User's Manual
13
Operation
Operate the display using the rotary control located on the front panel. A list of
the display controls and their functions is provided below.
On-Screen Display (OSD)
Accessing the On-Screen Display
To access the OSD, use the Rotary Control as outlined below:
• Turn Right/Le — With the on-screen display menu activated, turning
increases/decreases the value of the selected parameter. With the on-screen
display deactivated, turning activates the video source selection menu.
• Push — Accesses/selects on-screen display menu.
• Push and Hold — Exits on-screen display menu.
Operating On-Screen Display
e device OSD helps navigate through various device menus.
1. Press the Rotary Control to activate the OSD menu.
2. Rotate the Rotary Control to move up or down through the menu.
e parameter will be highlighted when selected.
3. Press the Rotary Control to enter the next level OSD.
4. Rotate the Rotary Control to increase or decrease the value of the selected
parameter, or to make a selection on dierent options.
5. To exit the OSD menu screen from the second — or third — level OSD
menu, select the Exit option. To completely exit the OSD, press and hold
the Rotary Control. If no keys are pressed, the OSD will automatically exit
aer the factory-set predetermined time (the time is customizable).
6. While the OSD menu is deactivated, rotate the Rotary Control to activate
the input signal selection menu. e current input signal will be indicated
by a dot. Rotate the Rotary Control to select the preferred input signal.
Input Selection List
• Digital RGB • HD/SD-SDI • C-Video
• Analog RGB • SOG • Wireless RGB
• S-Video • RGBS • Exit
• Component (Y/Pb/Pr)