Service manual
32 - FORM NO. 56043098 - Convertamatic
™
24C, 24D, 26C, 26D, 28C, 28D
RECOVERY SYSTEM
RECOVERY TANK REMOVAL
1 Follow steps 1-5 in the Vacuum Motor Removal section.
2 Disconnect Recovery Tank fl oat switch(es). NOTE: Disconnect any other options installed on the tank.
2 See Figure 6. Remove the Screw (F) and Tank Cable (G) and allow the tank to swing down to the side of the battery compartment box.
3 Remove the Recovery Tank Drain Hose (H).
4 Disconnect the Squeegee Hose (I) from the tank.
5 Support the tank and remove the (3) (J) Screws that attach the tank to the hinge and pull the tank free from the machine.
FIGURE 6