Specifications

Command Reference Guide Frame Relay Interface Config Command Set

frame-relay lmi-type <type>

Use the frame-relay lmi-type command to define the frame relay signaling (LMI) type. Use the no form

of the command to return to the default value.

Syntax Description

<type>

Sets the signaling type for the endpoint

ansi

Annex D signaling method

auto

Automatically determine signaling type by messages received on the frame circuit

cisco

Group of 4 signaling method

none

Turns off signaling on the endpoint. This is used for dial-backup connections to

ADTRAN IQ and EXPRESS series products.

q933a

Annex A signaling method

Default Values

<type> ansi

Command Modes

(config-fr 1)# Virtual Frame Relay Interface Configuration Mode required

Command History

Release 1.1 Command was introduced

Release 2.1 Added signaling type

none

to provide support for dial-backup to ADTRAN IQ and

EXPRESS series products.

Usage Examples

The following example sets the signaling method for the endpoint to

cisco

(config)#

interface frame-relay 1

(config-fr 1)#

frame-relay lmi-type cisco