Specifications

Router (OSPF) Configuration Command Set Command Reference Guide
550 © 2003 ADTRAN, Inc. 61950860L1-35D
redistribute rip
Use the redistribute rip command to advertise routes from one protocol to another, regardless of the
routing protocol implemented on the routing domain. Using the rip keyword allows the propagation of RIP
routes into OSPF. Use the no form of this command to disable the propagation of the specified route type.
Syntax Description
rip Optional keyword that specifies the ADTRAN OS to import RIP routes into OSPF.
Default Values
By default, this command is disabled.
Command Modes
(config-ospf)# Router (OSPF) Configuration Mode required
Command History
Release 3.1 Command was introduced
Functional Notes
Redistributing RIP routes imports those routes into OSPF without the interfaces in question actually
participating in OSPF. The RIP routes imported this way are not covered by a network command and therefore
do not send/receive OSPF traffic.
Usage Examples
The following example imports RIP routes into OSPF:
(config)#
router ospf
(config-ospf)# redistribute rip