User Manual

Section 5, User Interface Guide TRACER 4205 System Manual
40 © 2002 ADTRAN, Inc. 612804205L1-1A
3. MENU DESCRIPTIONS
The remainder of this section describes the TRACER 4205 menus and submenus.
>TRACER SYSTEM STATUS
Figure 2 shows the TRACER System Status menu page. Status of major system components for both sides
of the TRACER link are displayed, but no configuration can be performed from this view.
Figure 2. TRACER System Status
The top of the TRACER System Status menu page displays the elapsed time the TRACER 4205 system
has been operational since the last power reset. Located directly beneath the ADTRAN Technical Support
phone number is a graphical indicator of the status of the TRACER 4205 DS3 and RF links (as reported by
both the local and remote units). The
DS3 labels will be reverse highlighted if any error conditions exist on
that DS3 interface.
The status of the received radio link is indicated as RF UP or RF DOWN for each direction. The left portion
of the menu page reports the status of the local TRACER 4205 (the system where the active terminal is
attached). The right portion of the screen reports the status of the remote system. If the RF link is down
from the remote unit to the local unit,
LOCAL RX LINK ERROR will be displayed. If the RF link is down from
the local unit to the remote unit, or if the RF link status cannot be determined, REMOTE RX LINK ERROR will
be displayed.
The menu structure of the TRACER 4205 system is depicted below as follows:
> MENU PAGE
> MENU PAGE > MENU SELECTION
> MENU PAGE > MENU SELECTION > SUB-MENU