Specifications

Frame Relay Interface Config Command Set Command Reference Guide

frame-relay lmi-n393dte <counter>

Use the frame-relay lmi-n393dte command to set the N393 LMI monitored event counter for the DTE

endpoint. Typical applications should leave the default value for this counter. Use the no form of this

command to return to the default value.

Syntax Description

Sets the counter value (valid range: 1-10)

Default Values

<counter> 4 events

Command Modes

(config-fr 1)# Virtual Frame Relay Interface Configuration Mode required

Command History

Release 1.1 Command was introduced

Usage Examples

The following example sets the N393 threshold for 5 events:

(config)#

interface frame-relay 1

(config-fr 1)#

frame-relay lmi-n393dte 5