Specifications

PPP Interface Configuration Command Set Command Reference Guide

ip ospf network [broadcast | point-to-point]

Use the ip ospf network command to specify the type of network on this interface.

Syntax Description

broadcast

Set the network type for broadcast.

point-to-point

Set the network type for point-to-point.

Default Values

By default, Ethernet defaults to broadcast. PPP and frame relay default to point-to-point.

Command Modes

(config-interface)# Interface Configuration Mode

Valid interfaces include: Ethernet (eth 0/1), virtual PPP interfaces (ppp 1), virtual

frame relay sub-interfaces (fr 1.20), and loopback interfaces

Command History

Release 3.1 Command was introduced

Functional Notes

A point-to-point network will not elect designated routers.

Usage Examples

The following example designates a broadcast network type:

(config-ppp 1)#

ip ospf network broadcast