Operating instructions

APPAIRAGE DE VOTRE SOURCE BLUETOOTH
PAIRING YOUR BLUETOOTH DEVICE
VERBINDEN DER BLUETOOTH QUELLE
SUIVEZ IMPÉRATIVEMENT CES 3 ÉTAPES POUR RÉGLER VOTRE SYSTÈME
1 - Vérifiez que votre système Air-70 ou Air-90 est branché et que l’interrupteur ON/OFF est
sur ON. La led bleu doit clignoter.
2 - Allez dans le menu réglage, sous-menu bluetooth, de la source audio que vous souhaitez
appairer avec votre système Air. Après quelques instants, le système Air apparaitra sous le
nom ADVANCE ACOUSTIC. Sélectionnez le et valider sa connexion. Aucun code Pin n’est
nécessaire. Lorsque l’appairage est réalisé, la led bleu devient fixe.
3 - Passer votre périphèrique audio en mode lecture et profitez d’une restitution sonore de
qualité “Airblue Certified“ grâce à la technologie Apt-X Bluetooth.
Si vous vous éloignez votre périphèrique audio à une distance hors de portée de votre
système Air, la liaison bluetooth se désactivera et vous devrez répéter l’étape 2 pour vous
reconnecter. Si vous souhaitez changer de périphèrique Bluetooth, vous devez désactiver la
connexion du premier et activer la connexion du second via les menus réglages respectifs.
TO FINE TUNE YOUR SYSTEM, FOLLOW THOSE 3 STEPS
1 - Check that your Air-70 or Air-90 is correctly plug on an outlet and switch ON the amplifier
located on the back of the right speaker. The blue led is flashing.
2 - Go to the Bluetooth Manager of your iPhone, iPod touch, iPad, tablet, smartphone, PC or
MAC computer, then go on the bluetooth settings. You will see a new bluetooth connection
under ADVANCE ACOUSTIC name. Confirm that you choose it, after few seconds, your
audio device is pairing with the Air system. If pairing is ok, then, the blue led of the Air ampli-
fier will be fixed. You don’t need any Pin code confirmation.
Your Air-70 or Air-90 is now connected and ready to play music! Just play music on your
device as you normally would and the sound will come out of your Air system.
If you move out of range or turn off the Bluetooth feature on your audio device, the Bluetooth
Music Receiver will disconnect from your device.
To reconnect, simply access the Bluetooth Manager on your device and select the ADVANCE
ACOUSTIC connection.
VERBINDEN DER BLUETOOTH QUELLE
Um das System richtig einzustellen, folgen Sie bitte den folgenden 3 Schritten
1 - Stellen Sie sicher, dass Ihr System korrekt an eine sichere Steckdose angeschlossen ist.
Stellen Sie nun den Power Schalter auf der Rückseite des rechten Lautsprechers auf „ON“.
Die blaue LED blinkt.
2 - Wählen Sie nun die Bluetooth Einstellungen Ihres Quellengerätes (iPhone, iPod
touch, iPad, Tablet, Smartphones, PC oder MAC Computer). Sie finden unter Bluetooth
Verbindungen „ADVANCE ACOUSTIC“. Bestätigen Sie die Verbindung, nach einigen
Sekunden wird Ihr System mit der Quelle gepaart. Sie brauchen dazu keinen Pin Code einzu-
geben. Bei korrekter Verbindung leuchtet die LED stetig und blinkt nicht mehr. Ihr System ist
nun bereit Musik wiederzugeben. Geben Sie lediglich die Musik auf Ihrem Quellgerät wieder,
die Musik kommt dann aus dem Lautsprecher-System.
Sollten Sie das Quellgerät außerhalb der Bluetooth-Reichweite bewegen oder die Bluetooth
Verbindung trennen, wird das Quellgerät vom Lautsprecher-System getrennt. Für eine erneu-
te Verbindung wiederholen Sie einfach die Verbindungsprozedur.