Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Total Access 1240 Installation and Maintenance Practice
5-86 61179605L5-5B
SHDSL Loop 1 Remote Loopback Menu
The SHDSL Loop 1 Remote Loopback menu (see Figure 5-67), is used to perform and view
remote loopback tests. For troubleshooting purposes, the Total Access 1240 provides three
types of remote loopbacks:
•Dual-Sided
• Customer
•Network
Figure 5-67. SHDSL Loop 1 Remote Loopback Menu
The SHDSL Loop 1 Remote Loopback menu options are shown in Table 5-60.
Table 5-60. SHDSL Loop 1 Remote Loopback Menu Options
Option Description Function
1 Dual-Sided This option is used to initiate a remote dual-sided
loopback. For more information, refer to “Remote Dual-
Sided Loopback” on page 5-87.
2 Customer This option is used to initiate a remote customer
loopback. For more information, refer to “Remote
Customer Loopback” on page 5-87.
3 Network This option is used to initiate a remote network
loopback. For more information, refer to “Remote
Network Loopback” on page 5-87.
09/01/05 00:06
Total Access 1240
SHDSL Loop 1 Remote Loopback
1. Dual-Sided
2. Customer
3. Network
Selection:
'N' - Next Loop 'P' - Prev Loop 'S' - Select Loop '?' - System Help