Specifications

Basic Mode Command Set Command Reference Guide

show snmp

Use the show snmp command to display the system Simple Network Management Protocol (SNMP)

parameters and current status of SNMP communications.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Command Modes

> or # Basic or Enable Command Mode

Command History

Release 1.1 Command was introduced.

Usage Examples

The following is an example output using the

show snmp

command for a system with SNMP disabled and the

default Chassis and Contact parameters:

show snmp

Chassis: Chassis ID

Contact: Customer Service

SNMP logging is DISABLED

0 Rx SNMP packets

0 Bad community names

0 Bad community uses

0 Bad versions

0 Silent drops

0 Proxy drops

0 ASN parse errors