Total Access User Interface Guide

Page 68 © 2002, ADTRAN, Inc. 64200600L1#T-31A
Total Access 600R User Interface Guide (UIG)
Ethernet IP Setup
Ethernet IP Setup Instructions
Step Action
1
From the Main Menu, select R
OUTER
, select C
ONFIG
, and then select
E
THERNET
.
2
Press
Enter
on the
P
RIMARY
IP [+]
option to enter primary ethernet con-
figuration.
3 Set the IP ADDRESS of the Ethernet port.
4 Set the S
UBNET
M
ASK
of the Ethernet port.
5 Set the D
EFAULT
G
ATEWAY
of the Ethernet port if needed.
6
RIP
on the Ethernet is disabled by default. If
RIP
needs to be enabled,
press Enter on RIP [+]
7 Press the left arrow key to return to the main Ethernet menu.
8
If the Total Access 600R needs additional secondary IP addresses,
press
Enter
on
S
ECONDARY
IPS
[+].The Total Access 600R supports up
to 10 additional LAN segments.
Enter each additional secondary IP address and subnet mask. Press "I"
to insert additional entries.