Specifications
Command Reference Guide Enable Mode Command Set
61950860L1-35D © 2003 ADTRAN, Inc. 61
debug sntp
Use the debug sntp command to enable debug messages associated with the Simple Network Time
Protocol (SNTP). All SNTP Packet Exchanges and time decisions are displayed with these debugging
events enabled. Debug messages are displayed (real-time) to the terminal (or Telnet) screen. Use the no
form of this command to disable the debug messages.
Syntax Description
No subcommands
Default Values
By default, all debug messages in the ADTRAN OS are disabled.
Command Modes
# Enable Command Mode
Command History
Release 3.1 Command was introduced
Functional Notes
The
debug sntp
command activates debug messages to aid in troubleshooting SNTP protocol issues.
Usage Examples
The following is an example output for the
debug sntp
command:
>
enable
#
debug sntp
#
config term
(config)#
sntp server timeserver.localdomain
2002.12.11 15:06:37 SNTP.CLIENT sent Version 1 SNTP time request to 192.168.1.1
2002.12.11 15:06:37 SNTP.CLIENT received SNTP reply packet from 192.168.1.1
2002.12.11 15:06:37 SNTP.CLIENT setting time to 12-11-2002 15:06:02 UTC
2002.12.11 15:06:37 SNTP.CLIENT waiting for 86400 seconds for the next poll interval