User's Manual
17
Linking Transmitter to Auxiliary Display (for USA and
Canada Only)
Temporary Linking
Caution Equipment that employs RF communications may aect
the normal function of the transmitter. When choosing a
location for the transmitter, consult the “Electromagnetic
Compatibility” section of this manual to ensure proper
function.
e transmitter functions in the 4.9 – 5.9 GHz spectrum. As necessary,
remove or recongure other wireless devices from the environment, such
as cordless phones and 802.11a/n routers to make channels available for the
transmitter and display.
To link the display to the transmitter and thereby enable wireless
communication, any blue WiSe HDTV Transmitter token will suce.
1. Power on the transmitter and auxiliary display. e token LED shines
amber as the units perform startup functions.
2. Insert the token into the token slot on the transmitter. e token LED
continues to shine amber as it writes the data.
3. When the token LED turns green, remove the token from the transmitter.
4. Within 2 minutes, insert the token into the token slot on the auxiliary
display. An audible tone will sound from the transmitter and the token
LED will change from amber to green when the display and transmitter
have been linked.