Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Total Access 1240 Installation and Maintenance Practice
5-70 61179605L5-5B
Restore Factory Defaults Screen
The Restore Factory Defaults screen (see Figure 5-50) is used to restore the factory defaults of
the main circuit board card.
CAUTION
This action is service affecting. If the system is accessed remotely
through a static IP address, the system resets and access is lost.
Figure 5-50. Restore factory Defaults Screen
09/01/05 01:34
Total Access 1240
Restore Factory Defaults
WARNING - This may cause service to be interrupted!
This defaults only the SHDSL Ports Provisions.
Do you wish to continue (Y/N)?
'?' - System Help