always start with the last channel configured (i.e., for a full PRI channel 23 would be used if available). CIRCULAR Contiguous channels from last to first.
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN (V35NX) > USER TERM > IFCE CONFIG > CALL TYPE Configures the call type (either 56K or 64K) used for outgoing calls from this endpoint. DIAL PLAN (V35NX) > USER TERM > IFCE CONFIG > DIAL CALL AS Allows the outgoing call to be treated as the selected call type. Options include DIGITAL (for 56K or 64K data calls), VOICE (for speech calls), and AUDIO (for 3.1kHz audio calls).
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (USSI) > USER TERM > IFCE CONFIG > PORTS AVAILABLE Indicates which ports of the selected Quad USSI Option Module have been defined in this switched endpoint (indicated by “!”), in another switched endpoint (indicated by “s”), or in a DEDICATED MAP (indicated by “n”). This field is read-only. The following characters may display in this field: 0-4 This port is available.
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN (USSI) > USER TERM > IFCE CONFIG > MIN DS0’S Set this to 1 for typical single-call connections. Setting this greater than 1 will restrict connections to endpoints supporting aggregation (e.g., BONDING) of the specified number of DS0s. DIAL PLAN (USSI) > USER TERM > IFCE CONFIG > MAX DS0’S Set this to 1 for typical single-call connections. Setting this greater than 1 will accommodate connections to endpoints supporting aggregation (e.g.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (U-BRI) > NETWORK TERM > IFCE CONFIG > STRIP MSD Strips a selected quantity (choose from NONE, 1, 2, and 3) of the most significant digits (MSD) of a dialed number prior to being forwarded out of the port. Example: A network port could be set to accept all calls beginning with 9 (9$), and then with STRIP MSD set to 1, all digits would be sent toward the network except the leading 9. STRIP MSD does not affect CALL ACCEPT criteria.
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN (U-BRI) > USER TERM > IFCE CONFIG > SWITCH TYPE Defines the type of BRI switch the ATLAS 830 emulates. If connected to another ATLAS 830, both need to be set to the same switch type.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (U-BRI) > USER TERM > IFCE CONFIG > SOURCE ID Simplifies the creation of a dial plan in applications where the criterion for switching calls to a certain endpoint is a function of which endpoint originated the call. DEFAULT VALUE = 0. Zero is the default ID for all endpoints and all accept numbers. With default values, all calls are routed based only on the dialed number. Multiple endpoints can have the same SOURCE ID.
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN (S/T BRI) > USER TERMINATION > IFCE CONFIG > SWITCH TYPE Write security: 2; Read security: 5 Defines the type of ISDN switch that the port will simulate. If connected to another ATLAS, both need to be set to the same type.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (FXS-8) > USER TERM > IFCE CONFIG > PORTS AVAILABLE Indicates which ports of the Octal E&M Option Module have been defined in this switched endpoint (indicated by “! “), in another switched endpoint (indicated by “s”), or in a DEDICATED MAP (indicated by “n”). This field is read-only. The following characters may display in this field: 0-9 This port is available.
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN (FXS-8) > USER TERM > IFCE CONFIG > DID DIGITS TRANSFERRED Defines the number of digits sent to ATLAS 830 from the network if DID is used. This option only displays if DID is set to ENABLED. DIAL PLAN (FXS-8) > USER TERM > IFCE CONFIG > CALLER ID NUMBER Defines the number the ATLAS 830 uses to provide caller ID to the network for outgoing calls sent through this endpoint. This item is optional. The Caller ID number must be specific (i.e.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (FXS-8) > USER TERM > IFCE CONFIG > ANI TO CALLER ID Use this option to generate (FSK) Caller ID out the FXS user term port to the subscriber. The ATLAS 830 generates Caller ID from the calling party number (typically when the call is terminated from a PRI). The calling party number may also come from a Trunk Number on a network term entry, or from the Caller ID field on a user term entry (if the call comes from one of these sources).
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN (ASYNC232) > USER TERM > IFCE CONFIG > SOURCE ID Simplifies the creation of a dial plan in applications where the criterion for switching calls to a certain endpoint is a function of which endpoint originated the call. DEFAULT VALUE = 0. Zero is the default ID for all endpoints and all accept numbers. With default values, all calls are routed based only on the dialed number. Multiple endpoints can have the same SOURCE ID.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (PKT ENDPT) > USER TERM > IFCE CONFIG > RETRY COUNT Defines the number of redials to attempt. DIAL PLAN (PKT ENDPT) > USER TERM > IFCE CONFIG > OUTGOING CALLER ID Defines the presentation of the calling party number for this endpoint.
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN (PKT ENDPT) > USER TERM > IFCE CONFIG > SUPPORT DBU HANDSHAKE DBU HANDSHAKE must be disabled for DBU between two ATLAS products. This option is only available when the packet endpoint selected in the PORT/PEP field has backup sublinks. SUPPORT DBU HANDSHAKE enables/disables the generation and acceptance of ADTRAN frame relay handshake upon connection.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (CKT BACKUP) > USER TERM > IFCE CONFIG > ORIGINATE/ANSWER The following selections are available for the ORIGINATE/ANSWER menu item: ORIGINATE The endpoint will originate the backup call. ANSWER The endpoint will answer any incoming calls, but will only go into backup if an error is detected. ANSWER ANY The endpoint will answer any incoming calls and go immediately into backup.
Section 4, User Interface Guide ATLAS 830 System Manual NET FAIL DBU is initiated when there is a network failure. Possible causes include LOS, RED, Yellow, or Blue alarms. MANUAL The ATLAS will never initiate DBU until it is manually set to do so. DIAL PLAN (CKT BACKUP) > USER TERM > IFCE CONFIG > RESTORE CRITERIA This only applies to originating endpoints. These are criteria for automatically coming out of backup.
ATLAS 830 System Manual DAYS ENABLED Section 4, User Interface Guide Use this record to enable/disable backup monitoring on particular days of the week. DIAL PLAN (CKT BACKUP) > USER TERM > IFCE CONFIG > TEST CALL This only applies to originating endpoints. Use this menu to schedule regularly occurring test calls. The following selections are available for the TEST CALL menu item.
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN (PKT VOICE) > NETWORK TERM > IFCE CONFIG > VOICE COMPRESSION Selects the voice compression algorithm used by this endpoint. ADTRAN FSU 5622 and Express 5200 Series FRADs use CCITT G.723.1 compression at 6.3 kbps. The Express 5200 Series FRADs also support the proprietary NETCODER algorithm at 6.4 kbps. Both endpoints must agree about the compression algorithm choice.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (PKT VOICE) > NETWORK TERM > IFCE CONFIG > STRIP MSD Strips a selected quantity (choose from NONE, 1, 2, and 3) of the most significant digits (MSD) of a dialed number prior to being forwarded out of the port. Example: A network port could be set to accept all calls beginning with 9 (9$), and then with STRIP MSD set to 1, all digits would be sent toward the network except the leading 9. STRIP MSD does not affect CALL ACCEPT criteria.
Section 4, User Interface Guide ATLAS 830 System Manual DIAL PLAN (PKT VOICE) > USER TERM > IFCE CONFIG > VOICE COMPRESSION Selects the voice compression algorithm used by this endpoint. ADTRAN FSU 5622 and Express 5200 Series FRADs use CCITT G.723.1 compression at 6.3 kbps. The Express 5200 Series FRADs also support the proprietary NETCODER Algorithm at 6.4 kbps. Both endpoints must agree about the compression algorithm choice.
ATLAS 830 System Manual Section 4, User Interface Guide DIAL PLAN (PKT VOICE) > USER TERM > IFCE CONFIG > SOURCE ID Simplifies the creation of a dial plan in applications where the criterion for switching calls to a certain endpoint is a function of which endpoint originated the call. DEFAULT VALUE = 0. The default ID for all endpoints is 0 and all accept numbers is 0. With default values, all calls are routed based only on the dialed number. Multiple endpoints can have the same SOURCE ID.
Section 4, User Interface Guide 320 ATLAS 830 System Manual © 2002 ADTRAN, Inc.
DETAIL LEVEL PROCEDURES DLP-001 Connecting the Terminal or PC to the ADMIN or CRAFT Port ...........................................323 DLP-002 Logging in to the System .....................................................................................................325 DLP-003 Setting IP Parameters for the ATLAS 830 ..........................................................................329 DLP-004 Verifying Communications Over an IP LAN .........................................................
Section 5, DLP-Index 322 ATLAS 830 System Manual © 2002 ADTRAN, Inc.
CONNECTING THE TERMINAL OR PC TO THE ADMIN OR CRAFT PORT Introduction ATLAS 830 shelf management and provisioning is facilitated by a series of intuitive menus that are accessible on a computer screen. Connecting either a VT100 terminal or a PC emulating a VT100 terminal to the ADMIN port on the rear of the unit or the CRAFT interface on the unit faceplate allows access to the menus and management features of ATLAS 830. This section specifies how to connect the VT100 terminal or PC to the ATLAS 830.
Section 5, DLP-001 ATLAS 830 System Manual DLP-001 Perform Steps Below in the Order Listed 1. Connect a VT100 terminal to ATLAS 830. • Set the parameters of the VT100 terminal to: – 9600 baud rate – 8 data bits – No parity – 1 stop bit – No flow control • If the terminal has a parallel setting, disable it and use serial port. • Plug the DB-9 male end of the data cable into the ATLAS 830. Make the connection to the VT100 terminal as appropriate for your equipment. 2.
LOGGING IN TO THE SYSTEM Introduction Once connected to the ATLAS 830 via either a VT100 terminal or PC configured as a VT100 terminal, it is necessary to login to the system to gain access to the management and provisioning functions. This DLP provides specific steps for logging in to the system and accessing the various management and provisioning functions. You can also connect to the unit through Telnet if the IP has been provisioned (see DLP-003).
Section 5, DLP-002 ATLAS 830 System Manual DLP-002 Perform Steps Below in the Order Listed 1. After connecting to the system, a blank screen will appear. Pressing any key will display the login screen shown below. The cursor will blink at the LOGIN field, waiting for a password to be entered. 2. At the LOGIN field, enter the password for the ATLAS 830. The manufacturer’s default password for the ATLAS 830 system is “password” in lowercase letters.
ATLAS 830 System Manual Section 5, DLP-002 3. Upon entering the correct password, the ATLAS 830 MAIN MENU is displayed as shown below. 4. You are now logged in to the ATLAS menu system. You can also connect to the unit via Telnet if the IP parameters have been provisioned as discussed in DLP-003. Follow-up Procedures Once this procedure is complete, return to the procedure which referred you to this DLP and continue with the tasks indicated there. 61200780L1-1A © 2002 ADTRAN, Inc.
Section 5, DLP-002 328 ATLAS 830 System Manual © 2002 ADTRAN, Inc.
SETTING IP PARAMETERS FOR THE ATLAS 830 Introduction If the ATLAS 830 is connected to an IP network for Telnet, TFTP, or SNMP management, there are several IP parameters that must be set in order for the unit to communicate with the network. These parameters are described in this DLP along with the procedures for setting them. Please see your Network Administrator for the proper assignment of the following parameters: IP address, Subnet Mask, and Default Gateway.
Section 5, DLP-003 ATLAS 830 System Manual DLP-003 Perform Steps Below in the Order Listed 1. Connect the ATLAS 830 unit to your VT100 system (details found in DLP-001). 2. Login to the system with maximum rights (details for logging in are in DLP-002). 3. From the SYSTEM CONFIG menu, select the ETHERNET PORT option and press . The next three steps will require confirmation after each change. 4. From the SYSTEM CONFIG/ETHERNET menu, select the IP ADDRESS option and press .
VERIFYING COMMUNICATIONS OVER AN IP LAN Introduction When an Ethernet Port is connected to a local area network (LAN), test steps must be performed on the ATLAS 830 to ensure that the unit is communicating properly over the network. This procedure outlines those steps. Prerequisite Procedures Before beginning this procedure, the unit should be physically connected to the LAN and the provisioning tasks detailed in DLP-003 should be complete.
Section 5, DLP-004 ATLAS 830 System Manual DLP-004 Perform Steps Below in the Order Listed 1. Ascertain the ATLAS 830 IP address. If you do not already have the IP Address for the ATLAS 830, either obtain it from the Network Administrator or manually check for the address in the SYSTEM CONFIG/ETHERNET PORT/IP ADDRESS menu of the Network Management interface. You must login with maximum rights to modify the IP parameters on the ATLAS 830. 2. Ping the ATLAS 830 unit from a remote computer on the network.
ATLAS 830 System Manual Section 5, DLP-004 3. Telnet to the ATLAS 830. From the same computer used in the previous step, Telnet to the ATLAS 830 and verify that the Telnet session is properly opened (see DLP-002 for logging in to a system and establishing a Telnet session.) Once the Telnet session is established, press to logout and close the session. Refer to the documentation of the computer system if you are unsure how to perform a Telnet.
Section 5, DLP-004 334 ATLAS 830 System Manual © 2002 ADTRAN, Inc.
ADDING/REMOVING USERS AND CHANGING PASSWORD SECURITY LEVELS Introduction All menu items in the ATLAS 830 are protected by passwords of varying security levels. By assigning different passwords to different security levels, the ATLAS 830 System Administrator can control which users can view or change various menu items. You can assign multiple passwords at the same access level. This way, different users with the same access privileges can have different passwords.
Section 5, DLP-005 ATLAS 830 System Manual DLP-005 Perform Steps Below in the Order Listed 1. Connect to the ATLAS 830 using either the 10/100 BASET, ADMIN, or CRAFT interfaces. If you are not already connected to the unit’s ADMIN or CRAFT interfaces (either with a VT100 compatible terminal or with a PC running VT100 emulation software), follow the procedure in DLP-001.
ATLAS 830 System Manual Section 5, DLP-005 Follow-up Procedures Once this procedure is complete, return to the procedure which referred you to this DLP and continue with the tasks indicated there. 61200780L1-1A © 2002 ADTRAN, Inc.
Section 5, DLP-005 338 ATLAS 830 System Manual © 2002 ADTRAN, Inc.
UPDATING THE FIRMWARE OF AN ATLAS 830 USING TFTP Introduction The ATLAS 830 supports firmware updates via the 10/100 BASET Ethernet port using either TFTP from a network server or the ADMIN or CRAFT interfaces using XMODEM. This DLP provides the steps to follow for a successful firmware upgrade using the 10/100 BASET ethernet port and a TFTP Server.
Section 5, DLP-006 ATLAS 830 System Manual DLP-006 Perform Steps Below in the Order Listed 1. Connect to the ATLAS 830 using the 10/100 BASET interface. If you are not already connected to the unit’s ETHERNET port using Telnet client software, use the procedure in DLP-003 to connect to the unit. 2. Login to the unit. Login to the unit using the read-write password (see DLP-002 for details). 3. Go to the SYSTEM UTILITY menu and select the UPDATE FIRMWARE menu; press . 4.
ATLAS 830 System Manual Section 5, DLP-006 During the TFTP upload process, various status messages display in CURRENT UPDATE STATUS to indicate progress. The following table describes these messages. Message Meaning Contacting Server Indicates communication with the TFTP network server is trying to be established with the specified server address in the TFTP SERVER IP ADDRESS field.
Section 5, DLP-006 342 ATLAS 830 System Manual © 2002 ADTRAN, Inc.
UPDATING THE FIRMWARE OF AN ATLAS 830 USING XMODEM Introduction The ATLAS 830 supports firmware updates via the ETHERNET port using either TFTP from a network server or the ADMIN or CRAFT interfaces using XMODEM. This procedure outlines the steps for a successful firmware upgrade using the ADMIN or CRAFT interfaces and XMODEM software.
Section 5, DLP-007 ATLAS 830 System Manual DLP-007 Perform Steps Below in the Order Listed 1. Connect to the ATLAS 830 using the DB-9 ADMIN or CRAFT interface. If you are not already connected to the shelf’s ADMIN or CRAFT interface (either with a VT100 compatible terminal or with a PC running VT100 emulation software), follow the procedure in DLP-001. Connecting to the ADMIN or CRAFT interface limits the upgrade procedure to XMODEM Only. 2. Login to the unit.
ATLAS 830 System Manual Section 5, DLP-007 Because XMODEM data is being transferred in-band through the menu interface, the VT100 menus of the ATLAS 830 will be inoperable from the ADMIN or CRAFT interfaces. You can cancel the update at any time within the terminal emulation software. (Please consult the documentation provided by the terminal emulation software to determine how to do this.) 10.
Section 5, DLP-007 346 ATLAS 830 System Manual © 2002 ADTRAN, Inc.
SAVING THE CURRENT CONFIGURATION USING TFTP Introduction The ATLAS 830 supports configuration transfers from the unit (via the 10/100 BASET Ethernet port) to a TFTP server located on the network. This DLP provides the steps to follow for a successful configuration transfer using the 10/100 BASET Ethernet port and a TFTP Server.
Section 5, DLP-008 ATLAS 830 System Manual DLP-008 Perform Steps Below in the Order Listed 1. Connect to the ATLAS 830 using the 10/100 BASET interface. Telnet to the unit. The procedures in DLP-003 must be completed prior to the Telnet login. 2. Login to the unit. Login to the unit using the read-write password (see DLP-002 for details). 3. Go to the SYSTEM UTILITY menu and select the CONFIGURATION TRANSFER menu; press . 4.
ATLAS 830 System Manual Section 5, DLP-008 Follow-up Procedures Once this procedure is complete, return to the procedure which referred you to this DLP and continue with the tasks indicated there. 61200780L1-1A © 2002 ADTRAN, Inc.
Section 5, DLP-008 350 ATLAS 830 System Manual © 2002 ADTRAN, Inc.
CONNECTING THE ATLAS 830 TO AN EXTERNAL MODEM Introduction The ATLAS 830 can be accessed and managed via modem, allowing the same capabilities to the user as if connected to the local ADMIN port. Access is provided by a female DB-9 connector, labeled ADMIN, located on the back of the unit. Prerequisite Procedures The ATLAS 830 should be mounted in its permanent location before connecting to an external modem.
Section 5, DLP-009 ATLAS 830 System Manual DLP-009 Perform Steps Below in the Order Listed 1. Mount the modem in its permanent position. 2. Connect power to the modem using manufacturer instructions. 3.
ATLAS 830 System Manual Section 5, DLP-009 The Admin port may be configured via Telnet or the Craft port. 11. From the CHAIN PORT menus, select the PORT TYPE menu and select DIAL. If you are connected to the ATLAS 830 using the ADMIN interface, changing the PORT TYPE mode to DIAL will terminate your session. You MUST have Ethernet access to the ATLAS 830 to change the PORT TYPE back to DIRECT and restore your terminal session.
Section 5, DLP-009 354 ATLAS 830 System Manual © 2002 ADTRAN, Inc.
USING THE ADTRAN UTILITY SYSLOG WITH THE ATLAS 830 Introduction The ATLAS 830 Event Log is used to log various message types at settable threshold levels. The Event Log is a useful tool for troubleshooting switchboard (or call connection) activities including the viewing of digits received, digits transferred, and ISDN Messages. The Event Log can maintain the most recent 350 lines of data in a first in/first out buffer.
Section 5, DLP-010 ATLAS 830 System Manual DLP-010 Setting Up the ATLAS 830 to use the Syslog 1. Login to the system with maximum rights (details for login in are in DLP-002). Once you have logged in to the ATLAS 830, go to SYSTEM CONFIG/SYSLOG SETUP.
ATLAS 830 System Manual Section 5, DLP-010 Additional Syslog Features • The MONITOR feature allows all Syslog messages to be pre-filtered by SYSTEM NAME, SOURCE, SLOT, and PORT before displaying these messages to the user and logging the message to the predesignated monitor log file. Various filter options may be defined by selecting SOURCE. The figure below shows the SOURCE FILTER window. When the MONITOR button is selected, the file will be logged to LOCAL8.TXT.
Section 5, DLP-010 ATLAS 830 System Manual • The PROPERTIES menu allows the user to specify what types of messages will be logged to an ASCII text file. Mark the lowest priority Event Log message you want to log to the Syslog server text file. For example, the figure below shows that all messages will be logged to the text file. • The HELP menu also explains these features. Click on HELP/CONTENTS/SYSLOG HOST DAEMON for further explanation of Syslog features. 358 © 2002 ADTRAN, Inc.
CONNECTING THE ALARM CONTACTS Introduction This DLP explains how to connect the alarm contacts on the ATLAS 830. Prerequisite Procedures Before making alarm connections, the unit should be mounted in its permanent location. Tools and Materials Required • • • Wire strippers Small, straight slot screwdriver 22 or 24 AWG 2-conductor twisted pair cross connect wire To prevent electrical shock, do not install equipment in a wet location or during a lightning storm.
Section 5, DLP-011 ATLAS 830 System Manual DLP-011 Connect Alarm Relay Contacts 1. For the alarm relay contacts labeled ALARM on the rear of the ATLAS 830 as shown in Figure 1, determine whether the external alarm reporting device uses normally open (NO) or normally closed (NC) relay contacts to sense an alarm condition. 2. Using standard Telco cross connect wire or equivalent, determine and cut the length required to reach from the alarm header to the alarm-reporting device(s). 3.
USING THE ALARM CONNECTIONS AND ACO BUTTON Introduction The alarm connections alert the user when a selected alarm condition exists. The alarm may be cleared by pressing the Alarm Cut-Off (ACO) switch located on the front panel of the ATLAS 830. This procedure details the steps which must be performed to use the ATLAS 830 alarm connections and ACO switch. This procedure should be performed at installation on each ATLAS 830 shelf that is wired out to external office alarm equipment.
Section 5, DLP-012 ATLAS 830 System Manual DLP-012 Perform Steps Below in the Order Listed To Begin 1. Connect to the ATLAS 830 using either the 10/100 BASET, ADMIN, or CRAFT interfaces. If you are not already connected to the unit’s ADMIN or CRAFT interfaces (either with a VT100 compatible terminal or with a PC running VT100 emulation software), use the procedure in DLP-001 to connect to the ADMIN or CRAFT interface.
SYSTEM EVENT LOGGING The ATLAS 830 Event Log is used to log various message types at settable threshold levels. This section describes the entries that may be logged by the system Event Log.The Event Log CATEGORY threshold is particularly important – this is the minimum severity level that an event must have associated with it in order that the event be logged. Use caution when changing CATEGORY values from their default levels.
Section 6, System Event Logging 1. ATLAS 830 System Manual SETTING THE EVENT LOG CATEGORY The following steps outline the procedure for setting up the event CATEGORY thresholds for the Event Log. 1. From the MAIN MENU, go to the SYSTEM CONFIG menu and press the right arrow key to enter the right-pane menus. Untitled Screenshot 2. Select the EVENT LOGGING field and press . Once in the EVENT LOGGING menus, press the right arrow key to access the right-pane menus.
ATLAS 830 System Manual Section 6, System Event Logging 3. Refer to the tables in this section to determine the desired CATEGORY thresholds. 4. To change the CATEGORY, select the appropriate field and press . This will provide a list of available options. Highlight the desired threshold and press to select it. Use caution when changing CATEGORY values from their default levels.
Section 6, System Event Logging 2. ATLAS 830 System Manual VIEWING THE EVENTS The following steps outline the procedure for viewing EVENT LOG messages. 1. From the MAIN MENU, go to the SYSTEM STATUS menu and press the right arrow key to enter the right-pane menus. 2. Select the EVENT LOG field and press . Once in the EVENT LOG, press the right arrow key to access the actual messages. 366 © 2002 ADTRAN, Inc.
ATLAS 830 System Manual Section 6, System Event Logging The EVENT LOG messages are stored in a first-in/first-out table. Therefore, the most recent log entry is found at the top of the log. EVENT LOG messages may be sent to an external Syslog server for storage. Refer to DLP-010, “Using the ADTRAN Utility Syslog with the ATLAS 830,” for more details. 3. SYSTEM EVENTS Table 1 through Table 8 provides a listing of ATLAS system events.
Section 6, System Event Logging ATLAS 830 System Manual Table 1. System Controller Events (Continued) Console Log String Category Event Timing source changed to Backup MINOR The primary source is invalid; backup source valid and selected.
ATLAS 830 System Manual Section 6, System Event Logging Table 3.
Section 6, System Event Logging ATLAS 830 System Manual Table 4.
ATLAS 830 System Manual Section 6, System Event Logging Table 5. Ethernet Events Console Log String Category Out of memory CRITICAL Event Not enough memory for Ethernet driver Table 6.
Section 6, System Event Logging ATLAS 830 System Manual Table 6.
ATLAS 830 System Manual Section 6, System Event Logging Table 7. Circuit Backup Events (Continued) Console Log String Category Event Circuit Backup Test Call Connected INFO Circuit Backup test call was successfully connected to backup site Circuit Backup Test Call Passed INFO Circuit Backup test call was successfully maintained for test period Table 8.
Section 6, System Event Logging ATLAS 830 System Manual Table 9.
ATLAS 830 System Manual 5. Section 6, System Event Logging CAUSE CODE LOG ENTRIES Cause Code IEs that are non-Q.931 (i.e., the Coding Standard field is not 0) are logged with the following format: : code The coding standard field is one of the following: Reserved, National, or Local. Each Cause Code IE log entry ends with a location designation. Table 10 shows these designations. Table 11 through Table 13 provides a listing of system events. Table 10.
Section 6, System Event Logging 376 ATLAS 830 System Manual © 2002 ADTRAN, Inc.
ADTRAN UTILITIES ADTRAN delivers several PC software utilities along with the ATLAS 830. These utilities are located on the CD-ROM that came with your shipment. They also include MIB files (located in the MIB directory). Review the readme file (Readme.txt) for the latest information about the utilities. The utilities make it easier to interface with the terminal menu and transfer configuration files to and from TFTP servers. The utilities all run on Microsoft Windows 3.1 or higher.
Section 7, ADTRAN Utilities 1. ATLAS 830 System Manual TELNET UTILITY The Telnet utility delivered with the ATLAS 830 provides enhancements to standard Telnet programs that make it easier to work with ATLAS 830 options. Access the Telnet program remotely through the 10/100BaseT Ethernet port. For a detailed description of how to work with the Telnet program, refer to Navigating the Terminal Menus in the User Interface Guide section of this manual.
ATLAS 830 System Manual Section 7, ADTRAN Utilities Session Menu Click on SESSION to open the Telnet session. Connect Opens dialog box for setting HOST NAME and PORT parameters for a Telnet session. Also lets you EDIT ENTRY, ADD NEW entry, and DELETE stored entries. When the parameters are set, click CONNECT to make the connection. Click CANCEL to end the session. Host Name Accepts and stores host names. You may either enter a descriptive name, an IP address, or a domain name directly from this field.
Section 7, ADTRAN Utilities ATLAS 830 System Manual Connect Establishes the Telnet session. Disconnect Terminates the Telnet session. To re-establish the session, select CONNECT from SESSION MENU or press ENTER three times. This action restores the previous connection. Transfer Cfg This feature is used with ADTRAN products primarily for sending configuration files to the unit. Exit Ends the Telnet session and closes the Telnet screen. Edit Menu Provides COPY and PASTE commands.
ATLAS 830 System Manual Section 7, ADTRAN Utilities Save Buffer As Save screen capture to a file. Screen Capture Copies the text on the current Telnet screen to the clipboard. You can open any word processor and paste the clipboard contents into the program. This option is helpful when debugging. Help Menu Provides on-line help for using the ADTRAN Utilities. Contents Opens the on-line help. IP Status Displays the local port address and the status of the connection.
Section 7, ADTRAN Utilities ATLAS 830 System Manual VT 100 menus include SESSION, EDIT, PORT, OPTIONS, CAPTURE, and HELP (see the menu tree in Figure 2).
ATLAS 830 System Manual Section 7, ADTRAN Utilities Edit Menu Identical to the Telnet EDIT MENU (see Edit Menu on page 380). Port Menu Changes serial COM port SETTINGS. Provides data rate settings from 300—57600 bps. Options Menu Provides terminal screen commands. Refresh Screen Redraws the screen. Connect Provides the options TRANSMIT WAKEUP and TRANSMIT REFRESH. Transmit Wakeup Provides a control sequence that puts the ATLAS 830 Control Port online in terminal mode.
Section 7, ADTRAN Utilities 3. ATLAS 830 System Manual TFTP SERVER The TFTP Server utility transfers ATLAS 830 configuration files to and from a TFTP server. You can install this program on a PC running any version of Microsoft Windows. The configuration of an ATLAS 830 can be saved offline as a backup file. The saved file may also be used to send the same configuration to multiple ATLAS 830 units.
ATLAS 830 System Manual Section 7, ADTRAN Utilities Only one configuration transfer session (upload or download) may be active at a time. The TCP/IP parameters are not saved or overwritten as part of an ATLAS 830 unit’s transferred configuration to allow sending identical configurations to multiple units. When you start this program, a port is automatically opened. Server Menu Provides enable, disable, abort, and exit options. Enable Enables the TFTP server.
Section 7, ADTRAN Utilities ATLAS 830 System Manual Meter Field The XMIT meter provides a visual record of the transfer process. Log Field This field displays a record of all of the events that occur during the time the TFTP Server is enabled. Use the scroll bar to move up and down the list. To clear the information in this field, select CLEAR LOG from the PRINT LOG menu. Save this information to a file before deleting it with the ...TO CLIPBOARD command. 386 © 2002 ADTRAN, Inc.