Modem Installation And Maintenance Practice
Table Of Contents
- Total Access 1240 Installation and Maintenance Practice
- Front Matter
- Section 1, Introduction
- Section 2, Application Guidelines
- Section 3, Installation
- Section 4, Provisioning Defaults
- Section 5, User Interface
- Introduction
- System Management
- Logging on to the Total Access 1240
- Menu Structure
- Menu Navigation
- Menu Trees
- Menu Descriptions
- Configuration Screen
- Bridge Circuit Management Menu
- System Management Menu
- SHDSL Ports Menu
- System Alarm Log Screen
- Contact Information Screen
- Section 6, Maintenance
- Section 7, Specifications
- Appendix A, Declaration of Conformity
- Appendix B, SCA File Format
- Appendix C, Warranty
Section 5, User Interface - Menu Descriptions
61179605L5-5B 5-25
Speed Mode Menu
The Speed Mode menu (see Figure 5-18) provides options to choose the Ethernet speed.
Figure 5-18. Speed Mode Menu
NOTE
The speed mode displayed in the title indicates the current speed
mode being viewed or provisioned.
The Speed Mode menu options are shown in Table 5-15.
Table 5-15. Speed Mode - 100Base Menu Options
Option Description Function
1 Auto Negotiate This option sets the system to automatically detect the
speed of the attached device.
2 100Base This option sets the Ethernet interface to transmit and
receive at 100 mb/s.
3 10Base This option sets the Ethernet interface to transmit and
receive at 10 mb/s.
Total Access 1240 - IPoE Fed 09/01/05 03:44
Unacknowledged Alarms: None
Speed Mode - 100Base
1. Auto Negotiate
2. 100Base
3. 10Base
Selection :
'?' - System Help Screen