User Manual
Table Of Contents
- System Description
- Microwave Path Engineering Basics
- Engineering Guidelines
- Network Turnup Procedure
- User Interface Guide
- 1. Navigating the Terminal Menu
- 2. Terminal Menu and System Control
- 3. Menu Descriptions
- >TRACER System Status
- >Main Menu
- >TRACER System Configuration
- >TRACER Link Performance History
- >T1A Status/Configuration/Loopback
- >T1A Performance History
- >T1B Status/Configuration/Loopback
- >T1B Performance History
- >T1C Status/Configuration/Loopback
- >T1C Performance History
- >T1D Status/Configuration/Loopback
- >T1D Performance History
- Troubleshooting Guide
Section 5, User Interface Guide TRACER 4206 System Manual
42 © 2002 ADTRAN, Inc. 612804206L1-1B
Navigating using the Keyboard Keys
You can use various keystrokes to move through the terminal menu, to manage a terminal menu session,
and to configure the system.
Moving through the Menus
Session Management Keystrokes
2. TERMINAL MENU AND SYSTEM CONTROL
Password Protection
The TRACER 4106/4206 provides optional password protection of the terminal interface. If enabled, a
password prompt is presented at power-up, reboot, modem logout, or after ten minutes of inactivity on the
terminal. Password protection is enabled and a password is defined via the system configuration menu.
To do this... Press this key...
Move up to select items Up Arrow
Move down to select items Down Arrow
Edit a selected menu item Enter
Scroll through configuration parameters for a menu item Spacebar
Left/Right Arrows
P or N (Prev/Next)
Cancel an edit Escape
Return to Main Menu page M
To do this... Press this key...
Log into a session Spacebar
Refresh the screen
To save time, only the portion of the screen that has changed is refreshed.
<Ctrl + L>
All TRACER 4106/4206 systems are shipped factory default with password protection
disabled.