Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Section 5, User Interface - Menu Descriptions
61179605L5-5B 5-63
Restore Factory Defaults Menu
The Restore Factory Defaults menu (see Figure 5-44) is used to remotely restore the factory
defaults of the system.
CAUTION
This action is service affecting. If the system is accessed remotely
through a static IP address, the system resets and access is lost.
Figure 5-44. Restore Factory Defaults Menu
The Restore Factory Defaults menu options are shown in Table 5-45.
Table 5-45. Restore Factory Defaults Menu Options
Option Description Function
1 Restore This option is used to restore all SNMP settings to the
factory default settings.
2 Exit This option is used to return to the “System
Management Menu” on page 5-34. The factory defaults
are not restored.
Total Access 1240 - IPoE Fed 09/01/05 01:25
Unacknowledged Alarms: None
Restore Factory Defaults
WARNING! THIS IS SERVICE AFFECTING!
This defaults all TA1240 options EXCEPT Management IP Settings
and the unit will be restarted upon completion.
The restore operation may take several minutes.
1. Restore
2. Exit
Selection :
'?' - System Help Screen