Specifications

Command Reference Guide T1 Interface Configuration Command Set

remote-loopback

Use the remote-loopback command to configure the interface to respond to loopbacks initiated by a

remote unit (or the service provider). Use the no form of this command to disable this feature.

Syntax Description

No subcommands.

Default Values

By default, all interfaces respond to remote loopbacks.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: T1 (t1 1/1) and DDS (dds 1/1)

Command History

Release 1.1 Command was introduced

Usage Examples

The following example enables remote loopbacks on the T1 interface:

(config)#

interface t1 1/1

(config-t1 1/1)#

remote-loopback