Specifications

Command Reference Guide Ethernet Interface Configuration Command Set

crypto map <mapname>

Use the crypto map command to associate crypto maps with the interface.

When you apply a map to an interface, you are applying all crypto maps with the given

map name. This allows you to apply multiple crypto maps if you have created maps which

share the same name but have different map index numbers.

For VPN configuration example scripts, refer to the technical support note

Configuring VPN located on the NetVanta 3000 Series System Manual CD provided with

your unit.

Syntax Description

Enter the crypto map name that you wish to assign to the interface.

Default Values

By default, no crypto maps are assigned to an interface.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), virtual

frame relay sub-interfaces (fr 1.20), and loopback interfaces

Command History

Release 4.1 Command was introduced