User's Manual

9
Cable Cover
Installing the Cable Cover
1. Align the le and right hinges of the cable cover onto the bottom rear
of the display.
2. Snap on the top section of the cable cover to the aligning clips.
3. With your ngers, turn the thumbscrews clockwise to tighten and lock
the cable cover onto the display.
Uninstalling the Cable Cover
1. With your ngers, turn the thumbscrews counter clockwise to loosen.
2. Once the thumbscrews are completely loosened, pinch the le and
right clips and pull the cable cover towards you.
3. Remove the cable cover o the le and right hinges.